Loading...
The URL can be used to link to this page
Your browser does not support the video tag.
Home
My WebLink
About
20-1187
D Q City of Zephyrhills PERMIT NUMBER 5335 Eighth Street Zephyrhills, FL 33542 BAR-001187-2020 Phone: (813)780-0020 Issue Date: 02/17/2021 Fax: (813)780-0021 Permit Type: Add/Alter (Residential) Property Number Street Address 1126 210010 12600 0080 38039 7Th Avenue Owner Information - Permit Information Contractor Information Name: ANTHONY LAEZZA Permit Type:Add/Alter(Residential) Contractor: HOMEOWNER Class of Work:Add/Alter Residential Address: 38039 7Th Ave Building Valuation:$1,700.00 ZEPHYRHILLS,FL 33542 Electrical Valuation:$200.00 Phone: (813)312-3612 Mechanical Valuation:$0.00 Plumbing Valuation:$0.00 /`//� I ��•� Total Valuation:$1,900.00 I Total Fees:$140.25 Amount Paid:$140.25 j Date Paid:2/17/2021 11:39:26AM f U Project.Description ENCLOSE CARPORT CONVERT TO SUNROOM 198 SQ FT W/ELECTRIC Application Fees Electrical Plan Review Fee $22.50 Building Plan Review Fee $24.25 Electrical Permit Fee $45.00 Building Permit Fee $48.50 REINSPECTION FEES: (c)With respect to Reinspection fees will comply with Florida Statute 553.80(2)(c)the local government shall impose a fee of four times the amount of the fee imposed for the initial inspection or first reinspection,whichever is greater,for each subsequent reinspection. Notice: In addition to the requirements of this permit, there may be additional restrictions applicable to this property that may be found in the public records of this county, and there may be additional permit required from other governmental entities such as water management, state agencies or federal agencies. "Warning to owner:Your failure to record a notice of commencement may result in your paying twice for improvements to your property.If you intend to obtain financing,consult with your lender or an attorney before recording your notice of commencement." Complete Plans,Specifications add fee Must Accompany Application.All work shall be performed in accordance with City Codes and Ordinances. NO OCCUPANCY BEFORE C.O. NO OCCUPANCY BEFORE C.O. C NTRA T R SI NATURE PE IT OFFICE PERMIT EXPIRES IN 6 MONTHS WITHOUT APPROVED INSPECTION CALL FOR INSPECTION - 8 HOUR NOTICE REQUIRED PROTECT CARD FROM WEATHER DISCLOSURE STATEMENT FOR OWNER CITY OF ZEPHYRHILLS—BUILDING DEPARTMENT I, A 4-ka ish, - L-v-, have read and fully understand and agree to the provisions of this linstrument. The undersigned states and affirms that he or she is desirous of constructing, renovating, adding to or reroofing his or her own domicile,that he or she actually occupies,or will occupy by said domicile, and same is not for rent, lease or sale. That he or she shall comply with the following conditions: 1. That the owner and he or she alone shall act as the builder for all phases of construction. 2. That the owner will comply with all provisions of the City of Zephyrhills ordinances and codes pertinent to the building. 3. That in the event various phases of construction are subcontracted, he will engage only properly licensed subcontractors and will personally supervise such work. 4. That in the event the Building Inspector shall require corrections to be made, the owner will assume full responsibility to insure they are made, and upon completion Will call for a reinspection before proceeding with the building. 5. That the owner shall assume full responsibility for the construction and will not expect supervision of his work from the City of Zdphyrhills;Building Department. 6. That prior to final inspection any additional fees, including reinspection fees, must be paid In full. A written request from this office shall constitute an official notice to pay additional fees. 7. That the owner shall comply with all City, State and Federal laws In regard to social security, workman's compensation, lien laws,etc.,where applicable. 8. That the owner shall comply with all the safety codes issued by the Florida Industrial Commission. 9. State law requires construction to be done by licensed contractors. You have applied for a permit under an exemption to that law. The exemption allows you, as the owner of your property,to act as.your own contractor with certain restrictions even though you do not have a license. You must provide direct onsite supervision of the construction yourself. You may build or improve a one-family or two-family residence or a farm outbuilding. You may also build or improve a commercial building, provided your costs do not exceed $75,000. The building or residence must be for your own use or occupancy. It may not be built or substantially improved if for sale or lease,which is a violation of this exemption. You may not hire an unlicensed person to act as your contractor or to supervise people working on your building. It is your responsibility to make sure that people employed by you have licenses required by state law and by county or municipal licensing ordinances. You may not delegate the responsibility for supervising work to a licensed contractor who is not licensed to perform the work being done. Any person working on your building who is not licensed must work under your direct supervision and must be employed by you, which means that you must deduct F.I.C.A. and withholding tax and provide worker's compensation for that employee,all as Prescribed by law. Your construction must comply with all applicable laws, ordinances, building codes,and zoning regulations. el-OWNER'S SIGN TORE DATE ADDRESS 'K-:L PHONE !EZ \2) I WITNESS PERMIT INWeafornWOwnemAffidaviWov07 h • !r City o-Ze ihyrhilIs BUILDING PLAIN REVIEW COMMENTS Contractor/Homeowner: �d hZ- Date Received: 1 ! 1 1— d� Site: 3 go 3 7�A Permit,Type: lac f C. Approved w/no comments:❑ Approved w/the below comments: Denied w/the below comments: O (OL' f f �'e —Fn il- G 9 V This comment she shall be kept with the permit and/or plans. Kal n er-Plans Examiner Date Contrac or"/ omeowner (Requir mments are present) 813-780-0020 City of Zephyrhills Permit Application FaX-813-780-0021 Building Department Date Received t Phone.Contact_for.Permitting — p OwneebWamee ' / -Ownerftone Number. Ownees'Address• �0 © h�� er:Phone-Number Fee Simple Titleholder Name `(\ -��� ner Phone Numt9er'., Fee Simple Titleholder Address �� ` JOB ADDRESS oJ� LOT•#::- SUBDIVISION PARCEL ID#, (OBTAINED'FROM-PROPERTY-�TAXNOTICE),;' - WORK•PROPOSED NEW CONSTR_ ADD/ALT; SIGN ,,DEMOLISH , e INSTALL. ,'.e': -REPAIR s:PROPOSED USE Q SFR'' Q' .:. Comm: Q'�''.:.OTHER.. TYPE OF CONSTRUCTION = BLOCK- FRAME :.. - 0 " STEEL DESCRIPTION OF WORK;' C`O S Q \h C.C'�.�` BUILDING.:SIZE;, �a:•: S.. SUVIr ✓V�.. 1 I" "�-mil'. e/., ,-;,S FOOTAGE. . . HEIGHT =BUILDING $ �jQ VA UATION 0F` . AL',CONSTRUCTION - =ELECTRICAL' $ d " .AMP.•.SERVICE . _.-: 'PROGRESS ENERGY. =,0:. W:R:E:C; =PLUMBING $ . Qp =MECHANICAL : $ . VALUATION OF MECHANICAL INSTALLATION =GAS = ROOFING Q -:.-SPECIALTY:= OTHER; pqle- FINISHED FLOOR ELEVATIONS FLOOD ZONE'AREA =YES ' NO BU DER COMPANY' SIGNATURE 'REGISTERED Y/-N " FEE CURREN., Address :•License ELECTRICIAN6.- COMPANY . _ . . � SIGNATURE REGISTERED :.:Y'/. N <::, :FEecuw2Er.. Address :r :`. .•,.,.License:# PLUMBER COMPANY :- SIGNATURE ,;REGISTERED Y:/.N FEE.CURREK� Address MECHANICAL.: .:. COMPANY. '. SIGNATURE, REGISTERED, Y'/ N-_ FEE,CURRREn Y/N. Address License#' ` OTHER COMPANY. SIGNATURE 'REGISTERED '' ' 'Y! N. '' 'FEE'CURREN' Address ?License.#.: ... RESIDENTIAL Attach,(2)'Plot Plans;(2)sets of.Building,Plans;(1-)set-.of Energy Forms;.R-0=11Vs.2emiit for newponst. on,, j.- Minimum ten(10)w&king days after submittal date. Required.onsite;Construction Plans,'Stormwater Plans w/.'Silt Fence°lnstalied; Sanitary Facilities&1 dumpster;,Site Work Permit for subdivisionsfiarge projects COMMERCIAL Attach(2)complete sets�of Building',Plans,plus;a,'.Cife Safety Page;(1)set of Energy Forms.,R-O-W°Pemait-for,new-construction:`. Minimum ten(10)-working`days after'submittal=date:`"Requtied'onsite,C;onstructibn Plans;;Storrnwater Plans'w/Siit'Fenc6installed'' Sanitary-Facilities&.1-dumpster.Site Work:Permlt for all new projects.All commerclaf regyi�ements,mpsltlfi SIGN PERMIT Attach(2)sets;of.Engineered Plans. _ *"*PROPERTY SURVEY-required for all-NEW construction.----------------- ' Directions: Fill ouf:application completely. ''•i., `s ; ` Owner&'Contractor sigri.back of application,notarized J If over$2500,a:Nottce of Commencement Is required.- (A/C.upgrades:over.$7500) " Agent(for the contractor)or Power of Attorney(for the owner)would be someone with notarized letter from owner authorizing same OVER THE COUNTER PERMITTING (copy:of contract�required) Reroofs if shingles Sdwers Service Upgrades A/C Fences(Plot/Survey/Footage) '•' • s =`�=� '-=°_"=`== "-=�-?�� • •'�- 71_.a�i'1l�i1i1'"..i�iiiai7:sFA . ,i:"' ""•••�}� Driveways-Not over Counter if on public roadways..needs ROW n'A.±•'.FiCiift{!;`aV`I�1!'1 U:.',i!Kn`:YJi{ •''%',:';:::''• NOTICE OF DEED RESTRICTIONS: The undersigned understands-that-this permit-may be subject to"deed"restrictions" which may be more restrictive than County-regulations. The undersigned assumes'responsibilityfor-compliance with any applicable deed restrictions.