Loading...
The URL can be used to link to this page
Your browser does not support the video tag.
Home
My WebLink
About
7660 Emerson Hill (2)
o 1 o- i ou-uuzu City of Zephyrhills Fire Permit Application Fax-813-780-0021 Date Received Owner's Name L 0Q Owner's Address I J W Fee Simple Titleholder Name Fee Simple Titleholder Address Job Job Address Sub Division F] F7 Bio-Hazard Waste Storage - ANNUAL Comm Exhaust Kitchen Hood/Duct Controlled Burn Emergency Generator < 30 kw Emergency Generator > 30 kw Fire Protection Maintenance - ANNUAL ry Sprinkler ❑ Fire Alarm ❑ Hood Cleaning ❑ Hood Suppression ❑ Phone Contact for Permit Titleholder Phone Number Fumigation Tent Hazardous Material (Tier II or RQ Facility) ANNUAL Hood Installation LP/Natural Gas -Installation a LP/Natural Gas -ANNUAL Sale l Places of Assembly -ANNUAL emi n ter ❑ ❑ Ej Recreational Burn ❑ ❑ Sparklers 1 ❑ ❑ Sprinkler System Installations ❑ ❑ Standpipes (Sprinkler Sys) Fire Alarm Installation Torch Roofing/Tar Kettle Fire Pumps Waste Tire Storage ANNUAL Flammable Application- ANNUAL 2 S700, QrO I Valuation of Project Fuel Tanks 0 Other: Contractor ( Company r It, e 4' ^M Signature V Registered / N Fee Current Address License # ELECTRICIAN Company Signature Registered Y / N Fee Current Address License # PLUMBER Company Signature Registered Y / N Fee Current Y / N Address License # MECHANICAL Company Signature Registered Y / N Fee Current Y / N Address License # OTHER Company Signature Registered Y / N Fee Current Address License # Directions: Fill out application completely. Owner & Contractor sign back of application, notarized (Or, copy of signed contract with owner) If over $2500, a Notice of Commencement is required (Mechanical work over $5000) Supply two (2) sets of drawings with applicable documentation Allow 10-14 days for review after submittal date. Parcel # - obtained from Property Tax Notice (http //appraiser.pascogov.com) NOTICE OF DEED RESTRICTIONS: The undersigned understands that this permit may be subject to "deed" restrictions" which may be more restrictive than County regulations. The undersigned assumes responsibility for compliance with any applicable deed restrictions. UNLICENSED CONTRACTORS AND CONTRACTOR RESPONSIBILITIES: If the owner has hired a contractor or contractors to undertake work, they may be required to be licensed in accordance with state and local regulations. If the contractor is not licensed as required by law, both the owner and contractor may be cited for a misdemeanor violation under state law. If the owner or intended contractor are uncertain as to what licensing requirements may apply for the intended work, they are advised to contact the Pasco County Building Inspection Division —Licensing Section at 727-847- 8009. Furthermore, if the owner has hired a contractor or contractors, he is advised to have the contractor(s) sign portions of the "contractor Block" of this application for which they will be responsible. If you, as the owner sign as the contractor, that may be an indication that he is not properly licensed and is not entitled to permitting privileges in Pasco County. CONSTRUCTION LIEN LAW (Chapter 713, Florida Statutes, as amended): If valuation of work is $2,500.00 or more, I certify that I, the applicant, have been provided with a copy of the "Florida Construction Lien Law —Homeowner's Protection Guide" prepared by the Florida Department of Agriculture and Consumer Affairs. If the applicant is someone other than the "owner", I certify that I have obtained a copy of the above described document and promise in good faith to deliver it to the "owner" prior to commencement. CONTRACTOR'S/OWNER'S AFFIDAVIT: I certify that all the information in this application is accurate and that all work will be done in compliance with all applicable laws regulating construction, zoning and land development. Application is hereby made to obtain a permit to do work and installation as indicated. I certify that no work or installation has commenced prior to issuance of a permit and that all work will be performed to meet standards of all laws regulating construction, County and City codes, zoning regulations, and land development regulations in the jurisdiction. I also certify that I understand that the regulations of other government agencies may apply to the intended work, and that it is my responsibility to identify what actions 1 must take to be in compliance. If I am the AGENT FOR THE OWNER, I promise in good faith to inform the owner of the permitting conditions set forth in this affidavit prior to commencing construction. I understand that a separate permit may be required for electrical work, plumbing, signs, wells, pools, air conditioning, gas, or other installations not specifically included in the application. A permit issued shall be construed to be a license to proceed with the work and not as authority to violate, cancel, alter, or set aside any provisions of the technical codes, nor shall issuance of a permit prevent the Building Official from thereafter requiring a correction of errors in plans, construction or violations of any codes. Every permit issued shall become invalid unless the work authorized by such permit is commenced within six months of permit issuance, or if work authorized by the permit is suspended or abandoned for a period of six (6) months after the time the work is commenced. An extension may be requested, in writing, from the Building Official for a period not to exceed ninety (90) days and will demonstrate justifiable cause for the extension. If work ceases for ninety (90) consecutive days, the job is considered abandoned. WARNING TO OWNER: YOUR FAILURE TO RECORD A NOTICE OF COMMENCEMENT MAY RESULT IN YOUR PAYING TWICE FOR IMPROVEMENTS TO YOUR PROPERTY. IF YOU INTEND TO OBTAIN FINANCING, CONSULT FLORIDA JURAT (F.S. 117.03) OWNER OR AGENT Subscribed and sworn to (or affirmed) before me this by Who is/are personally known to me or has/have produced as identification. Public Commission No. Name of Notary typed, printed or stamped CONTRACTOR [-A N 11 O J— Subs vibe and s%korn or aff r e bef me �t2h 10 by /��/ nu a Who is/re personally known to me br has/have-produced '—� as identification. JA Notary Public Commission No. At Na a of Notary typed, printed or stamped E NETHECHAVARRIA Public - Staie o` Flori ammission , HH t 1 1m. Expires J!.n t8; 202a Assn.ugh National Notary P. POTTER � Project Name: j2ephry Commons CH _-I Standby Hours: ,24 The Symbol of Protection L -' - -_� Alarm Mins: [5 AFC-100 Installed By: Superior Fire Alarm & Comm Safety Margin: I2N Battery & Voltage Drop Designed By: SFAS C II SLC Type: ;-Class B Calculations Date: � _ _ _� NAC Source Voltage: 1 Model #: AFC-100 Max Panel Current (amps): 5 Panel ID: User assumes all responsibility to ensure the quantities and Location: �` current draw values in this worksheet are accurate prior to submittal. DescriptionFACP Standby (amps) Alarm (amps) City Pan If 1 AFC-100 Analog Addressable FACP 0.130 0.130 0.220 0.220 Panel Standby: 0.130 Panel Alarm: 0.220 1 UD-2000/ UD-1000 DACT Card 0.016 0.016 0.023 0.023 1 RA-6075R LCD Annunciator 0.020 0.020 0.025 0.025 I 0 RA-6500R(F) Flush Mount LCD Annunciator 0.020 0.050 0 LED-16(F) Flush Mount LED Annunciator 0.025 0.025 0 LED-16 LED Annunciator LED Power' 0.015 0.210 0 CA-6075 Class A Module 0.012 0.044 0 PSN-1000(E) Power Expander 0.015 0.015 0 PAD100-SLCE-127 SLC Expander 0.060 0.060 0 NOHMI-SLCE-127" SLC Expander 0.060 0.060 0 IDC-6 Initating Zone Expander 0.020 0.020 0 IDC-6 Initating Zone Expander Power' 0.030 0.270 0 RLY-5 Relay Expander 0.025 0.035 0 RLY-5 Relay Expander Power' 0.010 0.135 0 DRV-50 LED Driver Module 0.025 0.025 0 DRV-50 LED Driver Module LED Power' 0.010 0.215 l 0 FCB-1000 Fire Communications Bridge 0.025 0.025 0 FIB-1000 Fiber Interface Board 0.030 0.030 0 MC-1000 Multi -Connect Expander 0.010 0.010 SPG-1000 Serial Parallel Gateway 0.040 0.040 �t0 NCE-1000 Network Card Ethernet 0.050 0.050 NCF-1000 Network Card Fiber 0.095 0.095 "REQUIRED IF USING NOHMI PROTOCOL SLC DEVICES (Maximum current draw on P-Link limited to 1 Amp) P-LINK Standby: 0.036 PLINK Alarm: 0.048 *Only enter uant! / PUNK wer is hein used to wer devices SLC Devices AFC / ARC Series 2 PAD100-PD Analog Photo Smoke 0.000300 0,000600 0,000300 0.000600 PAD100-PHD Analog Photo Smoke/Heat 0.000300 0.000300 0 PAD100-HD Analog Fixed Temp Heat 0.000300 0.000300 PAD100-CD Analog Carbon Monoxide Detector 0.000300 0.000300 PAD100-DRTS PAD100-DUCT PAD100-DUCTR` PAD100-PSSA/PSDA PAD100-MIM PA0100-SIM PAD100-0IM PAD100-RM PAD100-OR01 PAD100-TRTI PAD100-ZM` PAD100-NAC` PAD100-SM PA0100-IM PAD 100-LED PAD100-LEDK PAD100-58` PAD100-LFSB` PAD100-RB` PAD100-IB" Duct Remote Test Switch Addressable Duct Detector Addressable Duct Detector w/Relay Addressable Pull Station Single/Dual Action Micro Input Module Single Input Module Dual Input Module Relay Module One Relay One Input Module Two Relay Two Input Module Conventional Zone Module Notifigation Appliance Circuit Speaker Module Isolator Module LED Module Addressable LED w/ Key Switch Addressable Sounder Base Addressable Low Frequency Sounder Base Addressable Relay Base Addressable Isolator Base 0.010000 0.000300 0.000500 0.000200 0.000200 0.000240 0.000240 0.000240 0.000240 0.000240 0.000240 0.000200 0.000240 0.000150 0.000240 0.000200 0.000200 0.000200 0.000200 0.000150 0.001200 0.000800 0.000400 0.000960 0.015000 0.000300 0.000500 0.000200 0.000200 0.000240 0.000240 0.000240 0.000240 0.000240 0.000240 0.000200 0.000240 0.000150 0.000240 0.000200 0.000200 0.000200 0.000200 0.000150 0.001200 0.000800 0.000400 0.000960 4 4 2 4 PFC-6000 Series PSA PSHA RHA FHA DDA APS-SA/APS-DA MCM SCM-4 DCM-4 TRM-4 CIZM-4 ` MOM-4 ` ARB ` ASSB ` srlc Signal (Q2017 Analog Photo Smoke Analog Photo Smoke/Heat Analog Rate of Rise Heat Analog Fixed Temp Heat Addressable Duct Detector Addressable Pull Station Single/Dual Action Mini Contact Input Module Single Contact Input Module Dual Contact Input Module Twin Relay Output Module Conventional Zone Input Mod Monitored Output Module Detector Base w/Relay Detector Base w/Sounder Short Circuit Isolator (Class A) 0.000325 0.000325 0,000325 0.000325 0.000325 0.000325 0.000325 0.000325 0.000325 0.000325 0.000325 0.000325 0.000325 0.000325 0.000?2 4 0.000325 0.000325 0.000325 0.000325 0.000325 0.000325 0.000325 0.001000 0.001000 0.001000 0.001000 0.001000 0.000325 0.000325 0.002340 0 0 100 0 0 0 0 0 0 0 0 0 0 0 AFC-100 Battery and Voltage Drop Calculation 0 ' AIB ** II I Detector Base w/Isolator (Class A) 0.000325 0 IM/IB/SCl/AIB Class B ** Current Draw from Install Manual SLC Loop Alarm LED Current 0.000000 • Requires Aux Power (Configure Below) SLC Standby: *" See the installation manual for special considerations when installing AIB, SCI devices on Class B loops. 