- UNLiCENSED'°CONTRAiCTORS-AND"CONTRACTOR -RESPONSIOILITIES:=---if-the-ovimer:has-'hired-a contractor'-or contractors to undertake work, theyemay:be,requiredft be licensed in-accordance with state and local regulations,.:, f,,the. contractor1s not licensed-as-required by law, both the owner and-contractor-may be-cited-for,a misdemeanor violation under state law. If the owner or intended::contractor are uncertain as to what•licensing requirements.may apply,for.the lntended'work;they.are advised to contact the Pasco County-Building'Inspection Division Licensing Section at 727--847- 8009. Furthermore,, if the owner-,ha&hired>.a ,contractor,or contractors, he is advised to have'the,contractor;.(s) sigm , . portions.of.the-"contractor Block"_of.thi s.application:for.which they.will.be:responsible. if you, as the-owner sign as the contractor, that may be-an indication that he is not properly-licensed and is not entitled-to permitting privileg(es in Pasco County. TRANSPORTATION IMPACTIUTILITIES,IMPACT AND:RESOURCE-RECOVERY FEES: The undersigned-understands that Transportation-,Impact Fees-and-Recourse-Recovery.-Fees:may.apply-to-the:constructionr of new buildings, change'of use in existing.-buildings„or expansion of.existing buildings, as.specified in Pasco'Courity-Ordinance number 89-07 and 90=0.7,.as amended. ,The.undersigned•-also_.und6rstands,,:that:such fees,.as may-be:Oue, will be.identified at-thwtime,•of permitting. It is further,understo`od'thatTransp`ortation.Im pact Fees and Resource Recovery.Fees must be paid:prior to receiving V"certificate of.occupancy":or final,power release. If'the-projectadoes,not>involve a certificate-of:occupancy:or: final power release, the:fees must be paid prior to permit issuance. -Furthermore,.4fPasco County Water/Sewer Impact fees.are..due,theymust:be:paid'prior to permit;issuance'inaccordance-with!applicable,-Pasco County ordinances:; CONS 'RUCTION t1EN IAW.rjChapter 713;;Ftorida Statutes;as..amended) If valuation of inrork is$2,5.00.00.;or.more, l certify-.#hat:.I,::.the_applicant have-been--provided with.a,.copy. of:..the.."Florida'.C:onstruction-_Lien Law—'Homeowners Protection Guide"prepared by the Florida Department of-Agriculture,and:Consumer Affairs. If Ahe applicant.is someone other than-the'mowner";-I cerfify_that'I:have,Obtained wcopyof the,above-described docuMent�andipromise-in:good`%ith to deliver-ltto•the"owner":prior�to commencement,. CONTRACTOR'S/OWNER'S AFtrIDAVIT:.'l certify.that all.,the informati ri in-this'application is;accurate-.and'.that all-work will be'done-in compliance with,all applicablexlaws regulating constructio t, zoning,anid;J6 id`development: "Applibatlon".!s hereby made to. obtain a permit to do,;work`:artd--instaliation:t-as)=indicated. I -certify that- no`work or installatlori-has commenced prior to issuance of a:permit and that all work will,be performed-to-meet-standards of all laws regulating construction, County and>'Clty=cbdes,,zoning,,regulations,.and•land development regulations in�the jurisdiction:.,:l; also } certify,that I understand:that the regulations of other:governmentagencies may.apply,to the:intended work, and-that it is my responsibility.to identify what actions 1 must take.to.be in compliance. Such-agencies:Include°but are not.Iimited,to:- Department of Environmental _Protection-Cypress Bayheads, Wetland Areas and Environmentally sensitive -Lands,WaterMastewater Treatment. - Southwest Florida. Water'`Management District-Wells; 'Cypress -Bayheads, Wetland Areas, -Altering Watercourses. . - Army Corps of Engineers-Seawalls;Docks, Navigable,.Waterways.; Department of Health &.Rehabilitative Services/Ehvironmental-Health-Unit=Wells, Wastewater:Treatment, Septic Tanks. -.. MEnvironmentat.-Protection:Agency7ASbestos.abatement.;.. - federal AViation-Authority-Runways i understand-1hat the following-restrictions applyto the,use.of fill: Use:ofifllhis not aliowec!"ln:Flgod,Zone"V"'uniess:expcesslypermitted. If-the-till -material--is.'to:be used.in-flood-Zone,"A% it is-.,.Under-stood..that a:-drairiage•plan-addressing,a "compensating,volume"--will,�be:subrnitted-at time of permitting which-is.prepared by a professional:-engineer -licensed'bythe�State-of.Florida if the fill material is`to be used An•-Flood:Zone "A",in=connection with a permitted building using stem wall , construction; I certify,that4fll-.will'be:•used�:only to:filt,the.area!within-the stem wail. if till material into to, used°in..any area, I certify 1hat-use-:of such-fill--wiIV not adversely-affect adjacent properties.. If use.of fill'is�°found:to�adversely:.!lffect:adjacent.,propertle.s,:.the,owner.may be:cited for violating the conditions:ofthe building".petmit-assued-.uriderahe-attached permit-application; for lots-less than one (1) acre.which.ace_eieyatedby,Mill,an engineerecl;dra`rnageplan`is requited. If I am the AGENrFOR."TWOWNER, I promise-:in-.good''.fa!th?t6,lriformahe:owner of the.•permitting-conditions setforth,in this-affidavit-prior-to commencing construction. I understand that'6 s6oarate'permit.may be'required:for-electrical work, plumbing; signs,•-wells;.pools,•air conditioning,.,gas,;or.other:,installations..not..speeMcally..included in:.the:.:application:'.SA permit-issued shall be construed to be a license to-proceed:with the-work-and not as authorlty to.-Vlolate, cancel,.alter, or setaside any provisions-.of the technical-codes,-nor-.shail-issuance of.a permit prevent the,Building Official from-thereafter requiring.a correction-.of-errors!n plans, construction or violations':of.any codes,- Every-perrilt-lssued-shall become,'lnvalid unless the work authorized by such-permit is.-.commenced within*six months-of.permit-issuance, or 4-work:authorized by the;:permit,issuspended or abandoned.-for a_period=of six(6)-months-after.the.time-the.:work-is:commenced:-•An.ex'tension. may be requested, in writing, from the Building Official for.a,.period not.to exceed ninety(90) days and will.-demonstrate justifiable cause for the'extension... If workiceasessforninety.',(.66 ..consecutive days;-the job is considered abandoned.. WARNING TO OWNER: YOUR:FAiLURE TO%RECORD.A NOTICE-AF-COMMENCEMENT.MAY RESUL•T;*IN.;YOUR PAYIN.G,7WICE?FOR IMPROVEME,'TS TO_YO:UR�PROPERTY:.1iF.YOU;IN7E 1IY1,T THIN fINANCiNG-'CONSULT. -- =WITH��YQURI--ENDEti�fliR:.AN ATTORNEY>BEFORE.RECORDING:,YOUR�NO'fiCE.OF:C.OMMEN:CItMENT. FL0RiD'A'1JURAT(F.S: `t9°+O OWNER:OR;AGENT CONTRACT,092Z m Sub bed:and.swom: Affirme far.,e me this-. Subsoribed.aiid sworn tq,(or afiin»ed)3tiefore me.ttiis Zo1�by_. tLc( by =: Who is/are.person�A v�vtni to me or tia§%have proiiuced' . Who'tslare pars no aUy known-tome orhaslhav produceii' as identification. ..aµ~'"` .- "a"s ideittiflcatiori: C4�' •'� Y�"`^�J � Notary Public Notary:Public. Commission No. Commissiom No. N —=k—��— et a n�S+-iBi91� Name o otar3ttyped;printed or stamps y - ,. MEGHAN EIAINE WIWJ M� * ' Il1Y COMMESSEON O GG 311t#9-., •s`s h;, 0 E)(PIRE$:March 31.2023 vw Bonded 7hru i9otary Pu6rSUndervvdt+w, FORM;R405-2020 RESIDENTIAL ENERGY CONSERVATION CODE DOCUMENTATION CHECKLIST Florida Department of Business and Professional Regulation Simulated Performance Alternative (Performance) Method Applications for compliance with the 2020 Florida Building Code, Energy Conservation via the Residential Simulated Performance Alternative shall include: ❑ This checklist ❑ Form R405-2020 report ❑ Input summary checklist that can be used for field verification (usually four pages/may be greater) ❑ ° Energy.Performance Level(EPL) Display Card(one page) ❑i HVAC system sizing and selection based on ACCA Manual S or per exceptions provided in Section R403.7 ❑ Mandatory Requirements(five pages) Required prior to CO: ❑ Air Barrier and Insulation Inspection Component Criteria checklist(Table R402.4.1.1.-one page) ❑ A completed 2020 Envelope Leakage_Test Report(usually one page);exception in R402.4 allows dwelling units of R-2 Occupancies and multiple attached single family dwellings to comply with Section C402.5 ❑ If Form R405 duct leakage type indicates anything other than "default leakage'; then a completed 2020 Duct Leakage Test Report-Performance Method(usually one page) 12/22/2020.6:45:10 AM EnergyGauge®USA 7.0.00-FlaRes202O FBC 7th Edition(2020)Compliant Software Page 1 of 1 FORM R405-2020 FLORIDA ENERGY EFFICIENCY CODE FOR BUILDING CONSTRUCTION Florida Department of Business and Professional Regulation - Residential Performance Method Project Name: r-3803 7th Ave Builder Name:p(wa'G)✓1PAi`� r,�v'�,U Street: 38039 7th Ave Permit Office: Zelabgrhiffs c / v U City,State,Zip: Zephyrhills,FL,33542 Permit Number: 11 6'7 Owner: Jurisdiction: 611600 Design Location: FL,Lakeland County: Pasco(Florida Climate Zone 2) 1. New construction or existing Addition 10. Wall TypeV45.0 sqft.) Insulation Area 2. Single family or multiple family Detached a.Frame-Wood,Exterior R=11.0 245.00 ftz b.N/A R= ft2 3. Number of units,if multiple family 1 c. N/A R= p2 4. Number of Bedroom�Bedrms In Addition) 0(0) d.N/A R= t2 5. Is this a worst case? No 11.Ceiling Types (198.0 sqft.) Insulation Area a.Under Attic(Vented) R=19.0 198.00 ft2 6. Conditioned floor area above grade(ft2) 198 b.N/A R= ft2 Conditioned floor area below grade(ftz) 0 c. = ft2 7. Windows(13.2 sqft.) Description Area 12. Ducts R ft2 a. U-Factor: Dbl,U=0.57 13.20 ft2 a.Sup:Attic, Ret:Attic,AH:Attic 6 15 SHGC: SHGC=0.24 b. U-Factor: N/A ft2 13.Cooling systems kBtu/hr Efficiency SHGC: a.Central Unit 24.0 SEER:15.00 c. U-Factor_ N/A ft2 SHGC: 14. Heating systems kBtu/hr Efficiency Area Weighted Average Overhang Depth: 2.000 ft. Area Weighted Average SHGC: 0.240 a.Electric Heat Pump 24.0 HSPF:8.50 8. Skylights Area c. U-Factor:(AVG) N/A ft2 15.Hot water systems-Replacement equipment SHGC(AVG): N/A a.Electric Cap:40 gallons 9. Floor Types (198.0 sqft.) Insulation Area EF:0.950 a.Slab-On-Grade Edge Insulation R=0.0 198.00 ft2 b. Conservation features b.N/A R= ft2 None c.N/A R= ft2 16.Credits Pstat Glass/Floor Area: 0.067 Total Proposed Modified Loads: 6.34 PASS Total Baseline Loads: 6.63 I hereby certify that the plans and specifications covered by Review of the plans and o 'Lfifi S7g this calculation are in compliance with the Florida Energy specifications covered by this 1+ +p Code. calculation indicates compliance ,,,��'''� with the Florida Energy Code. PREPARED BY: ' .._.._..............._.................. E_CalCs_P_I_t�6, IJ]c. Before construction is completed r DATE: February 12,..2021___.