0.002340 7 0.000000 0.036000 0.036000 0.003960 SLC Alarm: 0.039960 Potter Electric Signal (CI2017 2 04 AFC-100 Battery and Voltage Drop Calculation DescriptionNAC Circuits (See NAC Configuration below) Ckt Use Standby (amps) Alarm Total (amps) 1 Notification NAC 1 0.00000 1.05000 2 Notification NAC 2 0.00000 0.36300 NAC Standby: O.OD000 NACAlarm: 1.41300 Circuits (See 1/0 Configuration below) Ckt use Description Standby (amps) Alarm (amps) 1 Unused Total1/0 Total 0,00000 0.00000 2 Unused _ 0.00000 0.00000 _ 1/0 Standby: 0.00000 1/0 Alarm: 0.00000 Battery Calculation Summary Standby (amps) Alarm Panel Current: 0.13000 (amps) 0.22000 P-Link Current: 0.03600 0.04800 SLC Device Current: 0.00396 0.03996 NAC Circuit Current: 0.00000 1.41300 1/0 Circuit Current: 0.00000 0.00000 SLC Loop Type: Class B Total Standby: - Total Alarm: Device Addresses Used Standby Hours: 24 Alarm Mins: 5 Device Addresses Available: 100 AH Required: 4.08 AH Required: 0.15 Total Combined Standby & Alarm AmpHours Required: 4.23 Safety Margin: 20% Required Battery AmpHours: 5.08 Battery AmpHours Provided: Note: The cabinet will house two 8 AM or 18 AN batteries. The charging circuit /s rated for up to two 55 AH batteries. Potter Electric Signal (Q2017 3 of 4 AFC-100 Battery and Voltage Drop Calculation nT POTTER II NAC Circuit Configuration & Voltage Drop zephry commons Usage: Lotification Description: NAC1 #14 So i 3.19 200 1.276 1.050 19.06 16 Usage: FNotification Description: NAC2 #14 Solid 3.19 200 1.276 0.363 1 19.94 r 16 •3 User De ine=2�WL User Defined ___O.0000000.000000 0.121000 0.363000 0 0.000000 0.000000 0.176000 0.000000 0 User Defined 7 SWL 0.000000. 0.000000. 0. I07000 0,000000. User can add devices on the fly to these bottom 5 rows - (No lookup function) I 1 I -- Total Standby: J111111111111§j Total Alarm: POTTER ER 1/0 Circuit Configuration & Voltage Drop zephry commons Usage: Unused Description: #14 Solid3.19200•1.276 0.000 • 20.40 16 �' 1/0 Z MAX Circuit Current (amps): 1 Source Voltage Used (VDC): 00.4 W"T"* � .�Mt A'tMma Wnt *d VOft• MM 11bgd #12 So id r r rrr r rrr r •r -- - -t --_- --- -- --- -1 User cari add devices on the fly +o these bottom 5 rows - Potter Electric Signal (C)2017 4 of 4 AFC-100 Battery and Voltage Drop Calculation .(E)POTTER ® The Symbol of Protection Features • 100 addresses available on this analog addressable system • Additional system capacity achieved via multi -point SIX modules • 99 software zones • NFPA 72 Compliant Smoke Sensitivity Test Built -In • System Operates as Class A or Class B for SLC, P-Link and NACs • 5 Amp Power Supply, Expandable to 310 amps • 2 NAGS, Regulated, Rated at 3 Amps each, expandable to 188 • 2 Input/Output (1/0) Circuits for system flexibility rated at 1 Amp each • Strobe Synchronization and System Wide Sync for Gentexk, AMSECOS, Cooper Wheelock and System SensorR strobes • Dedicated Alarm, Supervisory and "trouble Relays • 4,000 Event History Butler • Optional two line DACT with UD-2000 that can report General, Zone or Point Information • Built in IP Communicator AFC-100 Fire Alarm Control Panel Q�SEMB�EO P •/2Jy • Ethernet Port for Programming and Network Connectivity O • E-Mail System Status, Reports and Event Information NYC Fire Dept. • Product includes 5 year warranty FM Certificate of Approval 2 U� 6256 LISTED APPROVED 7165-0328:0509 S735 Description The AFC-100 is an analog/addressable fire alarm system with a total system capacity of 100 addresses. Additional capacit-% on the system is achieved using multi -point SLC modules. The control panel utilizes the exclusive Potter protocol that includes a complete line of sensors and modules. Each SLC may be comprised of any combination of smoke sensor, heat detectors or modules and allows for a total of 50 ohms of impedance and may use any wire compliant with the National Electrical Code (NEC). The AFC-100 has a 5 Amp power supply with two Notification Appliance Circuits (NACs) and two Input/output (1/0) circuits. The NACs are rated at 3 Amps each and the I/Os are rated at 1 Amp each. Each output is regulated and power limited. In addition, each output is uniquely programmable and may be configured for steady signal, strobe synchronization, constant power, door holder power, or releasing. The strobe synchronization includes Gentcx. AMSECO, System Sensor and Cooper/Wheelock and with the exclusive Quadrasyne each output may have a unique brand and all strobes w ill flash together. The NACs may be expanded using the PSN-1000 series intelligent power supplies. Each PSN-1000 adds another 10 Amps of power, 2 additional input circuits and the AFC-100 will support up to 31 power supplies. The system will synchronize the strobes system wide. In addition the PSN- 1000E has space to allow the installation of up to six loop expansion cards. The cards mount on a stacker bracket that allows access to all SLC circuit connections. Technical Specifications Dimensions 16"W x 17H x 3'/8"D AC Mains 3.0 Amps it 120 VAC 50/60 HZ 2.0 Amps r 240 VAC 50/60 HZ Enclosure 16 gauge cold rolled steel with removable locked door with Lexan viewing window Standby Current-130 mA Alarm Current-200 mA • 5 Amps power for NACs, I/O, and P-Link Battery 3 Amps per NAC, regulated • 1 Amp per I/O circuit, regulated • Battery Charger range 8-55 Ah • Battery Charger voltage 27.3 VDC • P-Link maximum current of 1 Amp Temperature and 320 to 1201 (0°C to 49'C) with a maximum Humidity Range humidity of 93% non -condensing. Potter Electric Signal Company, LLC St. Louis, MO Phone: 800-325-3936 www.pottersignal.com __.711:111,11 _ .................... 8830134 - REV E • 919 PAGE I OF 4 P POTTER AFC-100 ® The Symbol of Protection Fire Alarm Control Panel SLC Loop Accessories The control panel may be connected with tip to 100 addressable devices or modules in any combination. The SLC is not restricted by any special wire requirements and may be wired with any N ire that complies with the NEC. SLC Loop Devices Device Description PAD100-PD Analog Photo Electric Smoke Detector is a smoke detector with a listed obscuration of 1.02 to 3.83 percent per foot. PAD100-PHD Combination Analog Photo Electric Smoke/Beat Detector — a smoke detector with a listed obscuration of 1.02 to 3.83 percent obscuration and a fixed temperature 135' Fahrenheit heat detector. PADI00-HD Analog Fixed (135d-185dF) or Rate -of -Rise Heat Detector (software selectable) PAD100-DUCTR Addressable Duct Smoke Detector with Form C Relay. Addressable Duct Smoke Detector with Form C relay rated at 10a Ca 250/120VAC or 8amps at 30VDC. PADI00-DUCT Addressable Duct Smoke Detector. PAD 100-6B 6" round base that is mounted to an electrical box and wired for connection of one of the above sensors. PAD 100-4B 4" round base that may be mounted to an electrical box and wired for connection to the above sensors. PADI00-I13 Isolator base that interrupts a short in a SLC and prevents the short from affecting protected devices on the loop. PADI00-RB Addressable Relay Base that contains one relay controlled by the SLC. Relay is rated at rated at 2 amps at 30 VDC or 0.5A at 125VAC. PAD100-SB Addressable Sounder Base that contains an addressable sounder module that may be configured for local, group and all call. PAD100-CD Addressable CO gas detector. PAD100-DD Addressable photo electric smoke detector for use in DUCT/DUCTR enclosure. PAD100-LFSB Addressable Low Frequency Sounder Base that contains an addressable sounder module that may be configured for local, group and all call. The LFSB complies with the Low Frequency Signal Requirements (520 Hz) PAD100-SPKB Speaker base is a wall or ceiling mount speaker capable of25 or 70.7 VRMS and is field selectable from 1/8W to 4W. Modules Device Description PADI00-MIM Micro Input Module provides a small foot print contact module for mounting inside an enclosure. PAD100-PSSA Single Action Addressable Pull Station, PAD100-PSDA Dual Action Addressable Pull Station. PAD100-SIM Single Input Module is a standard contact module with an LED that mounts into a 4" square electrical box. PAD100-DIM Dual Input Module is a device that can monitor two distinct inputs with a single device or in a Class A mode. PAD100-TRTI Two Relay Two Input module provides two form C relays that are individually controlled by the control panel. Each relay is rated for 2 amps at 30VDC or 0.5 amps at 125VAC. Also provides two contact inputs. PAD100-NAC Notification Appliance Circuit module is an addressable remote appliance circuit controlled by the panel. PAD I00-ZM Zone Module is used to connect conventional 2-wire smoke detectors to the system. PAD100-IM Isolater Module interrupts a short on the SLC and prevents the short from affecting protected devices on the loop. PAD100-RM Relay Module that provides one form C relay controlled by the control panel. Relay is rated for 2 amps at 30VDC or 0.5 amps at 125VAC. PAD100-LED Module provides a single addressable I-ED that is controlled by the control panel. PAD100-SM Speaker Module provides switching for two audio channels. PAD100-LEDK Addressable LED and key switch that mounts in a single gang box. PAD100-DRTS DUCTR Remote Test Switch that mourns in a single gang box and optionally supervised. For use with the PAD100-DUCTR only. PAD100-0R0I One Relay One Input Module provides one form C relay and one input. The relay is rated at 2 amps at 30VDC or 0.5 amps at 125VAC. Potter Electric Signal Company, LLC St. Louis, MO Phone: 800-325-3936 www.pottersignal.com _ _ .......... 8830134 - REV E 1 9i 19 PAGE 2 OF 4 .(E)POTTER ® The Symbol of Protection SLC Features The Potter protocol is a digital protocol with a proven design for reliability and noise immunity. The system does not require special cable or conductors for connection of the Signaling Line Circuit as long as the cable is compliant with NFPA 70 and NFPA 72. The system allows for Class A or Class B installations as well as "T-Taps", with a max wiring distance of 10.000 Ft. Sensor Features The sensors through the fire alarm control panel provide a real time status as to the condition of the system. The smoke detector sensitivity, heat detector temperature level and drift compensation are all programmable options. The system also allows for a day/night mode where the panel automatically adjusts the sensitivity depending on the time of day. To assist in the reduction of false alarms, the smoke detectors also have a maintenance warning that sends a trouble signal when a detector is dirty to the point that it can no longer maintain the programmed sensitivity. User Interface The fire alarm control panel has a 2 x 16 LCD display to provide information to the system status. The keypad has navigation keys to allow manipulation of the Menu on board the panel. The panel is shipped standard with the following LEDs: • AC Power - Green • Alarm - Red • Earth Fault - Amber • Supervisory -Amber • Silenced - Amber • Trouble - Amber • Pre -Release -Amber • Release - Red The common buttons include a Silence, Reset, Acknowledge, and Drill. All of the buttons are accessible once the locked door is opened. P-Link The AFC-100 has a proprietary communication protocol that communicates through a RS-485 connection to field devices. Up to 32 devices may be connected to a single P-Link connection. The P-Link includes the communication terminals and regulated 24 VDC connection for the field devices. The field devices may be any of the following: SLCE-127 -Nohmi addressable loop expansion module for retrofit applications. Potter Electric Signal Company, AFC-100 Fire Alarm Control Panel RA-6500R(F) — 4 x 40 LCD annunciator with a key pad in a locked metal enclosure. Flush mount version available. LED-16(F) — 16 LED annunciator with common indicators in a locked metal enclosure. Flush mount version available. PSN-1000(E) — 10 amp, remote intelligent power supply with 6 NACs, 2 Inputs and a P-Link repeater. This panel is listed in conjunction with the AFC-100 as releasing circuits. CA-6075 — Class A convertor that converts the SLC, NACs and P-Link connection UD-2000—UL listed, Dual line telephone alarm communicator DRV-50 — LED driver expander, used to connect up to 50 LEDs in a graphic display FCB-1000 — Fire communication bridge, provides remote mounting of the Ethernet connection FIB-1000 — Fiber interface module, used to extend P-Link to multi - mode fiber (2 required) RLY-5 — Relay module, provides 5 form C relay contacts rated at 3.0 amps 24VDC/125AC SPG-1000 — Serial parallel gateway, allows for the connection to a serial or parallel printer The FIB-1000, FCB-1000 and the SPG-1000 may be installed in the stacker bracket or ordered with the optional rack mount enclosure. MC-1000 Multi -Connect allows up to sixty-three AFC series panels to share a single reporting technology. IDC-6 — Initiating device circuit provides 6 programmable inputs AE-2 — Two card expansion cabinet AE-8 — Eight card expansion cabinet AE-14 — Fourteen card expansion cabinet Ethernet/I.P. Connection The AFC-100 is shipped standard with an Ethernet connection. This connection is the programming port and may be connected to a building Wide Area Network ( WAN) or Local Area Network (LAN). Once connected to the Internet, the panel may be selectively programmed to e-mail alarm conditions, trouble conditions, supervisory conditions, test, Event History and detector status. An e-mail may be sent to the panel and the panel will e-mail the event history, detector status, configuration file or server status to an authorized E-mail account. In addition, reminders may be set to send an e-mail for service, testing or other conditions. In addition, the Ethernet connection is UL listed as an IP communicator. The IP communicator is listed to report to the UL listed Sur -Gard III IP receiver. The IP communicator replaces the traditional less reliable alarm communicator transmitter that utilized telephone lines. The IP communicator is an active method of connection and communication to the monitoring station. LLC St. Louis, MO Phone: 800-325-3936 www.pottersignal.com 8830134 - REV E • 9/19 PAGE 3 OF 4 -(E)POTTER ® The Symbol of Protection Dimensions • • Q n 0 0 0 WAZAW91a Ordering Information AFC-100 Fire Alarm Control Panel © 0 TOP DEPTH = 3.75 " 0 0 DOOR= 16.07" J BACKBOX = 15.77" DEPTH = 3.84" r — yl BOTTOM Model Description Stock No. AFC-100 Fire Alarm Control Panel 3992753 Replacement Board AFC-100 3992757 0 u 0 i� RIGHT SIDE DWG.193 1 Potter Electric Signal Company, LLC St. Louis, MO Phone: 800-325-3936 www.pottersignal.com _.... _._. ......... _.. 8830134 - REV E 919 PAGE 4 OF 4 • Universal full event sole & dual path cellular &/or IP commercial fire alarm reporting from any panel brand, virtually anywhere nationwide • Code -compliant, replaces 2 POTs lines per FACP saves thousands of dollars per year over the leased landlines • Supports 12V-24V control panels and FACPs that communicate using Contact ID and 4/2 (such as on legacy panels), as primary or backup • Full data Reporting to any Central Station nationwide, via choice of LTE Networks, Verizon® or AT&r. Communicate critical life and safety alarm reports on LTE (Long Term Evolution) 10+ year life, cyber-protected multi -billion dollar cellular network, for maximum life safety & liability protection. • Proven to work even where other's won't - using Signal Boost" & twin dual diversity antennas - Max. signal acquisition & null avoidance (receives signals simultaneously on both antennas) • Easiest installation, powered by panel, NO extra power supply, NO extra conduit. (Excludes Direct AC -Powered "-PS" models, with transformer option.) t • Dual Path Cellular/IP Models Save Time & Money - Uniquely including 4 programmable EOLR zone inputs; 2 Form C Relay outputs (no extra supervision modules to buy or install); plus, 2 Telephone - style jacks for easy FACP-connection. Self -supervised on 4 wires. • Preactivated to ensure communications- saves time and labor onsite • LED Status /Trouble Indicators 3 Radio Status LED Indicators (visible from outside standard model housing) - Green, Signal Strength; Amber- Busy/Activation; Red -Trouble (4 additional LEDs, not visible, for network status & troubleshooting). Power LED indicator viewable on outer metal enclosure models. • Over -the -Air Upgradable Communicator Firmware. Remote ability for critical/mandatory updates, without a truck -roll • Cost -saving models and plans for any code requirement. Dramatic savings over monthly dedicated landline charges. UL and NFPA 72 Fire Code -Compliant, the Starl-ink Series Wireless Commercial Fire Alarm Sole Path & Dual Path Communicators provide universal support for any brand 12V to 24V fire alarm control panel, reporting in Contact ID and 4/2. With broadest LTE coverage footprint, Verizon or AT&T, using proven StarLink circuitry, they are also available in locking metal models. All provide the most economical solution for easy, versatile installation. Also regional compliances, i.e., CSFM, NYCFD, LAFD and more. Easy, Universal Installation at Every Application; Panel - Powered Technology m. StarLink Fire Communications are easily connected to any panel or Fire Alarm Control Panel (FACP) standardly operating between 12V and 24V. Flexible in any application, Starl-ink Fire also comes in standard, or models in metal housings, with code -compliant supervision, and choice of power options, Panel -Powered Technology" (powered by the panel), or direct -connect 120VAC models. Signal Boost circuitry & dual diversity antennae for maximum signal acquisition & null avoidance, receiving signals simultaneously on both antennae. Flexible Performance & Reporting Options. StarLink Fire provides full data reporting, in sole and dual path, as a primary or backup, to any central station of your choice, without requiring any special equipment on premises. Ultra -affordable plans are available to meet various codes and requirements, with supervisory check -ins from 200 seconds, to 5 minutes; and/or from 1 to 6 hours. The units are very easily activated, plans and options are selected, and 24/7 account management is provided all through www.napcocomnet.com. Napco Starl-ink Universal Fire Alarm Communicators • Sole Path Cellular and Dual Path Cellular &/or IP Models • Choice of LTE Networks, Verizon or AT&T models • Choice of plans (varies by model) - check -ins from 200 seconds to 5-minutes, and from 1 hour; up to 6 hours for dual path • Patented Signal Boost' and Dual Diversity Antennae for maximum signal acquisition & null avoidance, receiving signals simultaneously on both antennae • Money -saving Tradeup incentive credit for security professionals, on new or retrofit fire systems, i.e., tradeup missing/retired POTS lines, old radios & networks or new installations • Bonus: Full High -Speed Napco Panel remote uploading/ downloading • COMPLIANCES: NFPA 72 Editions: 2019, 2016, 2013, 2010, 2007; UL 864, 10th Ed., UL1610, UL985, UL1023, NYCFD; CSFM;LAFD +in connected by � � AT&T verizon' N Code -compliant standard ar meta! m000h oo of , c of Vei w T8 i ( FF networks. Model Ordering & Specifications veriion/ AT&T Unique Onboard Other Power LTE WIN Electrical Input Network Cell IP Option" Lab.,/Cost-Saver Partings Inputs Input Ratings Outputs Output Ratings Supploption STANDARD MODELS Features (option) r y (ABS) Panel-Powered1ach Ii:" LTiA�IIE AT&T Yes No No Input*ttage/Input 1141: 9.25VDC Max input PGMt' Open Collector Outputs Max Current: 1OV— 9OmA; IN1, IN2, current 2mA IN2,IN3: 3Vwhen active, Max 25V �`• 12.25V-71mA, IN3 9.25VDC Max input PGM3 when not active. Max current iltE 1111111 r Yes No No 200rnA peak during current 1.2mA 24mA@ 25Y transmissions DAL PATH SLE-LTEAI-FIRE AT&T Yes Yes Yes 2 TelCo jacks for EZ Panel -Powered Tech'y:It OUTI,OUT2:Dry Contact, Form FACP Conned; 4 IN1: 9-25VDC Max Input Voltage:l0-25VDC: C Relay, 30V AC/DC, 500mA Programmable EOLR IN1 IN2 nputcurrent 2mA OUTt, Input Current:162mA Max PGM3: Open Collector zone inputs; 2 Form C IN3, IN4, IN2,IN3,IN4,IN5: OUT2, to 100ni standby; Outputs Max 3Vwhen active, SLE-LTEVI-FIRE Verimn Yes Yes Yes Relay outputs (avoids NS 9-25VDC Max input PGM3 Sion 300mA peak during Max 25V when active. Max currentl.2mA mod1I0 transmissions current 24mA@ 25V MODELS IN METAL f�8 PATN ENCLOSURE Panel -Powered Tech'y:" SLE LTEA CFB AT&T Yes No No Input Voltage/Input IN1: 9-25VDC Max input PGMt, Open Collector Outputs Max Current:lOV=90mA; IN1, IN2, current 2mA IN2,IN3: PGM2 3V when active, Max 25V 12-25V- 71mA IN3 9-25VDC Max input PGM3 when not active. Max current SLE-LTEV-CFB Wrimn Yes No No 200mA peak during currentl.2mA 241nd V transmissions SLE-LTEA-CFB-PS AT&T Yes No No Direct AC -Powered: Input Voltage:120VAC nominal IN1: 9-25VDC Max input PGMt, Open Collector Outputs Max Transformer Input Current:150mA IN1, IN2, current 2mA IN2,IN3: PGM21 3Vwhen active, Max 25V when (TRF12 max; maximum charging m char IN3 9.25VDC Max input PGM3 not alive. Maximum current 16VAC, 20YA SLE-LTEV-CFB-Ps Wrizon Yes No No current: mA current 1.2mA 24ndl transformer) DIAL PATH SLEATEAI-CFB AT&T Yes Yes Yes 2 TelCo jacks for EZ FACP Conned; 4 Panel-PoweredTech'y:" IN1: 9-25VDC Max OUTI,OUT2:Dry Contact, Form ProgrammableEOLR Input 0-25VDC: IN1,fN2, inputcurrent 2mA OUTt, C Relay, 30VAC/DC, 500mA zone inputs; 2 Form C t Current: nputCurrent:162mA N3, IN4, N2,IN3,IN4,IN5: OUT2, Max PGM3: Open Collector Relay outputs (avoids tot00mAstandby; INS 9-25VDC Max input PGM3 Outputs Max 3Vwhen adive, SLE•LTEVI-CFB Verizon Yes Yes Yes regt for supervision 300mA peak during current 1.2mA Max 25V when alive. Max module) transmissions current 24mA@ 25V SLE-LTEAI-CFBPS AT&T Yes Yes Yes 2 TelCo jacks for EZ FACP Connect; 4 Direct AC -Powered: Input IN1: 9 25VDC Max OUTI,OUT2:Dry Contact, Form CRelay, 30VACIDC,500mA Transformer mer Programmable EOLR zone inputs; 2 Form C Voltage: 120VAC nominal Input Current: 200mA IN1, IN2, IN3, IN4, input current 2mA IN2,IN3,IN4,IN5: OUT1, OUT2, PGM3: Open Collector Maxax3Vwhenactix Outputs 3Vwhen alive, OutputsMax (nsfornsfor 16VAC, 20VA SLEATEVI-CFBPS Verizon Yes Yes Yes Relay outputs(avoids regtforsupervision max; maximum