__.._._.__......_...............__._ this buildingwill be inspected for P compliance with Section 553.908 I hereby certify that this building, as designed, is in compliance Florida Statutes.. with the Florida Energy Code. COtj T�t� OWNER/AGENT: BUILDING O F �IAL: . DATE: DATE: ' - Compliance requires certification by the air handler unit manufacturer that the air handler enclosure qualifies as certified factory-sealed in accordance with R403.3.2.1. -Compliance requires an Air Barrier and Insulation Inspection Checklist in accordance with R402.4.1.1 and this project requires an envelope leakage test report with envelope leakage no greater than 6.00 ACH50 (R402.4.1.2). - Compliance with a proposed duct leakage On requires a Duct Leakage Test Report confirming duct leakage to outdoors, tested in accordance with ANSI/RESNET/ICC 380, is not greater than 0.030 On for whole house. 2/12/2021 9:03 AM EnergyGauge®USA 7.0.00-FlaRes202O FBC 7th Edition(2020) Compliant Software Page 1 of 4 FORM R405-2020 INPUT SUMMARY CHECKLIST REPORT PROJECT Title: Barker-38039 7th Ave Bedrooms: 0 Address Type: Street Address Building Type: User Conditioned Area: 198 Lot# Owner Name: Total Stories: 1 Block/Subdivision: #of Units: 1 Worst Case: No PlatBook: Builder Name: Rotate Angle: 0 Street: 38039 7th Ave Permit Office: Zephyrhills Cross Ventilation: No County: Pasco Jurisdiction: 611600 Whole House Fan: No City,State,Zip: Zephyrhills, Family Type: Detached FL, 33542 New/Existing: Addition Comment: CLIMATE Design Temp Int Design Temp Heating Design Daily Temp v Design Location TMY Site 97.5% 2.5% Winter Summer Degree Days Moisture Range FL,Lakeland FL_LAKELAND_LINDER 34 92 70 75 973 48 Medium BLOCKS Number Name Area Volume 1 Entire House 198 1386 SPACES Number Name Area Volume Kitchen Occupants Bedrooms InfilID Finished Cooled Heated 1 Sunroom 198 1386 No 0 0 1 Yes Yes Yes FLOORS # Floor Type Space Perimeter R-Value Area Tile Wood Carpet 1 Slab-On-Grade Edge Insulatio Sunroom 46 ft 0 198 ft2 ---- 1 0 0 ROOF / Roof Gable Roof Rad Solar SA Emitt Emitt Deck Pitch V # Type Materials Area Area Color Barr Absor. Tested Tested Insul. (deg) 1 Gable or Shed Composition shingles 209 ft2 32 ft2 Medium N 0.85 No 0.9 No 0 18.43 ATTIC V # Type Ventilation Vent Ratio(1 in) Area RBS IRCC 1 Full attic Vented 150 198 ft2 N N CEILING # Ceiling Type Space R-Value Ins Type Area Framing Frac Truss Type 1 Under Attic(Vented) Sunroom 19 Batt 198 ft2 0.1 Wood 2/12/2021 9:03 AM EnergyGaugeO USA 7.0.00-FlaRes202O FBC 7th Edition(2020) Compliant Software Page 2 of 4 FORM R405-2020 INPUT SUMMARY CHECKLIST REPORT WALLS Adjacent Cavity Width Height Sheathing Framing Solar Below 0—Ornt To Wall Type Space Value Ft In F_t In Qreg R-Value—F-action—Absor__GradeJo_ 1 NE Exterior Frame-Wood Sunroom 11 6 0 7 0 42.0 ftZ 0 0.23 0.45 0 2 SE Exterior Frame-Wood Sunroom 11 11 0 7 0 77.0 ftZ 0 0.23 0.45 0 3 SW Exterior Frame-Wood Sunroom 11 18 0 7 0 126.0 ft2 0 0.23 0.45 0 DOORS # Ornt Door Type Space Storms U-Value Width Height Area Ft In Ft In 1 SW Insulated Sunroom None .39 3 6 8 20 ftz WINDOWS Orientation shown is the entered,Proposed orientation. Wall Overhang V # Ornt ID Frame Panes NFRC U-Factor SHGC Imp Area Depth Separation Int Shade Screening 1 SE 2 Metal Low-E Double Yes 0.57 0.24 N 13.2 ftz 2 ft 0 in 0 ft 6 in None None INFILTRATION # Scope Method SLA CFM 50 ELA EgLA ACH ACH 50 1 Wholehouse Proposed ACH(50) .000267 138.6 7.6 14.28 .0997 6 HEATING SYSTEM # System Type Subtype Speed Efficiency Capacity Block Ducts 1 Electric Heat Pump/Existing/c Split Singl HSPF:8.5 24 kBtu/hr 1 sys#1 COOLING SYSTEM # System Type Subtype Subtype Efficiency Capacity Air Flow SHR Block Ducts 1 Central Unit/Existing/confirme Split Singl SEER: 15 24 kBtu/hr cfm 0.75 1 sys#1 HOT WATER SYSTEM # System Type SubType Location EF Cap Use SetPnt Conservation 1 Electric None Exterior 0.95 40 gal 40 gal 120 deg None SOLAR HOT WATER SYSTEM FSEC Collector Storage Cert # Company Name System Model# Collector Model# Area Volume FEF None None ftZ 2/12/2021 9:03 AM EnergyGauge®USA 7.0.00-FlaRes202O FBC 7th Edition(2020) Compliant Software Page 3 of 4 'FORM R405-2020 INPUT SUMMARY CHECKLIST REPORT DUCTS / --Supply— --Return-- Air CFM 25 CFM25 HVAC# �/ # Location R-Value Area Location Area Leakage Type Handler 'TOT OUT QN RLF Heat Cool 1 Attic 6 .15 ft2 Attic 5 ftz Prop.Leak Free Attic —cfm 5.9 cfm 0.03 0.50 1 1 TEMPERATURES Programable Thermostat:Y Ceiling Fans: CoolingH Jan r 1 Feb Mar Apr May ri Jun ri Jul X Augrl Se [ ]Oct Nov Dec Heatin Jan [X]Feb Mar Apr May Jun Jul AuSep []Oct Nov Dec Ventin Jan [[[[ ]]]]Feb HX Mar [X]Apr [ May Jun Jul [ Aug Se [X]Oct Nov Dec Thermostat Schedule: HERS 2006 Reference Hours Schedule Type 1 2 3 4 5 6 7 8 9 10 11 12 Cooling(WD) AM 78 78 78 78 78 78 78 78 80 80 80 80 PM 80 80 78 78 78 78 78 78 78 78 78 78 Cooling(WEH) AM 78 78 78. 78 78 78 78 78 78 78 78 78 PM 78 78 78 78 78 78 78 78 78 78 78 78 Heating(WD) AM 66 66 66 66 66 68 68 68 68 68 68 68 PM 68 68 68 68 68 68 68 68 68 68 66 66 Heating(WEH) AM 66 66 66 66 66 68 68 68 68 68 68 68 PM 68 68 68 68 68 68 68 68 68 68 66 66 MASS Mass Type Area Thickness Furniture Fraction Space Defadlt 8 Ibs/s .ft. 0 ftz 0 ft 0.3 Main 2/12/2021 9:03 AM EnergyGauge®USA 7.0.00-FlaRes202O FBC 7th Edition(2020) Compliant Software Page 4 of 4 FORM•R405-2020 ENERGY PERFORMANCE 'LEVEL (EPL) DISPLAY CARD ESTIMATED ENERGY PERFORMANCE INDEX* = 96 The lower the EnergyPerformance Index, the more efficient the home. 38039 7th Ave, Zephyrhills, FL, 33542 1. New construction or existing Addition 10. Wall Type and Insulation Insulation Area 2. Single family or multiple family Detached a. Frame-Wood,Exterior R=11.0 '245.00 ft2 b.N/A R= ft2 3. Number of units,if multiple family 1 c. N/A R= ft2 4. Number of Bedrooms 0(0) d.N/A R= ft2 5. Is this a worst case? No 11.Ceiling Type and insulation level Insulation Area a. Under Attic(Vented) R=19.0 198.00 ft2 6. Conditioned floor area(ft2) 198 b.N/A R= ft2 7. Windows— Description Area c. N/A R= ft2 a. U-Factor: Dbl,U=0.57 13.20 ft2 12.Ducts,location&insulation level R ft2 SHGC: SHGC=0.24 a.Sup:Attic, Ret:Attic,AH:Attic 6 15 b. U-Factor:• N/A ft2 SHGC: 13.Cooling systems kBtu/hr Efficiency c. U-Factor: N/A ft2 a.Central Unit 24.0 SEER:15.00 SHGC: d. U-Factor: N/A ft2 14. Heating systems kBtu/hr Efficiency SHGC: a. Electric Heat Pump 24.0 HSPF:8.50 Area Weighted Average Overhang Depth: 2.000 ft. Area Weighted Average SHGC: 0.240 8. Skylights Description Area 15.Hot water systems-Replacement equipment a. U-Factor(AVG): N/A ft2 a. Electric Cap:40 gallons EF:0.95 SHGC(AVG): N/A b. Conservation features 9. Floor Types Insulation Area None a.Slab-On-Grade Edge Insulation R=0.0 198.00 ft2 Credits(Performance method) Pstat b. N/A R= ft2 c. N/A R= ft2 I certify that this home has complied with the Florida Energy Efficiency Code for Building ES Construction through the above energy saving features which will be installed (or exceeded) `'0" in this home before final inspection. Otherwise, a new EPL Display Card will be completed based on installed Code compliant features. cw ._. ,:..._ t7. Builder Signature: Date: p► Address of New Home: City/FL Zip: ,wE��,s *Note: This is not a Building Energy Rating. If your Index is below 70, your home may qualify for energy efficient mortgage (EEM)incentives if you obtain a Florida Energy Rating. For information about the Florida Building Code, Energy Conservation, contact the Florida Building Commission's support staff. **Label required by Section R303.1.3 of the Florida Building Code, Energy Conservation, if not DEFAULT. 