charging current:200mA IN5 9-25VDC Max input currentl.2mAwhen PGM3 transformer ) module) I I I I current 24mA@ 25V ACCESSORIES: SLE-WIFI-MODULE Optionally connects supported dual path models to Internet via WIR, eliminating Ethernet cable connection. Requires 7AH batty. ("See details WI2191) SLE-ANTEXT75 Optional extended range omni. antenna w/ 75' cable, premium low -loss cable & full mounting hardware & ground fault isolation mounting plate SLE-ANTEXT50 As above, with 50' cable SLE-ANTEXT30 As above, with 30' cable TRF12 Optional Plug in AC Transformer, 16.5V / 20VA (use is subject to local code compliance)t F, et, Corlrrrz ^ ooi F;rc lrlold 6rochr/res y M017ersv'5Yu(fers (A747J %StarUnk Fig Ilialliv 333 Bayview Ave., Amityville, NY 11701 - 1-800-645-9445 • www.napcosecurity.com FireLink' Integrated Fire Alarm Control itarLink Fire LTE Built In FL-32FACP-LTEV Rrewolf 8 Zone 24V Conventionial Commercial Fire Alarm Control Panel with onboard Start -ink Fire* Sole Path, Verizon LTE Cellular Alarm Communicator and integral menu -driven; LCD annunciator, w/ 4amp, 24V power supply. Optionally expandable up to 32 points/zones via commercial addressable, wireless or conventional fire devices (2 onboard'NACs roviding up to 4A notification power). Locking, metal red enclosure,(surface'or flush mount') removable 16"x17" door w/14.25"xl6" base. Houses 16Ah battery backup. Note: Always consult technical manual and/or AHJ forcomphame regmrentents for your area/cipplhca non- Suit ink, SlarI ink Fire, Fifetink, Sign a I Boost Panel -Powered Technology, Gemini & Gemim Commercial are trademarks of Napm. AT&T, Venzon, tTE, etc. are Irademarks of their respective companies. 'Startmk offers full data coverage r LS bcm w, ualh all part crud; rncd ny in Centact 10 cr art, f� for Panel -Powered techncl,gy regulated auxiliary power outputs are rego,red on listed FACP. "Add 40rf to input current & Standby Battery requirementtwhere permitted byAHJ, requires conduit.. For full detdils on the Star -in, traoeup incewve see online under http:flmsw.napmseauily.om/slarllnk/siarhnk4gupgrade/'Prom, subjen to change w/o prior nmice. LTE lifespan claims are based on those of carriers. ©NAPCO, NAPCO Security Technologies Inc. lNASOAp NSSQ A734A 2019-8 (E)POTTER RA-6075 The Symbol of Protection LCD ANNUNCIATOR INSTALLATION V� LISTED S2930 0 7165-0328:0195 Description The RA-6075 is a LCD remote annunciator for the PFC-6075 and PFC-6030 addressable fire control panel. The RA-6075 communicates using a RS-485 connection to the main panel providing common indication of Alarms, Supervisory, Trouble and other system status and control functions. The RA-6075 features a 32 character, 16x2 LCD display with LED's for Power, Alarm, Supervisory, Trouble, and Silenced conditions. It can be mounted on a single gang electrical box or a four square electrical box. The annunciator is enclosed in a sheet metal enclosure and has a Potter lock securing the keypad. Figure l: RA-6075 Class B Wiring Example To Vlf! llfi%I 51mw Ili; ato, Features Standby Current 20 mA Alarm Current 25 mA Operating Temperature 0°C-49°C (32°F-120°F) 10%-93% L 30°C (86°F) non -condensing humidity Maximum Wire Length 6500 FT Maximum Annunciators 31 Dimensions (WxHxD) 8" x 6-1/4" x 1-5/8" (Cabinet) Wire Gauge 14 AWG-22 AWG Display 2 lines x 16 characters Product includes 5 year warranty Installation The RA-6075 is connected to the PFC-6075 using a four wire RS-485 connection. The connection is power limited and supervised. Up to thirty-one (31) RA-6075 LCD annunciators can be connected using Class B or Class A wiring. Class A wiring requires an optional Class A Expander. Install in accordance with compatible fire alar!pane!1!!1 Figure 2: RA-6075 Class A Wiring Example Potter Electric Signal Company. LLC • St Louis, MO • Cust Service: 866-956-1211 - Tech Support: 866-240-1870 • Canada. 888-882-1833 • wuw.pottersignal.com PRINTED IN USA MFG. 45406077 - REV B-I PAGE I OF 2 911 (E)POTTER RA-6075 The Symbol of Protection LCD ANNUNCIATOR INSTALLATION Address Settings The RA-6075 address is set by dip s A itch S l located on the back of the RA-6075. The address must be set in the range of 1 to 31 to be recognized by the control panel. Figure 3: RA-6075 Class A (back panel viexv) Dip Switch Settings Refer to the table below for dip switch settings per Annunciator Address. Annunciator Address Dip Switch Settings SW-1 SW-2 SW-3 SW-4 SW-5 1 On Off Off Off Off 2 Off On Off Off Off 3 On On Off Off Off 4 Off Off On Off Off 5 On Off On Off Off 6 Off On On Off Off 7 On On On Off Off 8 Off Off Off On Off 9 On Off Off On Off 10 Off On Off On Off 11 On On Off On Off 12 Off Off On On Off 13 On Off On On Off 14 Oft' On On On Oft' 15 On On On On Oft' 16 Oft Oft Oft Oft' On Annunciator Address Dip Switch Settings SW-1 SW-2 SW-3 SW-4 SW-5 17 On Off Off Off On 18 Off On Off Off On 19 On On Off Off On 20 Off Off On Off On 21 On Off On Off On 22 Off On On Off On 23 On On On Off On 24 Off Off Off On On 25 On Off Off On On 26 Off On Off On On 27 On On Off On On 28 Off Off On On On 29 On Off On On On 30 Oft' On On On I On 31 On On On On On PRINTED IN USA MFG. #5406077 - REV B-I PAGE 2 OF 2 9/II P POTTER ® The Symbol of Protection Features • Terminals Marked with Polarity to assist with installation • Duplicate terminals for in and out SLC wiring • Terminals accept 22 to 12 AWG wire sizes • Installs on single gang, double gang, octagon or 4" square box • Locking tab prevents unauthorized detector removal • Product includes 5 year warranty Application The Potter PAD 100-6DB and PAD 100-4DB detector bases are used to install Potter's addressable smoke and heat detectors. The PAD 100- 6DB will mount on a single gang, double gang, octagon or 4" square electrical box. Description The PAD100-6DB and PADl00-4DB are low -profile, surface mount bases used with Potter's addressable detectors. The base uses screw - clamp terminals that accept wire ranging from 22 to 14 AWG. When installed on recessed electrical boxes the PAD 100-61313 is wide enough to completely cover the back box and the immediate surrounding area. The base is equipped with a locking tab to deter unauthorized removal of the attached detector. PAD100-4DB/6DB 4"/6"Addressable Detector Base FM 1,. UL APPROVED LISTED Technical Specifications Mounting Options Single gang, double gang, octagon, and 4" square box Terminals Screw -Clamp Type Wire Guage 22 to 12 AWG Diameter: 6.3 in (166 mm) Dimensions Height 0.72 in (18 mm) Shipping Weight 87g (3.07 oz) Material Durable Plastic Potter Electric Signal Company, LLC St. Louis, MO Phone: 800-325-3936 www.pottersignal.com PRINTED IN USA 9830107 - REV C 12'18 PAGE I OF 2 .(E)POTTER ® The Symbol of Protection Locking Feature The PAD100-6DB and PAD1004DB include a locking feature that prevents removal of the detector without using a tool. 1. To eliminate this feature, break off the locking tab (refer to Figure 1), and then install the detector. Fig. 1 2. To remove the detector from the base when the locking feature has been enabled, insert a small screw driver into the slot on the base to push the plastic tab while simultaneously turning the detector head counter -clockwise. Fig. 2 Insert small screwdr into slot to remove detector from base. PAD100-4DB/6DB 4"/6"Addressable Detector Base Wiring Diagram Fig. 3 To FA( Loop(: Ordering Information Model Description Stock No. PAD 100-6DB 6" Sensor Base 3992732 PAD1004DB 4" Sensor Base 3992731 Potter Electric _..._..._ Signal Company, LLC _ St. Louis, MO Phone: 800-325-3936 _ _..__. _.... www.pottersignal.com _...............__ PRINTED IN USA 8830107 - REV C 1218 PAGE 2 OF 2 .(E)POTTER ® The Symbol of Protection Features • One Class B contact monitoring input • Small size allows mounting in most electrical boxes • SLC Class A, Class X & Class B • 6" Pigtail wiring connections • Product includes a 5 year warranty • UUKL Listed for Smoke Control Description The PAD100-MIM is used to monitor the status of an initiating device(s) that contain a normally open set of dry contacts. The module is enclosed in a plastic case to protect against inadvertent shorts and ground faults. The case can be mounted using a single screw. The PAD100-MIM has a status indicator LED to indicate communication and alarm condition. In normal condition. the LED flashes when the device is being polled by the control panel. When the input is activated, the LED will flash at a fast rate. Application The micro input module (PAD IOO-MIM) is compatible with Potter's IPA and AFC/ARC series addressable fire alarm control panels. Generally the PAD I OO-MIM is used to monitor pull stations and other devices where the module is installed in an electrical box or enclosure behind the device being monitored. PAD100-MIM Micro Input Module 1 2 4 9 1¢ 32 44 P• sa' -� Q W N Po EfZ PAD 100-MIM (SLC Module) FM 9.3 U` APPROVED Technical Specifications Operating Voltage 24.OV Max SLC Standby 200µA Current Max SLC Alarm 200µA Current IDC Input Circuit Class B Wiring Max Wiring Resistance ] 00 S2 of IDC Max Wiring I pF Capacitance of IDC EOL Resistor 5.1 K Q Operating Temperature Range 32 to 120°F (0 to 49°C) RanOperaHumidity g 0 to 93% (non -condensing) Max no. of Module Per 127 units Loop Dimensions 1.75" (44.5mm)L x 1.36" (34.5mm)W x .43" (I I mm)D Mounting Options 2-1/2" (64mm) deep single -gang box Shipping Weight 0.3 lbs Potter Electric Signal Company, LLC St. Louis, MO Phone: 800-325-3936 www.pottersignal.com __ ._.....__....... .......... 8830079 - REV D • 12/ 18 PAGE I OF 2 .(E)POTTER PAD 100-M I M ® The Symbol of Protection Micro Input Module Setting the Address Each addressable SLC device must be assigned an address. The address is set using the DIP switch located on the front of the PAD I00-MIM. Before connecting a device to the SLC loop, take the following precautions to prevent potential damage to the panel or device: 1. Power to the device is removed. 2. Field wiring is correctly installed. 3. Field wiring has no open or short circuits. Wiring Diagram Fig 1 FROM FACP OR PREVIOUS DEVICE AND TO NEXT DEVICE Ordering Information Model I Description Stock No. PAD100-MIM I Micro Input Module 13992700 TO NORMALLY OPEN MONITORED DEVICE 5.1 K OHM REQUIRED Part #3005013 Potter Electric Signal Company, LLC St. Louis, MO Phone: 800-325-3936 www.pottersignal.com _.. ............ _.......... _ 9830079 - REV D • 12'18 PAGE 2 OF 2 PAD100-PSSA/PSDA P POTTER Addressable Pull Station ® The Symbol of Protection Single/Dual Action Features Q55EMs!