2/12/2021 9:03 AM EnergyGauge(D USA 7.0.t)0-FlaRes202O FBC 7th Edition(2020) Compliant Software Page 1 of 1 Florida Building Code, Energy Conservation, 7th Edition (2020) Mandatory Requirements for Residential Performance, Prescriptive and ERI Methods E ESS: 38039 7th Ave Permit Number: Zephyrhills,FL,33542 MANDATORY REQUIREMENTS -See individual code sections for full details. SECTION R401 GENERAL R401.3 Energy Performance Level(EPL)display card(Mandatory)The building official shall require that an energy performance level (EPL) display card be completed and certified by the builder to be accurate and correct before final approval of the building for occupancy. Florida law ❑ (Section 553.9085, Florida Statutes)requires the EPL display card to be included as an addendum to each sales contract for both presold and nonpresold residential buildings.The EPL display card contains information indicating the energy performance level and efficiencies of components installed in a dwelling unit.The building official shall verify that the EPL display card completed and signed by the builder accurately reflects the plans and specifications submitted to demonstrate code compliance for the building.A copy of the EPL display card can be found in Appendix RD. SECTION R402 BUILDING THERMAL ENVELOPE ❑ R402.4 Air leakage(Mandatory). The building thermal envelope shall be constructed to limit air leakage in accordance with the requirements of Sections R402.4.1 through R402.4.5. Exception: Dwelling units of R-2 Occupancies and multiple attached single family dwellings shall be permitted to comply with Section C402.5. ❑ R402.4.1 Building thermal envelopeThe building thermal envelope shall comply with Sections R402.4.1.1 and R402.4.1.2.The sealing methods between dissimilar materials shall allow for differential expansion and contraction. ❑ R402.4.1.1 Installation. The components of the building thermal envelope as listed in Table R402.4.1.1 shall be installed in accordance with the manufacturer's instructions and the criteria listed in Table R402.4.1.1,as applicable to the method of construction.Where required by the code official,an approved third party shall inspect all components and verify compliance. ❑ R402.4.1.2 Testing. The building or dwelling unit shall be tested and verified as having an air leakage rate not exceeding seven air changes per hour in Climate Zones 1 and 2,and three air changes per hour in Climate Zones 3 through 8.Testing shall be conducted in accordance with ANSI/RESNET/ICC 380 and reported at a pressure of 0.2 inch w.g.(50 pascals).Testing shall be conducted by either individuals as defined in Section 553.993(5)or(7), Florida Statutes,or individuals licensed as set forth in Section 489.105(3)(0,(g)or(i)or an approved third party.A written report of the results of the test shall be signed by the party conducting the test and provided to the code official.Testing shall be performed at any time after creation of all penetrations of the building thermal envelope. Exception: Testing is not required for additions,alterations,renovations,or repairs,of the building thermal envelope of existing buildings in which the new construction is less than 85 percent of the building thermal envelope. During testing: 1.Exterior windows and doors,fireplace and stove doors shall be closed,but not sealed,beyond the intended weatherstripping or other infiltration control measures. 2.Dampers including exhaust,intake,makeup air,backdraft and flue dampers shall be closed,but not sealed beyond intended infiltration control measures. 3.Interior doors,if installed at the time of the test,shall be open. 4.Exterior doors for continuous ventilation systems and heat recovery ventilators shall be closed and sealed. 5.Heating and cooling systems,if installed at the time of the test,shall be turned off. 6.Supply and return registers,if installed at the time of the test,shall be fully open. ❑ R402.4.2 Fireplaces. New wood-burning fireplaces shall have tight-fitting flue dampers or doors,and outdoor combustion air.Where using tight-fitting doors on factory-built fireplaces listed and labeled in accordance with UL 127,the doors shall be tested and listed for the fireplace.Where using tight-fitting doors on masonry fireplaces,the doors shall be listed and labeled in accordance with UL 907. ❑ R402.4.3 Fenestration air leakage. Windows,skylights and sliding glass doors shall have an air infiltration rate of no more than 0.3 cfm per square foot(1.5 Us/m2),and swinging doors no more than 0.5 cfm per square foot(2.6 Us/m2),when tested according to NFRC 400 or AAMA/WDMA/CSA 101/I.S.2/A440 by an accredited,independent laboratory and listed and labeled by the manufacturer. Exception: Site-built windows,skylights and doors. 2/12/2021 9:03 AM EnergyGauge®USA 7.0.00-FlaRes2020 FBC 7th Edition(2020) Compliant Software Page 1 of 5 MANDATORY REQUIREMENTS - (Continued) ❑ R402.4.4 Rooms containing fuel-burning appliances. In Climate Zones 3 through 8,where open combustion air ducts provide combustion air to open combustion fuel burning appliances,the appliances and combustion air opening shall be located outside the building thermal envelope or enclosed in a room,isolated from inside the thermal envelope.Such rooms shall be sealed and insulated in accordance with the envelope requirements of Table R402.1.2,where the walls,floors and ceilings shall meet not less than the basement wall R-value requirement.The door into the room shall be fully gasketed and any water lines and ducts in the room insulated in accordance with Section R403.The combustion air duct shall be insulated where it passes through conditioned space to a minimum of R-8. Exceptions: 1. Direct vent appliances with both intake and exhaust pipes installed continuous to the outside. 2. Fireplaces and stoves complying with Section R402.4.2 and Section R1006 of the Florida Building Code, Residential. ❑R402.4.5 Recessed lighting. Recessed luminaires installed in the building thermal envelope shall be sealed to limit air leakage between conditioned and unconditioned spaces.All recessed luminaires shall be IC-rated and labeled as having an air leakage rate not more than 2.0 cfm(0.944 L/s)when tested in accordance with ASTM E283 at a 1.57 psf(75 Pa)pressure differential.All recessed luminaires shall be sealed with a gasket or caulk between the housing and the interior wall or ceiling covering. SECTION R403 SYSTEMS R403.1 Controls. R403.1.1 Thermostat provision(Mandatory). At least one thermostat shall be provided for each separate heating and cooling system. ❑ R403.1.3 Heat pump supplementary heat(Mandatory). Heat pumps having supplementary electric-resistance heat shall have controls that,except during defrost,prevent supplemental heat operation when the heat pump compressor can meet the heating load. ❑ R403.3.2 Sealing(Mandatory) All ducts,air handlers,filter boxes and building cavities that form the primary air containment passageways for air distribution systems shall be considered ducts or plenum chambers,shall be constructed and sealed in accordance with Section C403.2.9.2 of the Commercial Provisions of this code and shall be shown to meet duct tightness criteria below. Duct tightness shall be verified by testing in accordance with ANSI/RESNET/ICC 380 by either individuals as defined in Section 553.993(5)or (7),Florida Statutes,or individuals licensed as set forth in Section 489.105(3)(0,(g)or(i), Florida Statutes,to be"substantially leak free"in accordance with Section R403.3.3. R403.3.2.1 Sealed air handler. Air handlers shall have a manufacturer's designation for an air leakage of no more than 2 percent of the design airflow rate when tested in accordance with ASHRAE 193. ❑ R403.3.3 Duct testing(Mandatory).Ducts shall be pressure tested to determine air leakage by one of the following methods: 1. Rough-in test:Total leakage shall be measured with a pressure differential of 0.1 inch w.g.(25 Pa)across the system, including the manufacturer's air handler enclosure if installed at the time of the test.All registers shall be,taped or otherwise sealed during the test. 2. Postconstruction test:Total leakage shall be measured with a pressure differential of 0.1 inch w.g.(25 Pa)across the entire system,including the manufacturer's air handler enclosure.Registers shall be taped or otherwise sealed during the test. Exceptions: 1. A duct air leakage test shall not be required where the ducts and air handlers are located entirely within the building thermal envelope. 