�Fa • Single or Dual Action versions • Durable die-cast construction • Reset key matches the fire alarm control panels • Compatible with IPA Series panels • SLC Class A, Class X & Class B • Product includes a 5 year warranty • LTUKL Listed for Smoke Control Description The PAD100-PSSA (Single Action) is activated by simply pulling the white "T" bar handle down. The PADI00-PSDA (Dual Action) is activated by lifting the front cover and then pulling the white "T" bar handle down. Once activated, the "T" bar cannot be reset without opening the front cover. Opening the front cover will also activate the pull station. To reset the PAD100-PS Series, use the Potter WS-93 key to unlock and open the front cover. Once the cover is open, push the "T" bar back into the normal position and re -secure the front cover. Application The PAD 100-PSSA/PSDA is compatible with Potter's IPA and AFC/ ARC series addressable fire alarm control panels. It is a non -coded addressable pull station available in either a single or dual action model and installs on a single gang box or surface mounts using the P32-BB or P32-DBB (deep) back box. APPROVED 119 S Technical Specifications Operating Voltage 24.0 VDC Max SLC Standby Current 200uA Max SLC Alarm Current 200uA 32°F - 120°F (0° - 49°C) Environmental Limitations Indoor Only Dimensions 4.75" H x 3.25" W x 1.75" D Relative Humidity Range 0 - 93% (non -condensing) Single gang box or Mounting Options Potter P32-BB/DBB APS-SA - 1.22 lbs. Shipping Weight r" APS-DA - 1.46 lbs. Potter Electric Signal Company, LLC St. Louis, MO Phone: 800-325-3936 www.pottersignal.com _....... .......... _ _ .......................... 9810097 - REV D • 121/1 A PAGE I OF 2 PAD100-PSSA/PSDA POTTER Addressable Pull Station ® The Symbol of Protection Single/Dual Action Setting the Address The PAD100-PS Series uses one SLC address assigned to the device. The address is set using the DIP switch located on the back of the PAD100-PS device. Pull Station Front View Fig I -.a- 13 PAD 100-PSDA Pull Station Back View and Wiring Fig 2 FROM FACP OR PREVIOUS DEVICE TO NEXT DEVICE Ordering Information Model Description Stock No. PAD100-PSSA Addressable Pull Station, Single Action 3992721 PAD100-PSDA Addressable Pull Station, Dual Action 3992720 Potter Electric Signal Company, LLC St. Louis, MO 8830097 - REV D • 12/I8 0 �po� PAD 100-PSSA FACTORY WIRED CONTACTS 0 Phone: 800-325-3936 www.pottersignal.com PAGE 2 OF 2 (E)POTTER The Symbol of Protection PULL STiVI'ION SERIES DIE-CAST METAL MANUAL PULL STATIONS • UL and cUL Listed, FM Approved, CSFM Listed, MEA Approved, ADA Compliant • Single or Dual Action LL DOW PULL DOWN Terminal connectors j ! 10 Amp Snap Action Switch Gold plated SPST contacts • Optional auxiliary contacts • Mounts on standard single gangbox • Surface backboxes available • High -gloss red enamel finish • Glass breakrod Made in the U.S.A. Description Engineering Specifications The Potter Pull Station Series offers a complete line of'die-cast pull The contractor shall furnish and install the Potter series of pull stations for a variety of applications focusing mainly on fire alarm stations as indicated. The pull station shall be die cast construction systems. The pull stations are available in single or dual action with a "T" type pull handle that is ADA compliant. Single action pull models. All of the pull stations have a 10-amp snap action switch and stations shall be a P32-1T. Dual action pull stations shall be the Potter a dedicated terminal block for the ease of wire connections. All of P32-IT-LP. Any manual pull station installed in an outdoor or wet the metal is completely- coated to inhibit corrosion and provide for a location shall be a RMS-IT-WP weather proof unit. The contact shall uniform and quality finish. be a single pole, single throw switch rated at I amp 30V DC/125V The standard models have a hex key reset, however a kcy reset is also AC. The device shall have a terminal block for ease of wiring. Once available. The models are available with shallow and deep surface activated, the pull station shall be reset by opening the front cover. mount back boxes and as a weatherproof version. Opening of the cover in a normal state shall initiate an alarm. Operation The Potter single action series of pull stations operate by pulling the white operating handle straight do"n and the handle will lock into place. The dual action stations require the lifting of the front cover and then pulling the white operating handle straight down. The stations are reset by opening the front and placing the handle in the normal position. Ordering Information Specifications Switch Rating: 1 Amp ,a_ 30 VDC 10 Amps (a 125 VAC Pull Station Dimensions: 4-3/4" H x 3-1/4" Nk' x 7/8" D Color: Red with raised white letters, white pull bar with raised red letters For special application manual stations see bulletin 48910014. For explosion proof manual stations see bulletin #8880014. Type Model Number Stock Number Contact Type Single Action P32-IT 1000447 SPST RMS-2T 1000477 DPST RMS-61 1000478 DPDT RMS-IT-KL 1000451 SPST RMS-IT-KO 1000450 SPST, key operated, no pull Weather Proof RMS-IT-WP 1000401 SPST Dual Action P32- I T-LP 1000476 Weather Proof Dual Action RMS-IT-WP-LP 1000403 Accessories Notes Dual Action RMS-LP 1000480 Converts single action to dual action Back Box P32-BB 1000444 Surface mount back box Back Box P32-DBB 1000445 Deep surface mount back box Glass Rods RMS-GB 1000470 Replacement glass rods (10 per pkg) Potter Electric Signal Co.. LLC • St. Louis. MO • Cust Service: 866-240-1870 • Tech Support:866-956-1211 • Canada 888-882-1833 • www.pottersignal.com PRINTED IN USA MKT. 48900097 - REV L PAGE 1 OF 1 9/10 P POTTER PAD100-RM ® The Symbol of Protection Relay Module Features • One (1) Form C relay contact • SLC Class A, Class X & Class B • Mounts in a standard 4" or double gang box • Wiring terminals accessible when mounted in box • All wiring terminals accept 22 to 12 AWG • Product includes a 5 year warranty • UUKL Listed for Smoke Control Description The PAD 100-RM uses one (1) SLC loop address to provide one (1) Form C relay contact. The module mounts on either a 4" square or double gang box. The PAD 100-RM includes one red LED to indicate the module's status. In normal condition, the LED flashes when the device is being polled by the control panel. Application The PAD100-RM is compatible with Potter's IPA and AFC/ARC series addressable fire alarm control panels. The PAD 100-RM is an interface module providing one (1) Form C relay contact. Setting the Address Each addressable SLC device must be assigned an address. The address is set using the DIP switch located on the PAD IOO-RM. The PAD 100-RM uses a single device address to identify relay contacts. Before connecting a device to the SLC loop, take the following precautions to prevent potential damage to the panel or device: 1. Power to the device is removed. 2. Field wiring is correctly installed. 3. Field wiring has no open or short circuits. M � ! •,2 THE 7 13 FM �o�- m APPROVED Technical Specifications Operating Voltage 24.OV Max SLC Standby 240µA Current Max SLC Alarm 240µA Current Relay Contacts 2A @30VDC, 0.5A @125VAC Operating Temperature g 32 to 120°F (0 to 49°C) Operating Humidity Range 0 to 93% (non -condensing) Max no. of Module Per 127 units Loop Dimensions 4.17" (106mm)L x 4.17" (I06mm)W x 1.14" (29mm)D Mounting Options Standard 4" Square or Double Gang Box Shipping Weight 0.6 lbs Potter Electric Signal Company, LLC St. Louis, MO Phone: 800-325-3936 www.pottersignal.com .......---.._. 9830084 - REV D • 12/I8 PAGE 1 OF 2 -(E)POTTER ® The Symbol of Protection Installation Using Compatible Electrical Box Fig I Wiring Diagram PAD100-RMRelay Circuit Fig 2 FROM FACP OR PREVIOUS MODULE TO NEXT MODULE 1) FORM C 'CONTACTS PAD100-RM Relay Module It is possible that the internal relay in the PAD 100-RM may be shipped in the non -normal / activated state. To ensure that the internal relay is set to the normal state, connect the module to the SLC loop and reset the control panel before terminating the wiring to the modules output. Ordering Information Model Description Stock No. PAD 100-RM Relay Module 3992705 Potter Electric Signal Company, LLC St. Louis, MO _._._. Phone: 800-325-3936 • www.pottersignal.com 8830084 - REV D • 12/18 PAGE 2 OF 2 1 Standard Features: • Hybrid electronics SAD and GDT • Single point ground • 12 AWG green ground strap • Available voltage 5v,12v, 24v, 32v, 36v, 48v, 70v, 90v, and 120v • Polycarbonate plastic case AF-312 • Removable terminal connection • Each device is easily field replaceable • 3 mounting configuration • din rail • snap track • panel mount (screw) _ Ground Strap: UL listed 12 gauge stranded (65130) AWM1015 wire green jacket ground strap. 10 inches long with a crimped on #10 nng lug connector for proper ground termination. The Eclips DG series of hybrid TVSS devices are designed to provide ultra low line capacitance with superior protection. Gas Discharge Tube (GDT) and Silicone Avalanche Diodes (SAD) provide protection to sensitive electronic equipment by clamping over -voltage energy pulses and discharging them to ground. This unique design along with the hybrid electronics will protect critical system components. The first Surge Protection Device (SPD) that is truly scalable and provides real solutions. The packaging allows for mixed technology to be configured together that maintains system integrity managing ground planes and structured wiring for service and maintenance. The design features slide together modules and provides panel screw mount, snap track or Din rail mounting options. Coupled with pluggable screw terminals for easy replacement and servicing. Transient Voltage Surge Suppressors (TVSS) must have a stable ground. Eclips is the first to design a SPD that has a managed ground bus that features a single point of ground to ensure ideal conditions. This allows you to maintain system integrity, inspection and proper maintenance against electrical transients introduced to sensitive electronics. Providing protection against nuisance alarm and preventable system failure and ensure that your SPD utilizes proper ground path. How it works: In most instances the SAD does the majority of the work the SAD clamps closer the "working" voltage to provide the highest level of protection. An SPD clamping devices uses a non -linear element that conducts or short to ground when exposed to over -voltage. Such a device absorbs a large portion of the impulse energy, converting it to heat. When a transient voltage surge occurs SAD diode clamps the voltage at safe level and divert the over voltage to ground. The SAD can conduct over -voltage pulses over and over without degrading of component. The Gas Discharge Tube (GDT) is a fully re-settable device that will protect against high voltage surges (lighting). Both GDT and SAD components return to its high impedance state when the voltage returns to normal levels. Space Age Electronics, Inc. www.Isae.com 800.486.1723 Toll Free 508.485.0966 Local 508.485.4740 Fax Space Age Electronics, Inc. 2010 No Excuses, Just Solutions! ED00543 LT10587 Rev.D 1/2 "SPACE AGE ELECTRONICS, INC. TDG Product Specifications: Transient Voltage surge protection devices will be UL 497A or B listed device Eclips TDG series. each unit is field replaceable. Surge Protective Device provides transient and over voltage protection on all electronic components. The device will employ a single ground bus with single point of ground termination and a 12AWG green ground strap with lug ring conector. All electronics are encased in a ABS polycarbonate type AF-312 enclosure that protects the electronics. Each device will have pluggable terminal connectors rated from 12-26 AWG. Each device is scalable and interlock with other like devices. Mounting option are direct screw in, snap track or standard din rail mounting. Typical applications include Fire/Life safety, Video Surveillance, access Control. Voice/Data and Building Automations, gate access, IP and networks. DG Device T05 T12 T24 T32 T36 T48 T70 T90 T120 Series Voltage: 6v 17v 30v 43v 44v 60v 95v 115v 130v Dissipation (J): 25j 321 401 58) 63) 80j 132i 160i 212j Capacitance: 35pF per arcud MCOV: 6v 14 4v 28.8v 36v 36.8v 57,6v 84v 108V 144v Max current operating Voltage Clamping Volts: 9v 17v 34v 37.5v 44.7v 65V 95v 122v 168v Maximum Surge Current: 10,000A Connection type: Screw terminal Clamping response: <1Pico Second Termination rating: 12AWG - 26AWG Circuit protected: 2 Circuits 4 wires Installation: Series Device Current Limiting: TDG - No Operating Temp: 45CI113F Max Continuous Current: TDG - 5A Max humidity: 85% Weight: 2.080z Wiring Diagrams: F O �Yhrc I t R j s Cuss B Space Age Electronics. Inc. www.isae.com 800.486.1723 Toll Free 508.485.0966 Local 508.485.4740 Fax No Excuses, Just Solutions! II��Si ngle Circuit Double Protectil 1�-s Interloairq Guides Cnrr.rii e Wirt' 1 Crcr��t) Two Circuits Ordering Information: T05-DG Sv T12 DG 12V T24-DG 24v T32-DG 32, T36 DC 36Y T48-DG 48v 170DG 70V 190 DG 90V T120-DG IN) Dimensions: CcCgaNe o Connectors Mounting Options: Sna;1 Trark Mount )')inin [)it) Bail Mount t ! ;i ticrc"v h�;aunt Th,,; .L lcum€snt t.' h,� Imttt o' vt-v 1,1c .r 17-17)04 79 `'r le'1.11 Clltit:InimE?r 2/2 ED00552 LT10587 Rev.D Standard Features: • Available in 120 VAC • UL Listed 1449 3rd Edition Type 2 & 3 • Includes lockout & labels per NFPA 72 2013 10.6.5.2 • Surface or conduit mounting • Diagnostic indicator light • Self restoring • 3 Wire device (18" length) Made In U.S.A. N�a Protection Safety and performance is what Eclips is all about. While there are many varying criteria to be considered for surge protective devices (SPD), if the design engineer neglects the importance there can be serious implications for the client and equipment. Every piece of electrical equipment is designed to operate at a specified nominal voltage. Typically equipment is designed to handle minor variations. However external sources such as lightning, motors, and short circuits cause wild and damaging variations. Critical systems wired to your electrical service like Fire Alarm Control Panels (FACP), Mass Notification systems, amplifiers, motors, pumps (HVAC), power boosters and many more must require appropriate levels surge protection. The E120 series is an ideal choice for your 120V AC applications. because it has the robustness not only to absorb a spike, but to clamp long enough to trip the branch circuit breaker and still be functional for additional surges. The number one cause of destruction, degradation and down- time of critical electrical equipment is from power surges and lightning strikes. The E120V-GT device is an ideal solution to protect equip- ment. UL listed it maintains system integrity and protects against transients introduced into / onto electrical lines via poor atmospheric and utility conditions as well as internally gener- ated inductive loads and transient TVSS It reduces system downtime associated with power surges and lightning strikes. Prevents destruction and degradation of electrical components in the system. Fix your nuisance and non -billable service calls as a result of transients and poor power quality and show your customer you care about system integrity. ISO 9001 REGISTERED COMPANY �- Uses UL Recognized Components "� Space Age Electronics, Inc. 2013 LT10629 Rev.6 112 r Space Age Electronics, Inc. ti"%w I SAE corn 800.486.1723 Toll Free 508A85 0966 Local 508.485.4740 Fax No Excuses, Just Solutions! JINSPACE MW ELECTRONICS, INC. Specifications: All 120volt AC equipment will have Transient Voltage Surge Suppression (TVSS) protection manu- factured by Space Age Electronics, Inc., part number E120V-GT ECLIPS Brand. The Unit shall be UL listed to standard 1449 rev 3. The unit will be labeled clearly with indelible ink. Mounting can be con- duit mounted with a'/," pipe threaded nipple to secure in panel. or surface panel mount with 2 external mounting holes. The unit shall have thermal fuses to protect against fire in short circuit conditions The E120V will have 18" long, 14 gauge wires (3x) ground wire must be green. The enclosure will be a non dielectric material UL94 QMFZ218 grade material providing UV protection. The unit shall provide visual indication (LED) that unit is protecting and functioning. Specifications - Performance: Short Circuit Current Rating (SCCR) Enclosure Material VPR=700(L - N) 700 (L - G) 600 (N - G) Capacitance Clamping Response Time Current Max Operating Voltage (MCOV) Design Operation Indicators 5KA UL94 Qk1FZ2!8 (green) < 2.000 pf < 5 nanoseconds Non -Load Bearing 140 volts AC_ 50160 Hz Thermally Fused Hybrid LED Specifications - Operating: Service Voltage 120 Single Phase Circuits Protected l -N L-G N-G Connection Type Hardwired Installation Configuration : Parallel Specifications - Physical: Weight 5 2oz Dimensions 2.75' x 1.55" x 4" long Operation Temperature -40 to +85° C Mechanical Drav Specifications - Compliance: i— Ut. Listed 1449 Third Edition - VZCA 1 5- �nl File Number E319370 Vol 1 Sec 1 �`��/J Wiring Diagram: 2.6" I� Breaker panel Protected Device EM Space Age Electronics, Inc www. I SAE com 800.486.1723 Toll Free 508.485.0966 Local 508.485.4740 Fax No Excuses. Just Solutions! Ordering Information: Part # Description E120V-GT 120V Hybrid Surge Protective Device ELOCK-FA Circuit Lockout Kit This document is subject to change without notice. see doc 4 ED0479 for legal disclaimer LT10629 Rev-6 2/2 P POTTER PAD100-PD ® The Symbol of Protection Photoelectric Smoke Sensor Features Low profile, less than 2 inches with the base • Wide selectable sensitivity range of 1.0 to 3.70/o/foot • Sensor communicates sensitivity to control panel • UL listed smoke calibration and sensitivity • Optional locking tab to prevent unwanted removal • Simple DIP switch address setting, no programming tool required • LED alarm indicator • Product includes a 5 year warranty • UUKL Listed for Smoke Control Description The Photoelectric Smoke Sensor is a listed Analog Addressable smoke sensor compatible with fire alarm control panels that utilize the Potter Addressable Device (PAD) protocol. The PAD 100-PD is a low profile smoke sensor with a wide sensitivity range. The sensor and base (not included) are made of a durable plastic in an off-white color to blend in with the ceiling. The PAD100-PD has a sensitivity range of 1.0 to 3.7 % per foot and is UL. The PAD100-PD features drift compensation and has built in dirty detector warning as well as. The PADI00-PD and the control panel communicate over a proven and robust digital communication path and the system analyzes the information at the particular device. The total polling speed is less than five (5) seconds. well under the UL requirements. The sensor is compatible with any of the PAD series sensor bases and simply twists on. The PADI00-PD is addressed using DIP switches in the rear of the sensor and can be easily programmed in the field without special tools. Setting the Address Each addressable device on the SLC loop must have a unique address from 1 to 127 to function properly. The address is set using DIP switches. Before connecting a device to the SLC loop, take the following precautions to prevent potential damage to SLC or device. Verify the following: Power to the device is removed 2. Field wiring is correctly installed. 3. Field wiring has no open or short circuits. F M ' ��• �: X. U ® � APPROVED LISTED Technical Specifications Operating Voltage 24 VDC Detector Current Draw 300 µA Alarm indicator I LED Alarm set -point range LO to 3.7 %/ft 3.6-12 °/a/m Installation temperature 32 to 120 ° F / 0 to 49 ° C range Operating relative 0% to 93% (Non -condensing) humidity range Start-up time Max. I sec. Maximum number of 127 addresses per loop Maximum number of lighted indicators in 30 alarm per loop. Color Eggshell White Weight (without base) 101 g (3.56oz) Dimensions (without Height: 1.35 in (34mm) base) Diameter: 3.93 in (100 mm) Potter Electric Signal Company, LLC St. Louis, MO Phone: 800-325-3936 www.pottersignal.com 9830108 - REV D • 12118 PAGE 1 OF 2 (E)POTTER PAD100-PD The Symbol of Protection Photoelectric Smoke Sensor Air Velocity Ratings The PAD 100-PD has an Open Area of Protection air velocity rating of 0 to 300 feet per minute. The system has a maximum of 30 LEDs that can be turned on simultaneously. If the system already has 30 LEDs on, the PAD 100-PD will operate even though the LED may not illuminate. Operation The PAD100-PD is an analog addressable sensor that uses one address on the Signaling Line Circuit (SLC) of a compatible fire alarm control panel. The unit communicates with the control panel as it is polled. The LEDs flash every time the unit is polled and they will flash at a fast rate if the unit is in an active status. The polling LED can be turned off if desired for less conspicuous operation. The PAD100-PD with the PAD100-4DB or PAD100-6DB has a low profile of less than two (2) inches to blend into the surrounding environment. The sensor includes an insect screen to prevent foreign objects from reaching the chamber and the can be cleaned to restore operation of a dirty detector. Sensor Sensitivity The PAD 100-PD and the compatible control panel work in tandem to keep the sensitivity consistent. As the sensor is installed over time, the sensor compensates for the dirt in the unit until it is out of range. At that time, the panel will indicate a dirty sensor. The sensor will then have to be cleaned or replaced. The PAD100-PD can be programmed to provide a maintenance alert prior to reaching the dirty sensor level which will allow for intervention prior to the sensor going into trouble. This allows for sensor replacement or cleaning prior to a nuisance trouble occurs. tiOTL': As required by NFPA, do not install the sensors until all construction is complete and the work area has been thoroughly cleaned. If the sensors have been installed in a construction environment, they should be cleaned or replaced before the system is placed into service. Spacing The PAD100-PD is UL listed with a recommended maximum spacing of 30 feet. Refer to NFPA 72 for specific information regarding detector spacing, placement and special applications. Compatible Bases All bases will mount on a single gang. double gang. octagon, 4" square or mud ring electrical box. Device Description Stock No. PAD 100-4DB 4" Standard Base 3992731 PAD100-6DB 6" Standard Base 3992732 PAD100-IB 6" base with an isolator module included. 