2. Duct testing is not mandatory for buildings complying by Section 405 of this code. Duct leakage testing is required for Section R405 compliance where credit is taken for leakage,and a duct air leakage Qn to the outside of less than 0.080(where Qn= duct leakage to the outside in cfm per 100 square feet of conditioned floor area tested at 25 Pascals)is indicated in the compliance report for the proposed design. A written report of the results of the test shall be signed by the party conducting the test and provided to the code official. R403.3.5 Building cavities(Mandatory). Building framing cavities shall not be used as ducts or plenums. R403.4 Mechanical system piping insulation(Mandatory). Mechanical system piping capable of carrying fluids above 105°F(41°C) or below 55°F(13°C)shall be insulated to a minimum of R-3. ❑ R403.4.1 Protection of piping insulation. Piping insulation exposed to weather shall be protected from damage, including that caused by sunlight,moisture,equipment maintenance and wind,and shall provide shielding from solar radiation that can cause degradation of the material.Adhesive tape shall not be permitted. R403.5.1 Heated water circulation and temperature maintenance systems(Mandatory). If heated water circulation systems are installed,they shall be in accordance with Section R403.5.1.1.Heat trace temperature maintenance systems shall be in accordance with Section R403.5.1.2.Automatic controls,temperature sensors and pumps shall be accessible.Manual controls shall be readily accessible. R403.5.1.1 Circulation systems. Heated water circulation systems shall be provided with a circulation pump.The system return pipe shall ❑ be a dedicated return pipe or a cold water supply pipe.Gravity and thermosiphon circulation systems shall be prohibited.Controls for circulating hot water system pumps shall start the pump based on the identification of a demand for hot water within the occupancy.The controls shall automatically turn off the pump when the water in the circulation loop is at the desired temperature and when there is no demand for hot water. ❑ R403.5.1.2 Heat trace systems.Electric heat trace systems shall comply with IEEE 515.1 or UL 515.Controls for such systems shall automatically adjust the energy input to the heat tracing to maintain the desired water temperature in the piping in accordance with the times when heated water is used in the occupancy. 2/12/2021 9:03 AM EnergyGauge®USA 7.0.00-FlaRes202O FBC 7th Edition(2020) Compliant Software Page 2 of 5 MANDATORY REQUIREMENTS - (Continued)- ❑ R403.5.5 Heat traps(Mandatory). Storage water heaters not equipped with integral heat traps and having vertical pipe risers shall have heat traps installed on both the inlets and outlets.External heat traps shall consist of either a commercially available heat trap or a downward and upward bend of at least 3'/2 inches(89 mm)in the hot water distribution line and cold water line located as close as possible to the storage tank. R403.5.6 Water heater efficiencies(Mandatory). ❑ R403.5.6.1.1 Automatic controls. Service water-heating systems shall be equipped with automatic temperature controls capable of adjustment from the lowest to the highest acceptable temperature settings for the intended use.The minimum temperature setting range shall be from 100OF to 140°F(38°C to 60°C). ❑ R403.5.6.1.2 Shut down. A separate switch or a clearly marked circuit breaker shall be provided to permit the power supplied to electric service systems to be turned off.A separate valve shall be provided to permit the energy supplied to the main burner(s)of combustion types of service water-heating systems to be turned off. ❑ R403.5.6.2 Water-heating equipment. Water-heating equipment installed in residential units shall meet the minimum efficiencies of Table C404.2 in Chapter 4 of the Florida Building Code, Energy Conservation,Commercial Provisions,for the type of equipment installed. Equipment used to provide heating functions as part of a combination system shall satisfy all stated requirements for the appropriate water-heating category.Solar water heaters shall meet the criteria of Section R403.5.6.2.1. ❑ R403.5.6.2.1 Solar water-heating systems. Solar systems for domestic hot water production are rated by the annual solar energy factor of the system.The solar energy factor of a system shall be determined from the Florida Solar Energy Center Directory of Certified Solar Systems.Solar collectors shall be tested in accordance with ISO Standard 9806,Test Methods for Solar Collectors, and SRCC Standard TM-1,Solar Domestic Hot Water System and Component Test Protocol.Collectors in installed solar water-heating systems should meet the following criteria: 1. Be installed with a tilt angle between 10 degrees and 40 degrees of the horizontal;and 2. Be installed at an orientation within 45 degrees of true south. ❑ R403.6 Mechanical ventilation(Mandatory). The building shall be provided with ventilation that meets the requirements of the Florida Building Code,Residential,or Florida Building Code,Mechanical,as applicable,or with other approved means of ventilation including:Natural,Infiltration or Mechanical means.Outdoor air intakes and exhausts shall have automatic or gravity dampers that close when the ventilation system is not operating. ❑ R403.6.1 Whole-house mechanical ventilation system fan efficacy.When installed to function as a whole-house mechanical ventilation system,fans shall meet the efficacy requirements of Table R403.6.1. Exception: Where an air handler that is integral to tested and listed HVAC equipment is used to provide whole-house mechanical ventilation,the air handler shall be powered by an electronically commutated motor. ❑ R403.6.2 Ventilation air. Residential buildings designed to be operated at a positive indoor pressure or for mechanical ventilation shall meet the following criteria: 1. The design air change per hour minimums for residential buildings in ASHRAE 62.2,Ventilation for Acceptable Indoor Air Quality,shall be the maximum rates allowed for residential applications. 2. No ventilation or air-conditioning system make-up air shall be provided to conditioned space from attics, crawlspaces,attached enclosed garages or outdoor spaces adjacent to swimming pools or spas. 3. If ventilation air is drawn from enclosed space(s),then the walls of the space(s)from which air is drawn shall be insulated to a minimum of R-11 and the ceiling shall be insulated to a minimum of R-19,space permitting,or R-10 otherwise. R403.7 Heating and cooling equipment. R403.7.1 Equipment sizing(Mandatory). Heating and cooling equipment shall be sized in accordance with ACCA Manual S based ❑ on the equipment loads calculated in accordance with ACCA Manual J or other approved heating and cooling calculation methodologies,based on building loads for the directional orientation of the building.The manufacturer and model number of the outdoor and indoor units(if split system)shall be submitted along with the sensible and total cooling capacities at the design conditions described in Section R302.1.This Code does not allow designer safety factors, provisions for future expansion or other factors that affect equipment sizing.System sizing calculations shall not include loads created by local intermittent mechanical ventilation such as standard kitchen and bathroom exhaust systems.New or replacement heating and cooling equipment shall have an efficiency rating equal to or greater than the minimum required by federal law for the geographic location where the equipment is installed. TABLE R403.6.1 WHOLE-HOUSE MECHANICAL VENTILATION SYSTEM FAN EFFICACY FAN LOCATION AIRFLOW RATE MINIMUM MINIMUM EFFICACY a AIRFLOW RATE MAXIMUIV (CFM) (CFM/WATT) (CFM) HRV or ERV Any 1.2 cfm/watt Any Range hoods Any 2.8 cfm/watt Any In-line fan Any 2.8 cfm/watt Any Bathroom,utility room 10 1.4 cfm/watt <90 _ Bathroom,utility room 90 2.8 cfm/watt Any For SI: 1 cfm=28.3 L/min. a. When tested in accordance with HVI Standard 916 2/12/2021 9:03 AM EnergyGauge®USA 7.0.00-FlaRes202O FBC 7th Edition(2020) Compliant Software Page 3 of 5 MANDATORY REQUIREMENTS - (Continued)' ❑ R403.7.1.1 Cooling equipment capacity. Cooling only equipment shall be selected so that its total capacity is not less than the calculated total load but not more than 1.15 times greater than the total load calculated according to the procedure selected in Section R403.7,or the closest available size provided by the manufacturer's product lines.The corresponding latent capacity of the equipment shall not be less than the calculated latent load. The published value for AHRI total capacity is a nominal,rating-test value and shall not be used for equipment sizing. Manufacturer's expanded performance data shall be used to select cooling-only equipment.This selection shall be based on the outdoor design dry-bulb temperature for the load calculation(or entering water temperature for water-source equipment),the blower CFM provided by the expanded performance data,the design value for entering wet-bulb temperature and the design value for entering dry-bulb temperature. Design values for entering wet-bulb and dry-bulb temperatures shall be for the indoor dry bulb and relative humidity used for the load calculation and shall be adjusted for return side gains if the return duct(s)is installed in an unconditioned space. Exceptions: 1. Attached single-and multiple-family residential equipment sizing may be selected so that its cooling capacity is less than the calculated total sensible load but not less than 80 percent of that load. 2. When signed and sealed by a Florida-registered engineer,in attached single-and multiple-family units,the capacity of equipment may be sized in accordance with good design practice. R403.7.1.2 Heating equipment capacity. ❑ R403.7.1.2.1 Heat pumps. Heat pump sizing shall be based on the cooling requirements as calculated according to Section R403.7.1.1,and the heat pump total cooling capacity shall not be more than 1.15 times greater than the design cooling load even if the design heating load is 1.15 times greater than the design cooling load. R403.7.1.2.2 Electric resistance furnaces. Electric resistance furnaces shall be sized within 4 kW of the design requirements calculated according to the procedure selected in Section R403.7.1. ❑ R403.7.1.2.3 Fossil fuel heating equipment. The capacity of fossil fuel heating equipment with natural draft atmospheric burners shall not be less than the design load calculated in accordance with Section R403.7.1. ❑ R403.7.1.3 Extra capacity required for special occasions. Residences requiring excess cooling or heating equipment capacity on an intermittent basis,such as anticipated additional loads caused by major entertainment events,shall have equipment sized or controlled to prevent continuous space cooling or heating within that space by one or more of the following options: 1. A separate cooling or heating system is utilized to provide cooling or heating to the major entertainment areas. 