3992730 PADI00-RB 6" base with one Form-C relay contact. 2A Cy 30VDC, 0.5A cr 125VAC 3992728 PAD100-SB 6" base with sounder module included. Sound pattern is provided from external source. 3992729 PAD100-SPKB 6" base with speaker included 3992762 Ordering Information Model Description I Stock No. PAD 100-PD Photoelectric Smoke Sensor 13992733 Potter Electric Signal Company, LLC St. Louis, MO Phone: 800-325-3936 www.pottersignal.com 8830108 - REV D • 12/18 PAGE 2 OF 2 .SYSTEM SENSOR Outdoor Selectable - Output Horns, Strobes, and Horn Strobes for Wall Applications SpectrAlertO Advance outdoor audible visible products are rich with features that cut installation times and maximize profits. Features • Weatherproof per NEMA 4X, IP56 • Listed to UL 1638 (strobe) and UL 464 (horn) • Compatible with System Sensor synchronization protocol and legacy SpectrAlert products • Field -selectable candela settings: 15, 15/75, 30, 75. 95, 110, 115, 135, 150, 177, and 185 • Automatic selection of 12- or 24-volt operation at 15 and 15/75 candela • Rotary switch for horn tone and three volume selections • Horn rated at 88+ dBA at 16 volts • Rated from —40°F to 151 °F • Universal mounting plate with an onboard shorting spring that tests wiring continuity before devices are installed • Plug-in design with minimal intrusion into the back box • Tamper -resistant construction • Listed for ceiling or wall mounting Aaencv Listinas SIGNALING ®� 1 LISTED F M MEA 7300-1653 1311 outdoor strobes) d roved 7125-1653 188 (hors strobes, 54011 (chimes, horn strobes. horns) APVNOVEo pp cnlme strobes) 53593 (outdoor and alert strobes) 3023572 MEA452-OS-E 7135-1653.189 (r,orns, crimes) ,., F E -��•' R E "7 E _ � 1 Z 9101 f o m S y n t n S e n i o r SpectrAlert Advance offers the broadest line of outdoor horns, strobes, and horn strobes in the industry. With white or red plastic housings, wall or ceiling mounting options, and plain or FIRE -printed devices, SpectrAlert Advance can meet virtually any application requirement, including indoor, outdoor, wet, and dry applications in temperatures from —40°F to 151 °F. Like the entire SpectrAlert Advance line, outdoor horns, strobes, and horn strobes for wall applications include a variety of features that increase application flexibility and simplify installation. First, field -selectable settings, including candela, automatic selection of 12- or 24-volt operation, horn tones, and three volume options enable installers to easily adapt devices to meet requirements. Next, SpectrAlert Advance devices use a universal mounting plate for both wall and ceiling applications. This mounting plate includes an onboard shorting spring that ensures wiring continuity before devices are installed, so installers can verify proper wiring without mounting the devices and exposing them to potential construction damage. Once the plates are mounted, all SpectrAlert Advance devices utilize a plug-in design with a single captured screw to speed installation and virtually eliminate costly ground faults. Outdoor devices ship with weatherproof plastic back boxes (metal back boxes are available separately) that accommodate in -and - out wiring for daisy chaining devices. Plastic back boxes feature removable side flanges and improved resistance to saltwater corrosion. Knock -outs located on the back eliminate the need to drill holes for screw -in mounting. Plastic and metal weatherproof back boxes come with 3/4-inch top and bottom conduit entries and 3/4-inch knock -outs at the back. A screw -in NPT plug with an 0-ring gasket for a watertight seal is included with each back box. AVDS115-02 • 12/312019 • Page 1 SpectrAlert Advance Outdoor Horn, Strobe, and Horn StrobeSpecifications General SpectrAlert Advance outdoor horns, strobes, and horn strobes shall mount to a weatherproof back box. A universal mounting plate shall be used for mounting ceiling and wall products. The notification appliance circuit wiring shall terminate at the universal mounting plate. Also, SpectrAlert Advance products, when used with the Sync•CircuitTM Module accessory, shall be powered from a non -coded notification appliance circuit output and shall operate on a nominal 12 or 24 volts. When used with the Sync•Circuit Module, 12-volt-rated notification appliance circuit outputs shall operate between 8.5 and 17.5 volts; 24-volt-rated notification appliance circuit outputs shall operate between 16.5 and 33 volts. Outdoor SpectrAlert Advance products shall operate between -40 and 151 degrees Fahrenheit from a regulated DC or full - wave rectified unfiltered power supply. Strobes and horn strobes shall have field -selectable candela settings including 15, 15/75, 30, 75, 95, 110, 115, 135, 150, 177, and 185. Strobe The strobe shall be a System Sensor SpectrAlert Advance Model listed to UL 1971 and shall be approved for fire protective service. The strobe shall be wired as a primary -signaling notification appliance and comply with the Americans with Disabilities Act requirements for visible signaling appliances, flashing at 1 Hz over the strobe's entire operating voltage range. The strobe light shall consist of a xenon flash tube and associated lens/reflector system. The strobe must be installed with its weatherproof back box in order to remain outdoor approved per UL. The strobe shall be suitable for use in wet environments. Horn Strobe Combination The horn strobe shall be a System Sensor SpectrAlert Advance Model listed to UL 1971 and UL 464 and shall be approved for fire protective service. The horn strobe shall be wired as a primary -signaling notification appliance and comply with the Americans with Disabilities Act requirements for visible signaling appliances, flashing at 1 Hz over the strobe's entire operating voltage range. The strobe light shall consist of a xenon flash tube and associated lens/reflector system. The horn shall have three audibility options and an option to switch between a temporal three pattern and a non -temporal (continuous) pattern. These options shall be set by a multiple position switch. On four -wire products, the strobe shall be powered independently of the sounder. The horn or horn strobe models shall operate on a coded or non -coded power supply. The horn strobe must be installed with its weatherproof back box in order to remain outdoor approved per UL. The horn strobe shall be suitable for use in wet environments. Operating Temperature -40°F to 151 °F (-40°C to 66°C) Strobe Flash Rate 1 flash per second Nominal Voltage Regulated 12 DC/FWR or regulated 24 DC/FWR1 Operating Voltage Ranger 8 to 17.5 V (12 V nominal) or 16 to 33 V (24 V nominal) Operating Voltage with MLD3 Sync Module 8.5 to 17.5 V (12 V nominal) or 16.5 to 33 V (24 V nominal) Input Terminal Wire Gauge 12 to 18 AWG Wall -Mount Dimensions (including lens) 5.6"L x 4.7-W x 2.5 "D (142 mm L x 119 mm W x 64 mm D) Horn Dimensions 5.6"L x 4.7-W x 1.3"D (142 mm L x 119 mm W x 33 mm D) Wall -Mount Weatherproof Back Box Dimensions (SA-WBB) 5.7"L x 5.1 ""W x 2.0-D (145 mm L x 130 mm W x 51 mm D) Notes: 1. Full Wave Rectified (FWR) voltage is a non -regulated, time -varying power source that is used on some power supply and panel outputs 2. 2. P, S, PC, and SC products will operate at 12 V nominal only for 15 and 15/75 cd. AVDS 115-02 • 12/3/2019 • Page 2 UL Current Draw Data UL Max. Strobe Current Draw (rnA RMS) MIMI! RWRTIM 8-17.5 Volts 16-33 Volts Candela DC FWR DC FWR Sound Pattern dB Standard Candela Range High Candela Range DC Input 8-17.5 Volts 16-33 Volts DC FWR DC FWR 15 123 128 66 71 Temporal High 57 55 69 75 15/75 142 148 77 81 Temporal Medium 44 49 58 69 30 75 95 110 115 135 NA NA 94 96 Temporal Low 38 44 44 48 NA NA 158 153 Non -Temporal High 57 56 69 75 NA NA 181 176 Non -Temporal Medium 42 50 60 69 NA NA 202 195 Non -Temporal Low 41 44 50 50 NA NA 210 205 Coded High 57 55 69 75 NA NA 228 207 Coded Medium 44 51 56 69 150 NA NA 246 220 Coded 177 NA NA 281 251 185 NA NA 286 258 Draw (mA RMS), 2-Wire Horn Strobe, Standard 8-175 Volts 16-33 Volts Low 40 46 52 50 15 15175 15 15/75 30 75 95 110 115 Temporal High 137 147 79 90 107 176 194 212 218 Temporal Medium 132 144 69 80 97 157 182 201 210 Temporal Low 132 143 66 77 93 154 179 198 207 Non -Temporal High 141 152 91 100 116 176 201 221 229 Non -Temporal Medium 133 145 75 85 102 163 187 207 216 Non -Temporal Low 131 144 68 79 96 156 182 201 210 FWR Input Temporal High 136 155 88 97 112 168 190 210 218 Temporal Medium 129 152 78 88 103 160 184 202 206 Temporal Low 129 151 76 86 101 160 184 194 201 Non -Temporal High 142 161 103 112 126 181 203 221 229 Non -Temporal Medium 134 155 85 95 110 166 189 208 216 Non -Temporal Low 132 154 80 90 105 161 184 202 211 UL Max. Current Draw (rnA RMS), 2-Wire Horn Strobe, High Candela Range (135-185 cd) 16-33 Volts 16-33 Volts DC Input 135 150 177 185 FWR Input 135 150 177 185 Temporal High 245 259 290 297 Temporal High 215 231 258 265 Temporal Medium 235 253 288 297 Temporal Medium 209 224 250 258 Temporal Low 232 251 282 292 Temporal Low 207 221 248 256 Non -Temporal High 255 270 303 309 Non -Temporal High 233 248 275 281 Non -Temporal Medium 242 259 293 299 Non -Temporal Medium 219 232 262 267 Non -Temporal Low 238 254 291 295 Non -Temporal Low 214 229 256 262 Candela Derating Horn Tones and Sound Output Data For K series products used at low temperatures, listed Horn and Horn Strobe Output candela ratings must be reduced in accordance with ,8-17.5 16-33 24-Volt Nominal this table. S it h S d Volts Volts Reverberant Anechoic OutputStrobe Listed Candela Candela rating at -40 F 15 Do not use below 32°F 15/75 30 75 44 95 70 110 110 115 115 135 135 150 150 177 177 185 185 wc Position oun Pattern dB DC FWR DC FWR DC FWR DC FWR 1 Temporal High 78 78 84 84 88 88 99 98 2 Temporal Medium 74 74 80 80 86 86 96 96 3 Temporal Low 71 73 76 76 83 80 94 89 4 Non- High Temporal 82 82 88 88 93 92 100 100 5 Non- Medium Temporal 78 78 85 85 90 90 98 98 6 Non- Low Temporal 75 75 81 81 88 84 96 92 7t Coded High 82 82 88 88 93 92 101 101 8t Coded Medium 78 78 85 85 90 90 97 98 9t Coded Low 75 75 81 81 88 85 96 92 tSettings 7, 8, and 9 are not available on 2-wire horn strobe. SpectrAlert Advance Diagrams 119mm Wail -Mount Horn Strobes Wall Plastic Weatherproof Back Box SpectrAlert Advance Ordering Information Red White Wall Horn Strobes Wall -Mount Horn Strobe with Plastic Weatherproof Back Box P2RK Pi 2-Wire Horn Strobe, Standard cd, Outdoor (includes plastic weatherproof back box) P2RK-P P2WK-P 2-Wire Horn Strobe, Standard cd, Outdoor, Plain (includes plastic weatherproof back box) P2RK-R P2WK-R 2-Wire Horn Strobe, Standard cd, Outdoor (does not include plastic weatherproof back box) P2RHK P2WHK ' 2-Wire Horn Strobe, High cd, Outdoor (includes plastic weatherproof back box) P2RHK-P P2WHK-P 2-Wire Horn Strobe, High cd, Outdoor, Plain (includes plastic weatherproof back box) P2RHK-R