2. A variable capacity system sized for optimum performance during base load periods is utilized. R403.8 Systems serving multiple dwelling units(Mandatory). Systems serving multiple dwelling units shall comply with Sections ❑ C403 and C404 of the Florida Building Code,Energy Conservation—Commercial Provisions in lieu of Section R403. ❑ R403.9 Snow melt and ice system controls(Mandatory) Snow-and ice-melting systems, supplied through energy service to the building, shall include automatic controls capable of shutting off the system when the pavement temperature is above 50°F(10°C),and no precipitation is falling and an automatic or manual control that will allow shutoff when the outdoor temperature is above 40oF(4.8°C). ❑ R403.10 Pools and permanent spa energy consumption(Mandatory). The energy consumption of pools and permanent spas shall be in accordance with Sections R403.10.1 through R403.10.5. R403.10.1 Heaters. The electric power to heaters shall be controlled by a readily accessible on-off switch that is an integral part of the heater mounted on the exterior of the heater,or external to and within 3 feet(914 mm)of the heater.Operation of such switch shall not change the setting of the heater thermostat.Such switches shall be in addition to a circuit breaker for the power to the heater.Gas-fired heaters shall not be equipped with continuously burning ignition pilots. ❑ R403.10.2 Time switches.Time switches or other control methods that can automatically turn off and on according to a preset schedule shall be installed for heaters and pump motors.Heaters and pump motors that have built-in time switches shall be in compliance with this section. Exceptions: 1. Where public health standards require 24-hour pump operation. 2. Pumps that operate solar-and waste-heat-recovery pool heating systems. 3. Where pumps are powered exclusively from on-site renewable generation. 2/12/2021 9:03 AM EnergyGauge®USA 7.0.00-FlaRes202O FBC 7th Edition(2020) Compliant Software Page 4 of 5 ,f ❑ R403.10.3 Covers. Outdoor heated swimming pools and outdoor permarient spas shall be equipped with a vapor-retardant cover on or at the water surface or a liquid cover or other means proven to reduce heat loss. Exception: Where more than 70 percent of the energy for heating,computed over an operation season,is from site-recovered energy,such as from a heat pump or solar energy source,covers or other vapor-retardant means shall not be required. R403.10.4 Gas-and oil-fired pool and spa heaters. All gas-and oil-fired pool and spa heaters shall have a minimum thermal ❑ efficiency of 82 percent for heaters manufactured on or after April 16,2013,when tested in accordance with ANSI Z 21.56. Pool heaters fired by natural or LP gas shall not have continuously burning pilot lights. R403.10.5 Heat pump pool heaters. Heat pump pool heaters shall have a minimum COP of 4.0 when tested in accordance with AHRI 1160,Table 2,Standard Rating Conditions-Low Air Temperature.A test report from an independent laboratory is required to verify procedure compliance. Geothermal swimming pool heat pumps are not required to meet this standard. ❑ R403.11 Portable spas(Mandatory).The energy consumption of electric-powered portable spas shall be controlled by the requirements of APSP-14. R403.13 Dehumidifiers(Mandatory If installed, a dehumidifier shall conform to the following requirements: 1. The minimum rated efficiency of the dehumidifier shall be greater than 1.7 liters/kWh if the total dehumidifier capacity for the house is less than 75 pints/day and greater than 2.38 liters/kWh if the total dehumidifier capacity for the house is greater than or equal to 75 pints/day. 2. The dehumidifier shall be controlled by a sensor that is installed in a location where it is exposed to mixed house air. 3. Any dehumidifier unit located in unconditioned space that treats air from conditioned space shall be insulated to a minimum of R-2. 4. Condensate disposal shall be in accordance with Section M1411.3.1 of the Florida Building Code,Residential. ❑ R403.13.1 Ducted dehumidifiers. Ducted dehumidifiers shall, in addition to conforming to the requirements of Section R403.13, conform to the following requirements: 1. If a ducted dehumidifier is configured with return and supply ducts both connected into the supply side of the cooling system,a backdraft damper shall be installed in the supply air duct between the dehumidifier inlet and outlet duct. 2. If a ducted dehumidifier is configured with only its supply duct connected into the supply side of the central heating and cooling system, a'backdraft damper shall be installed in the dehumidifier supply duct between the dehumidifier and central supply duct. 3. A ducted dehumidifier shall not be ducted to or from a central ducted cooling system on the return duct side upstream from the central cooling evaporator coil. 4. Ductwork associated with a dehumidifier located in unconditioned space shall be insulated to a minimum of R-6. SECTION R404 ELECTRICAL POWER AND LIGHTING SYSTEMS R404.1 Lighting equipment(Mandatory). Not less than 90 percent of the lamps in permanently installed luminaires shall have an efficacy of at least 45 lumens-per-watt or shall utilize lamps with an efficacy of not less than 65 lumens-per-watt. R404.1.1 Lighting equipment(Mandatory). Fuel gas lighting systems shall not have continuously burning pilot lights. 2/12/2021 9:03 AM EnergyGauge®USA 7.0.00-FlaRes2020 FBC 7th Edition(2020) Compliant Software Page 5 of 5 2020 -AIR BARRIER AND INSULATION INSPECTION COMPONENT CRITERIA TABLE 402.4.1.1 AIR BARRIER AND INSULATION INSPECTION COMPONENT CRITERIA a Project Name: Barker-38039 7th Ave Builder Name: Street: 38039 7th Ave Permit Office: Zephyrhills City,State,Zip: Zephyrhills,FL,33542 Permit Number: Y Owner: Jurisdiction: 611600 W Design Location: FL,Lakeland U COMPONENT AIR BARRIER CRITERIA INSULATION INSTALLATION CRITERIA General A continuous air barrier shall be installed in the building envelope. Air-permeable insulation shall The exterior thermal envelope contains a continuous air barrier. not be used as a sealing material. requirements Breaks or joints in the air barrier shall be sealed. The air barrier in any dropped ceiling/soffit shall be aligned with The insulation in an dropped ceiling/soffit /soffit Ceiling/attic the insulation and an gaps in the air barrier shall be sealed. y pp g y g p shall be aligned with the air barrier. Access openings,drop down stairs or knee wall doors to unconditioned attic spaces shall be sealed. Walls The junction of the foundation and sill plate shall be sealed. Cavities within corners and headers of frame walls The junction of the top plate and the top of exterior walls shall be shall be insulated by completely filling the cavity sealed. with a material having a thermal resistance of R-3 Knee walls shall be sealed. per inch minimum. Exterior thermal envelope insulation for framed walls shall be installed in substantial contact and continuous alignment with the air barrier. Windows, skylights The space between window/doorjambs and framing,and and doors skylights and framing shall be sealed. Rim joists Rim joists shall include the air barrier. Rim joists shall be insulated. Floors The air barrier shall be installed at any exposed edge of Floor framing cavity insulation shall be installed to (including insulation. maintain permanent contact with the underside of above-garage subfloor decking,or floor framing cavity insulation and cantilevered shall be permitted to be in contact with the top side floors) of sheathing,or continuous insulation installed on the underside of floor framing and extends from the bottom to the top of all perimeter floor framing members. Crawl space walls Exposed earth in unvented crawl spaces shall be covered with Where provided instead of floor insulation,insulation a Class I vapor retarder with overlapping joints taped. shall be permanently attached to the crawlspace walls. Shafts,penetrations Duct shafts,utility penetrations,and flue shafts opening to exterior or unconditioned space shall be sealed. Batts in narrow cavities shall be cut to fit,or narrow Narrow cavities cavities shall be filled by insulation that on installation readily conforms to the available cavity spaces. Garage separation Air sealing shall be provided between the garage and conditioned spa s. Recessed lighting Recessed light fixtures installed in the building thermal envelope Recessed light fixtures installed in the building shall be sealed to the finished surface. thermal envelope shall be air tight and IC rated. Plumbing and wiring Batt insulation shall be cut neatly to fit around wiring and plumbing in exterior walls,or insulation that on installation readily conforms to available space shall extend Shower/tub The air barrier installed at exterior walls adjacent to showers and Exterior walls adjacent to showers and tubs shall on exterior wall tubs shall separate them from the showers and tubs. be'insulated. Electrical/phone box or The air barrier shall be installed behind electrical or communication exterior walls boxes or air-sealed boxes shall be installed. HVAC register boots HVAC supply and return register boots that penetrate building thermal envelope shall be sealed to the sub-floor,wall covering or Concealed When required to be sealed,concealed fire sprinklers shall only be sprinklers sealed in a manner that is recommended by the manufacturer. Caulking or other adhesive sealants shall not be used to fill voids between fire sprinkler cover plates and walls or ceolonas, a.In addition,inspection of log walls shall be in accordance with the provisions of[CC-400. 2/12/2021 9:03 AM EnergyGauge®USA 7.0.00-FlaRes2020 FBC 7th Edition(2020) Compliant Software Page 1 of 1 Envelope Leakage Test Report (Blower Door Test) Residential Prescriptive, Performance or ERI Method Compliance 2020 Florida Building Code, Energy Conservation, 7th Edition Jurisdiction: 611600 Permit#: Jolbanformafiion,.. Builder: Community: Lot: NA Address: 38039 7th Ave City: Zephyrhills State: FL Zip: 33542 Air.Leakage Test ResU1tS "Passing iesults must meet either the Performance, Prescriptive; or ERI Method PRESCRIPTIVE METHOD--The building or dwelling unit shall be tested and verged as having an air leakage rate of riot exceeding 7 air changes peg hour at a pressure,of 0.2 inch w.g.(50 Pascals)in Climate Zones,1 and 2. O,_"P,ERFORMANCE"";or ERt METHOD The building or,dwell_Ing unit•shall be tested and"verified as having an air leakage rate of not exceeding the selected AC_H(5D)cvalve,as shown on Form R40!-202Q(Performance)or R406-2020(ERI);section"labeled as infiltration,.sub=section'ACH50: ACH(50)specrfieo`on Form R4Q5 2a20 EnergyCafp.(Performance)ar R406 2020(Eh'f): 6.000 x 60 _ 1386 = Method for calculating building volume: CFM(50) Building Volume ACH(50) O Retrieved from architectural plans ❑ PASS •Code software calculated When ACH(50) is less than 3, Mechanical Ventilation installation O Field measured and calculated must be verified by building department. R402.4.1.2 Testing.Testing shall be conducted in accordance with ANSI/RESNET/ICC 380 and reported at a pressure of 0.2 inch w.g. (50 Pascals). Testing shall be conducted by either individuals as defined in Section 553.993(5)or(7),Florida Statues.or individuals licensed as set forth in Section 489.105(3)(0, (g),or(i)or an approved third party.A written report of the results of the test shall be signed by the party conducting the test and provided to thecode official.Testing shall be performed at any time after creation of all penetrations of the building thermal envelope. During testing: 1. Exterior windows and doors,fireplace and stove doors shall be closed,but not sealed,beyond the intended weatherstripping or other infiltration control measures. 2. Dampers including exhaust,intake,makeup air, back draft and flue dampers shall be closed,but not sealed beyond intended infiltration control measures. . 3. Interior doors,if installed at the time of the test,shall be open. 4. Exterior doors for continuous ventilation systems and heat recovery ventilators shall be closed and sealed. 5. Heating and cooling systems,if installed at the time of the test,shall be turned off. 6.Supply and return registers,if installed at the time of the test,shall be fully open. `Testitig:Corrtpany , ; .; . .. , .. • ; Company Name: Phone: I hereby verify that the above Air Leakage results are in accordance with the 2020 7th Edition Florida Building Code Energy Conservation requirements according to the compliance method selected above. Signature of Tester: Date of Test: Printed Name of Tester: License/Certification#: Issuing Authority: 2/12/2021 9:03:46 AM EnergyGaugeO USA 7.0.00-FlaRes202O FBC 7th Edition(2020)Compliant Software Page 1 of 1 Duct Leakage Test Report Residential Prescriptive, Performance or ERI Method Compliance 2020 Florida Building Code, Energy Conservation, 7th Edition Jurisdiction: 611600 Permit#: b-.lnforlrnatioln: • ,` Builder: Community: Lot: NA Address: 38039 7th Ave City: Zephyrhills State: FL Zip: 33542 ©uc#�Leakage,Test.Results : " - System 1 cfm25 Q P"rescriptive Me#hod-.cf�,2�(total}: System 2 cfm25 a'To'qualify,a5"substantially.leak free°Qu`[otal:inust`be less than or; :',;'`equal to g.04':lf air;liandler;hit is'installed::if air handler'pp jst,not.: System 3 cfm25 rnstalled;,.Qh Total.rhU's'be`Jess,than car equal:,to:i}.03,This testing..=.: meth,0 'meets the"requirements in'ac6ordanee�with Section R4Q$3:3 :. Sum of others cfm25 _;is th6''§irhandler unit ii7sfalled during-tostihO?Q YES("o) E NQ,( Total of all cfm25 (� el OrmandWERI'.Methad cfm25(Qut"ocTiital Too ualify,usihi thi.i i6thod='On must:not:bwgreater than the-,`-.',-., 198 = Qn proposed�duct leakage.Q specified on Form R46!5- 120 or,R40&2020 Total of all Total Conditioned systems Square Footage z' -eakage Type;se/ecfedorr Forrrr": „Qia specked on Fcirrii R405-2t?2f? R405=2p2a:(Enei yCalc}or t U6-2t?2(1:: ' ('Ei�ergyCalc)or.R�400,2020. . PASS FAIL Proposed Leak Free 0.03 Duct tightness shall be verified by testing in accordance with ANSI/RESNET/ICC380 by either individuals as defined in Section 553.993(5)or(7), Florida Statutes, or individuals licensed as set forth in Section 489.105(3)(f), (g)or(i), Florida Statutes. Testin Com an ; .........:....... Company Name: Phone: I hereby verify that the above duct leakage testing results are in accordance with the Florida Building Code requirements with the selected compliance path as stated above, either the Prescriptive Method or Performance Method. Signature of Tester: Date of Test: Printed Name of Tester: License/Certification#: Issuing Authority: 2/12/2021 9:04:00 AM EnergyGauge®USA 7.0.00-FlaRes202O FBC 7th Edition(2020)Compliant Software Page 1 of 1 Manual S Compliance Report Job: Barker-38039 7th Ave lr••l^ 1C Date: Feb 05,2021 l l ltt s Entire House By: E-Calcs Plus,Inc. E-Calcs Plus, Inc. 9250 Corkscrew Rd,Suite 8,Estero,FL 33928 Phone:239.810.6106 Email:eric@ecalcsplus.com Web:www.ecalesplus.com License:HERS Rater ID 0757810 'Project • • For: Barker-38039 7th Ave 38039 7th Ave,Zephyrhills, FL 33542 C001ih,g Equipment Design Conditions Outdoor design DB: 91.3°F Sensible gain: 16310 Btuh Entering coil DB: 76.3°F Outdoor design WB: 77.3°F Latent gain: 4640 Btuh Entering coil WB: 64.0°F Indoor design DB: 75.0°F Total gain: 20950 Btuh Indoor RH: 50% Estimated airflow: 800 cfm Manufacturer's Performance Data at Actual Design Conditions Equipment type: Split ASHR Manufacturer: Carrier Model: 25HBC524AP0300+FX4DNF025L Actual airflow: 800 cfm Sensible capacity: 18098 Btuh 111%of load Latent capacity: 4866 Bfuh 105%of load Total capacity: 22964 Btuh 1101/o of load SHR: 79% Heating Equipment Design Conditions Outdoor design DB: 42.5°F Heat loss: 18464 Btuh Entering coil DB: 68.2°F Indoor design DB: 70.0°F Manufacturer's Performance Data at Actual Design Conditions Equipment type: Split ASHP Manufacturer: Carrier Model: 25HBC524AP0300+FX4DNF025L Actual airflow: 800 cfm Output capacity: 22471 Btuh 122%of load Capacity balance: 36 °F Supplemental heat required: 0 Btuh Economic balance: -50 °F Backup equipment type: Elec strip Manufacturer: Carrier Model: AFUE 100 Actual airflow: 800 cfm Output capacity: 5.0 ' kW 92%of load Temp. rise: 50 °F Meets all requirements of ACCA Manual S. wrtlgt tsoft 2021-Feb-12 09:01:39 Right-Suite®Universal 2021 21.0.03 RSU27537 Page 1 39 7th Avell3arker-38039 7th Ave 2.12.2021.rup Calc=MJ8 Front Door faces:SE 'rJ Project Summary Job: Barker-38039 7th Ave E-Calcs Date: Feb 05,2021 Plus,Inc. Entire House By: E-Calcs Plus,Inc. E-Calcs Plus, Inc. 9250 Corkscrew Rd,Suite 8,Estero,FL 33928 Phone:239.810.6106 Email:eric@ecalcsplus.com Web:www.ecalcsplus.com License:HERS Rater ID 0757810 Project • • For: Barker-38039 7th Ave 38039 7th Ave,Zephyrhills, FL 33542 Notes: Desi-gn Information Weather: Tampa International AP, FL, US Winter Design Conditions Summer Design Conditions Outside db 43 °F Outside db 91 °F Inside db 70 °F Inside db 75 °F Design TD 28 °F Design TD 16 °F Daily range L Relative humidity 50 % Moisture difference 55 gr/lb Heating Summary Sensible Cooling Equipment Load Sizing Structure 14423 Btuh Structure 13371 Btuh Ducts 2812 Btuh Ducts 2210 Btuh Central vent(41 cfm) 1228 Btuh Central vent(41 cfm) 728 Btuh Outside air Outside air Humidification 0 Btuh Blower 0 Btuh Piping 0 Btuh Equipment load 18464 Btuh Use manufacturer's data y Rate/swing multiplier 1.00 Infiltration Equipment sensible load 16310 Btuh Method Simplified Latent Cooling Equipment Load Sizing Construction quality Average Fireplaces 0 Structure 1783 Btuh Ducts 1347 Btuh Central vent(41 cfm) 1510 Btuh Heating Cooling Outside air Area(ft') 1062 1062 Equipment latent load 4640 Btuh Volume(f 3) 8298 8298 Air changes/hour 0.45 0.23 Equipment Total Load (Sen+Lat) 20950 Btuh Equiv.AVF(cfm) 62 32 Req. total capacity at 0.75 SHR 1.8 ton Heating Equipment Summary Cooling Equipment Summary Make Carrier Make Carrier Trade CARRIER Trade CARRIER Model 25HBC524AP0300 Cond 25HBC524AP0300 AHRI ref 204837229 Coil FX4DNF025L AHRI ref 204837229 Efficiency 8.5 HSPF Efficiency 12.5 EER, 15 SEER Heating input Sensible cooling 18000 Btuh Heating output 24000 Btuh @ 47-F Latent cooling 6000 Btuh Temperature rise 27 °F Total cooling 24000 Btuh Actual air flow 800 cfm Actual air flow 800 cfm Air flow factor 0.046 cfm/Btuh Air flow factor_ 0.051 cfm/Btuh Static pressure 0 in H2O Static pressure 0 in H2O Space thermostat Load sensible heat ratio 0.78 Capacitybalance point=36°F Backup: Carrier AFUE 100 Input=5 kW, Output= 17061 Btuh, 100 AFUE Calculations approved by ACCA to meet all requirements of Manual J 8th Ed. -old- Vvrightscsft, 2021-Feb-12 09:01:39 ^� r «� • Rig ht-Suite@ Universal 2021 21.0.03 RSU27537 Page 1 ...39 7th AvelBarker-38039 7th Ave 2.12.2021.rup Calc=MJ8 Front Door faces:SE Load Short Form Job: Barker-38039 7th Ave E-Cake Date: Feb 05,2021 Plus,Inc. Entire House By: E-Calcs Plus,Inc. E-Calcs Plus, Inc. 9250 Corkscrew Rd,Suite 8,Estero,FL 33928 Phone:239.810.6106 Email:edc@ecalcsplus.com Web:www.ecalesplus.com License:HERS Rater ID 0757810 . Project Information For: Barker-38039 7th Ave 38039 7th Ave,Zephyrhills, FL 33542 Design Information Htg Clg Infiltration Outside db (OF) 43 91 Method Simplified Inside db(OF) 70 75 Construction quality Average Design TD (OF) 28 16 Fireplaces 0 Daily range - L Inside humidity(%) 50 50 Moisture difference(gr/lb) 23 55 HEATING EQUIPMENT COOLING EQUIPMENT Make, Carrier Make Carrier Trade CARRIER Trade CARRIER Model 25HBC524AP0300 Cond 25HBC524AP0300 AHRI ref 204837229 Coil FX4DNF025L AHRI ref 204837229 Efficiency 8.5 HSPF Efficiency 12.5 EER, 15 SEER Heating input Sensible cooling 18000 Btuh Heating output 24000 Btuh @ 47°F Latent cooling 6000 Btuh Temperature rise 27 OF Total cooling 24000 Btuh Actual air flow 800 cfm Actual air flow 800 cfm Air flow factor 0.046 cfm/Btuh Air flow factor 0.051 cfm/Btuh Static pressure 0 in H2O Static pressure 0 in H2O Space thermostat Load sensible heat ratio 0.78 Ca pacity ba lance point=36 OF Backup: Carrier AFUE 100 Input=5 kW Output= 17061 Btuh 100 AFUE ROOM NAME_ Area Htg load Clg load Htg AVF Clg AVF (ft2) (Btuh) (Btuh) (cfm) (cfm) Sun Room 198 4447 3168 206 163 BR 145 2906 2384 135 122 BR2 183 3172 2485 147 128 BA 66 767 904 36 46 KitlLivDin 470, 5944 6641 276 341 Entire House d 1062 17235 15582 800 800 Other equip loads 1228 728 Equip. @ 1.00 RSM 16310 Latent cooling 4640 TOTALS I 1062 I 18464 I 20950 I 800 I 800 Calculations approved by ACCA to meet all requirements of Manual J 8th Ed. - }- wrighibacfV 2021-Feb-12 09:01:39 Rig ht-Suite®U niversal 2021 21.0.03 RSU27537 Page l ...39 7th Ave\Barker-38039 7th Ave 2.12.2021.rup Calc=MJ8 Front Door faces:SE Building Analysis Job: Barker-38039 7th Ave _ � � Date: Feb 05,2021 Plus,Inc, Entire House By: E-Calcs Plus,Inc. E-Calcs Plus, Inc. 9250 Corkscrew Rd,Suite 8,Estero,FL 33928 Phone:239.810.6106 Email:eric@ecalcsplus.com Web:www.ecaicsplus.com License:HERS Rater ID 0757810 Project • • For: Barker-38039 7th Ave 38039 7th Ave,Zephyrhills, FL 33542 Design C• • • Location: Indoor: Heating Cooling Tampa International AP, FL, US Indoor temperature (OF) 70 75 Elevation: 10 ft Design TD (OF) 28 16 Latitude: 28'N Relative humidity(%) 50 50 Outdoor: Heating Cooling Moisture difference (gr/lb) 22.6 54.7 Dry bulb(OF) 43 91 Infiltration: Dailyrange (OF) - 14 ( L ) Method Simplified Wet bulb(OF) - 77 Construction quality Average Wind speed (mph) 15.0 7.5 Fireplaces 0 Component Btuh/ftz Btuh %of load Walls 3.5 3595 19.5 Wrtilaticn Glazing 15.7 1673 9.1 NCI Doors 10.7 623 3.4 Ducts Ceilings 1.6 1654 9.0 Floors 4.7 4997 27.1 Infiltration 1.8 1882 10.2 Ducts 2812 15.2 -Iriiltratim Piping 0 0 Dogs Humidification 0 0 Ventilation 1228 6.7 Ceilings Adjustments 0 Total 1 1 184641 100.01 Rcs were • Component Btuh/ftz Btuh %of load Walls 2.6 2694 16.5 �l\ �I�m Glazing 20.7 2204 13.5 Doors 9.2 537 3.3 Ceilings 1.6 1676 10.3 Floors 0 0 0 Gad t_•" �Irkrrd t firs Infiltration 0.5 570 3.5 rg------ I Ducts 2210 13.6 Ventilation 728 4.5 Internal gains 5690 34.9 D=s Blower 0 0 i Adjustments 0 Cz�lircts Total 16310 100.0 IrfiltrAcn Qds Latent Cooling Load =4640 Btuh Overall U-value=0.251 Btuh/ftz--°F Data entries checked. wri htt oft- 2021-Feb-12 09:01:39 •���+ a. ,_�« Right-Suite®Universal 2021 21.0.03 RSU27537 Page 1 ...39 7th Ave\Barker-38039 7th Ave 2.12.2021.rup Calc=MJ8 Front Door faces:SE First Floor BR BR2 BA Storage KitUvDir Sun Roorr ------------ Job M Barker-38039 7th Ave E-Calcs Plus, Inc. Scale: 1 : 62 Performed by E-Calcs Plus, Inc.for: Page 1 Barker-38039 7th Ave 9250 Corkscrew Rd,Suite 8 Right-Suite®Universal 2021 38039 7th Ave Estero,FL 33928 21.0.03 RSU27537 Zephyrhills,FL 33542 Phone:239.810.6106 2021-Feb-12 09:01:58 www.ecaicsplus.com eriG@ecaicsplus.com ...er-38039 7th Ave 2.12.2021.rup 38039 T SO �O �1>1 AERIAL PHOTOGRAPH SCALE:1"=30' O �O/ (NOT•TO-SCALE) 00 114-K- Kl� 9 sy� . `9�O / '�� �oo���Jo / p,C \p� Q- OA- �� Q- Q1 200/ \oo doh •� tio� to N� h 'f'T '� Gp �', Q Off` 01 & O J +\.0 'pcc� 00 QoP�P + 90000,001, .o x, J _ gm 401 -ALL ANGLES AND DISTANCES SHOWN HEREON AR BOTH RECORD AND MEASURED UNLESS OTHERWISE NOTED SHEET 1 OF 2(SKETCH OF SURVEY)-SEE SHEET 2 OF 2 FOR LEGAL DESCRIPTION,AND OTHER SURVEY RELATED DATA.SURVEY IS NOT COMPLETE WITHOUT ALL SHEETS The survey map Ex report or the copies thereof are not valld without the dlgital signature and seal of a Florida ilccnsed surveyor and mapper Date of Field Work: 07-29-2619 Drawn By: Oleg vdpyseraun. ��+ �`�- Order*: 62968 F V. �9`9! Last Revision Date:07-29-2019 �� E'6 PSM 2 Soundary Survey prepared'by: LBS111 NexGen Surveying, LLC sli - 5601 Corporate Way, Suite#103 " - ' n FLORIDAFL 57ATE TEO O `�� West Palm Beach, FL 33407 SURYN LLCs ',, z �, 561-508-6272 f ����d`, •1 • • • W LEGAL DESCRIPTION OF:38039 7TH AVENUE,ZEPHYRHILLS,FL,33542 THE WEST 1/2 OF LOTS 8,9,AND 10,BLOCK 126,A MAP OF THE TOWN OF ZEPHYRHILLS,ACCORDING TO MAP OR LEGEND PLATTHEREOF AS RECORDED IN PLAT BOOK 1,PAGE 54,OF THE PUBLIC RECORDS OF PASCO COUNTY, A/C -AIR CONDITIONER FLORIDA. WM -WATERMETER AL -ARCLENGTH (C) -CALCULATED CERTIFIED TO: (M) -MEASURED P.O.B. -POINTOF BEGINNING ANTHONY A.LAEZZA P.O.G -POINTOFCOMMENCEMENT FIRST AMERICAN TITLE INSURANCE COMPANY & -AND USAA BANK,ITS SUCCESSORS AND/OR ASSIGNS AS DEFINED IN THE CONDITIONS OF THE P.B. -PLATBOOK ••� POLICY,AS THEIR INTERESTS MAY APPEAR. PG -PAGE FIRST AMERICAN TITLE INSURANCE COMPANY U.E. -UTILITYEASEMENT D.E. -DRAINAGE EASEMENT RUE -PUBLIC UTILITY EASEMENT L.A.E. -LIMITED ACCESSE45EMENT FLOOD ZONE: L.M.E. -LAKEMAINTENANCE EASEMENT 12101CO456F O.H.E -OVERHEAD EASEMENT ZONE:X R -RADIUS EFF:09/26/2014 (R) -RECORD O.R.B. -OFFICIAL RECORDS BOOK SgXr. -SQUAREFEET SURVEY NOTES: Ac. -ACRES -DRIVEWAY CROSSES THE BOUNDARY LINE ON SOUTHERLY SIDE OF LOT AS SHOWN. DB -DEED BOOK -FENCES LIE NEAR BOUNDARY LINES AS SHOWN,OWNERSHIP NOT DETERMINED. (D) -DEED -FENCES CROSS THE BOUNDARY LINE ON NORTHERLY SIDE OF LOT AS SHOWN. (P) -PLAT EOW -EDGE OF WATER TOB -TOPOFBANK OHL -OVERHEADLINE CIO -CLEAN OUT ELEV -ELEVATION FF -FIN/SHEDFLOOR LS -LICENSED SURVEYOR LS -LICENSED BUSINESS PSM -PROFESSIONAL SURVEYOR&MAPPER %_ -FENCE # -NUMBER t -PLUS OR MINUS -ASPHALT ❑ -CONCRETE -PAVER/BRINCK ❑ -WOOD -LIGHTPOLE -WELL D4 -WATERVALVE -CENTER LINE ED -CATCH BASIN (:f -FIREHYDRANT 10, -U77LITYPOLE ® -MANHOLE -ELEVATION SOME ITEMS IN LEGEND MAYNOT APPEAR ON DRAWING. GENERAL NOTES: 1)THIS SURVEY IS BASED UPON RECORD INFORMATION BY CLIENT.NO SPECIFIC SEARCH OFTHE PUBLIC RECORD HAS BEEN MADE BYTHIS OFFICE UNLESS OTHERWISE NOTED. 2)IF THIS SURVEY HAS BEEN PREPARED FOR THE PURPOSES OF A MORTGAGE TRANSACTION,ITS SCOPE IS LIMITED TO THE DETERMINATION OF TITLE DEFICIENCIES.NO FUTURE CONSTRUCTION SHALL BE BASED UPON THIS SURVEY WITHOUT FIRST OBTAINING APPROVAL AND/OR UPDATES FROM NEXGEN SURVEYING,U.C.NEXGEN SURVEYING,LLC,ASSUMES NO RESPONSIBILITY FOR ERRORS RESULTING FROM FAILURETO ADHERETOTHIS CLAUSE.3)ANY FENCES SHOWN HEREON ARE ILLUSTRATIVE OF THEIR GENERAL POSITION ONLY.FENCE TIES SHOWN ARE TO GENERAL CENTERLINE OF FENCE THIS OFFICE WILL NOT BE RESPONSIBLE FOR DAMAGES i RESULTING SOLELY ON THEIR PHYSICAL RELATIONSHIP TOTHE MONUMENTED BOUNDARY LINES.4)GRAPHIC REPRESENTATIONS MAY HAVE BEEN EXAGGERATED TO MORE CLEARLY ILLUSTRATE MEASURED RELATIONSHIPS -DIMENSIONS SHALL HAVE PRECEDENCE OVER SCALED POSITIONS.5)UNDERGROUND IMPROVEMENTS HAVE NOT BEEN LOCATED EXCEPT AS SPECIFICALLY SHOWN.6)ELEVATIONS ARE BASED UPON NAnONAL GEODETIC VERTICAL DATUM(N.G.V.D.1929)OR NORTH AMERICAN VERTICAL DATUM(NA.V.D.1988).7)ALL BOUNDARY AND CONTROL DIMENSIONS SHOWN ARE FIELD MEASURED AND CORRESPOND TO RECORD INFORMATION UNLESS SPECIFICALLY NOTED OTHERWISE.8)CORNERS SHOWN AS"SET"ARE 5/8'IRON RODS IDENTIFIED W ITH A PLASTIC CAP MARKED LS(LICENSED SURVEYOR) • li • �J C