P2WHK-R 2-Wire Horn Strobe, High cd, Outdoor (does not include plastic weatherproof back box) P4RK P4WK 4-Wire Horn Strobe, Standard cd, Outdoor (includes plastic weatherproof back box) P4RK-R — 4-Wire Horn Strobe, Standard cd, Outdoor (does not include plastic weatherproof back box) P2RHK-120 — 2-Wire Horn Strobe, High cd, Outdoor, 120 V (includes plastic weatherproof back box) Wall Strobes SRK SWK Strobe, Standard cd, Outdoor (includes plastic weatherproof back box) SRK-P SWK-P Strobe, Standard cd, Outdoor, Plain (includes plastic weatherproof back box) SRK-R SWK-R Strobe, Standard cd, Outdoor (does not include plastic weatherproof back box) SRHK SWHK Strobe, High cd, Outdoor (includes plastic weatherproof back box) SRHK-P SWHK-P Strobe, High cd, Outdoor, Plain (includes plastic weatherproof back box) SRHK-R SWHK-R Strobe, High cd, Outdoor (does not include plastic weatherproof back box) Horns HRK — Horn, Red, Outdoor (includes plastic weatherproof back box) HRK-R — Horn, Red, Outdoor (does not include plastic weatherproof back box) Accessories SA-WBB SA-WBBW Metal Weatherproof Back Box WTP WTPW Metal Weatherproof Outdoor Flush-mountino Plate Notes: All -P models have a plain housing (no FIRE" mark ng on cover). All -R models require metal weatherproof outdoor flush mounting plate or a metal weatherproof outdoor back box (order separately) "Standard cd" refers to strobes that include 15, 15/75, 30, 75, 95, 110, and 115 candela settings. "High cd" refers to strobes that include 135, 150, 177, and 185 candela settings When replacing standard outdoor units both the device and back box must be replaced. SYSTEM 3825 Ohio Avenue • St. Charles, IL 60174 ©zo,9System Sensor . Phone: 800-SENSOR2 • Fax: 630-377-6495 °'= o-a speci4wt ons,u0jezl to hangc wdnou:notice v s t systemsensocco^' SENSOR or Curren[ proouct Information 115 0 - the latest versan of this tleta sheel. www.systemsensoccom avos„s-oz • 12i3i201e Honeywell THE POWEP OF CONNECTED L-Series Indoor Horns, Strobes, and Horn Strobes The L-Series and le v:siljl,-', orodu�.Ls Jfers tho most versatile and easy > iii wn, hn I ';: I o I a I I d Morn n in the it iclu,,,try v, 0- 11 l()v,,,jr --t j! v )t (I rav,(� , ir I C I Mn "`� Jt'M'tics- With White end red plc)-'t !I: t.'J Ii"oj jt o ; r)o c! devices, and plain, r)nu U Icd Sensor L-S e t 1 e. s earl t i) o t, t v i t ivaliv a n,/ -,a i i i -, q. L. 'r! m e n t The L-Series Line of well -mount horns, strobes. -.i-d horn strobes include a variety Of feotLI I P2: 'I la I 1"i,"'; I h-, I' tl I" 't I'-) n vr2t 5'Iti I I'v h fe simplifying nsU"l a. X1 '-J��v (2 1 -"1 dr It h m1lin I n-cl[ intrusion into the iu biuk bo>, i T �W(� 00 while virtua I ly eiimirlotw(i rw, 1,,, 1 j I I I �;_o t: I Ito t I r)J f; I ,j I!,, To further s.mplify lts ill,), (,n wd [ rot ifrom construction damage_ -h utilizs: a Uni�.',osal mounting plate for all mudekwsw u) ',o can testwiting continm-,,:etke d;_( Installers can also r_)a,,&/ \viJo ,ir�qo of application; requ rcments using settings, automatic. selection of 12- of 24-vcll operation, ar-d a rotary Switch for horn I_OM%s with tVv() VU'LJIIU 111[t,(:[J()[)s, F I R E INDOOR SELECTABLE -OUTPUT HORNS, STROBES, AND HORN STROBES FOR WALL APPLICATIONS L-SERIES SPECIFICATIONS ARCHITECT/ENGINEER SPECIFICATIONS GENERAL L-Series standard horns, strobes, and horn strobes shall mount to a standard 2 x 4 x 1 7/8-inch back box, 4 x 4 x 11/2-inch back box, 4-inch octagon back box, or double -yang back box. L-Series compact products shall mount to a single -gang 2 x 4 x 1 7/8-inch back box. A universal mounting plate shall be used for mounting ceiling and wall products for all standard models and a separate universal mounting plate shall be used for mounting wall compact models. The notification appliance circuit wiring shall terminate at the universal mounting plate. Also, L-Series products, when used with the Sync•Circuit-" Module accessory, shall be powered from a non - coded notification appliance circuit output and shall operate on a nominal 12 or 24 volts. When used with the Sync -Circuit Module, 12-volt-rated notification appliance circuit outputs shall operate between 8.5 and 17.5 volts; 24-volt-rated notification appliance circuit outputs shalt operate between 16.5 and 33 volts. Indoor L-Series products shall operate between 32 and 120 degrees Fahrenheit from a regulated DC or full -wave rectified unfiltered power supply. Strobes and horn strobes shalt have field -selectable candela settings including 15, 30, 75, 95, 110, 135, and 185. STROBE The strobe shall be a System Sensor L-Series Model ------- listed to UL 1971 and shalt be approved for fire protective service. The strobe shall be wired as a primary -signaling notification appliance and comply with the Americans with Disabilities Act requirements for visible signaling appliances, flashing at 1 Hz over the strobe's entire operating voltage range. The strobe light shall consist of a xenon flash tube and associated lens/reflector system. HORN STROBE COMBINATION The horn strobe shall be a System Sensor L-Series Model ------- listed to UL 1971 and UL 464 and shalt be approved for fire protective service. The horn strobe shall be wired as a primary -signaling notification appliance and comply with the Americans with Disabilities Act requirements for visible signaling appliances, flashing at 1 Hz over the strobe's entire operating voltage range. The strobe light shalt consist of a xenon flash tube and associated tens/reflector system. The horn shalt have two audibility options and an option to switch between a temporal three pattern and a non -temporal (continuous) pattern. These options are set by a multiple position switch. The horn on horn strobe models shall operate on a coded or non -coded power supply. SYNCHRONIZATION MODULE The module shall be a System Sensor Sync -Circuit model MD L3 listed to UL 464 and shall be approved for fire protective service. The module shall synchronize L-Series strobes at 1 Hz and horns at temporal three. Also, while operating the strobes, the module shall silence the horns on horn strobe models over a single pair of wires. The module shalt mount to a 4 11/16 x 4 11/16 x 2 1/8-inch back box. The module shalt also control two Style Y (class B) circuits or one Style Z (class A) circuit. The module shall synchronize multiple zones. Daisy chaining two or more synchronization modules together wit[ synchronize all the zones they control. The module shall not operate on a coded power supply. PHYSICAL Wall -Mount Dimensions (including tens) : ` C " - 4 1 2F,' D (143 mrn t i i_9 inns 3 r'nD) Compact Wall -Mount Dimensions (including lens): � . I > t x1.911' D113._.mmLxoinun` znvn i Horn Dimensions: 5.6" 1- , 4.7" bN ] . :�� " D _143 omi I * 119 rpm Vd 32 mm D) Compact Horn Dimensions "° I > bA I D I ?3mm L x 88rnm W z 32min D) ELECTRICAL SPECIFICATIONS Strobe Flash Rate: i t cislh pei secunJ Nominal Voltage Regulated Ii Operating Voltage Range: )v i ; � 'v n > 'I ),I ol u_> t(j V ! '4 V nomii1-0', Operating Voltage Range (MDL3) Sync Module: ?' `t V nominal)or 1V 5 t: 3V;2"W u,ina'J Input Terminal Wire Gauge: 1 2 "� ENVIRONMENTAL Standard Operating Temperature: Humidity Range:.1C)t� Notes: 1. I _,.e k rtr- ;'I 2.P,_-1 PC ivy AGENCY LISTINGS AND APPROVALS UL:I ttsl FM: Approved CSFM:I c"tJ UL MAX HORN CURRENT DRAW (mA RMS) SOUND PATTERN DB 8-17.5V 16-33V DC DC FWR Temporal High 39 44 54 Temporal Low 28 32 54 Non -Temporal High 43 47 54 Non -Temporal Low 29 32 54 Non -Temporal Low 29 32 54 3.1 KHz Temporal High 39 41 54 3.1 KHz Temporal Low 29 32 54 3.1 KHz Non -Temporal High 42 43 54 3.1 KHz Non -Temporal Low 28 29 54 Coded High 43 47 54 3.1 KHz Coded High 42 43 54 UL MAX STROBE CURRENT DRAW (mA RMS) CANDELA 8-17.5V 16-33V DC DC FWR CANDELA RANGE 15 88 43 60 30 143 63 83 75 N/A 107 136 95 N/A 121 155 110 N/A 148 179 135 N/A 172 209 185 N/A 222 1257 UL MAX CURRENT DRAW (mA RMS), 2-WIRE HORN STROBE, CANDELA RANGE (15-115 CD) 8-17.5V 16-33V DC INPUT 15CD 30CD 15CD 30CD 75CD 95CD 110CD 135CD 185CD EM Temp Hi 98 158 54 74 121 142 162 196 245 EM Temp Low 93 154 44 65 ill 133 157 184 235 EM Cont Hi 106 166 1 73 94 139 160 182 211 262 EM Cont Low 93 156 51 71 119 1139 162 190 239 3.1KTemp Hi 93 156 53 73 119 140 164 190 242 3.1K Temp Low 91 154 45 66 112 133 160 185 235 3.1K Cont Hi 99 162 69 90 135 157 175 208 261 3.1K Cont Low 93 156 52 72 119 138 1 162 192 242 16VFWR SWITCH POSITION 15CD 30CD 75CD 95CD 110CD 135CD 185CD EM Temp Hi 83 107 156 177 198 234 287 EM Temp Low 68 91 145 165 185 223 271 EM Cont Hi ill 135 185 207 230 264 316 EM Cont Low 79 104 157 175 197 1235 283 3.1KTemp Hi 81 105 155 177 196 234 284 3.1KTemp Low 68 90 145 166 186 222 276 3.1K Cont Hi 104 131 177 204 230 264 326 3.lK Cont Low 77 102 156 1 177 199 234 1291 HORN AND HORN STROBE OUTPUT (DBA) 8-17.5V 16-33V FWR SWITCH POSITION SOUND PATTERN DB DC DC 1 Temporal High 84 89 89 2 Temporal Low 75 83 83 3 Non -Temporal High 85 90 90 4 Non -Temporal Low 76 84 84 5 3.1 KHz Temporal High 83 88 88 6 3.1 KHz Temporal Low 76 82 82 7 3.1 KHz Non -Temporal High 84 89 89 8 3.1 KHz Non -Temporal Low 77 83 83 9 Coded High 85 90 90 10 3.1 KHz Coded High 84 89 �.V)' L-SERIES DIMENSIONS 3.46 1.91 .1 JIII -I II 5.27 14 -11 Compact Strobe I Horn Strobe 4.70 1.91 f. ... .. ......... . - — ----- 1.25 5.67 Strobe i Horn Strobe L-SERIES ORDERING INFORMATION WALL HORN STROBES P2RL:2-',,1v'iie l-WrnSliol)�.. rd P2WL:2-v',Vite Itorn Strobe 'white P2RL-P: 2-VV�ra, horn Strobe iced. Plain P2WL-P:2',,,`,:1,o Pla- P2RL-SP: 2-Wile. Hots -1 111 F, P2WL-SP: Horn Stroho FUF WALLSTROBES SRL: Strol)c�, P:_.d SGRL: C,-wipi, t .It Red SGWL: (-o I I-,,. ,-, .%hit( SRL-P:Sl-uhce,r..orJ 1) )111 SWL-P: ' SV UW)e ,hile mr, PI SRL-SP: SWL-CLR-ALERT.',t,-,I,( For more information Darn rTjf)r(- Honr',i jwn,�,! and 'thee Honeywell Security 6 Fire 1.2 Clinlonvilk, k,l),j(J hortlifoi(j I- I ,r:,'4 ;-; K,,0-328-C):1 �13 1.25 5 Compact Horn 4.70 1.25 5-67 Horn HORNS H R L: H r 1, 1), P'!-, d HWL: Horn. i. White HGRL: Cowl 3cl Hof,), Pr,(j ACCESSORIES TR-2: ljnivr al Wall Frwi Piriq I(l TR-2W: 1 - )I iivr,, i� V!,fl! _5 -i F6),� I i, S B B R L: I S.j I: c)CEI M"U I) FeiI- R,r-, Pe- I S B BW L: %;Va I I S I 'a c, M I- � r I t P. a,. k B,)x . 1A, I to S B B G R L: I) t V"a ',,i(', 1 1.1 1) !, B,) k R o> SBBGWL: M,-,tjnthack Note: All- P models having a plain housing (no"FIRE marking on cover. Alt-SP models have "FUEGO" marking on cover All -ALERT models have "ALERT" marking on cover Doc 351574 1 Rev 3 1 02/18 1 2018Ho,eyweOnte-ationai Inc f r C)PI-j! i-,tnq of all 1 s a -) d asev!Si* vI ti ,In(, P V: t _.oy%% e af riaK Ir:p to are sucject Honeywell tiMARTW iti t- 4 r GD01e) CABLE SPECIFICATIONS DESCRIPTION 16 AWG 2 Conductor Bare Copper, Non -Shielded Plenum Fire Alarm, FPLP (UL) CONDUCTOR 16 (Solid Bare Copper) INSULATION Low -Smoke PVC .010" COLOR CODE Black/Red LAY LENGTH 3.5" LHL (approx. 3.4 TPF) SHIELD N/A DRAIN WIRE N/A JACKET Low -Smoke PVC .018" JACKET COLOR Red Jacket MARKING FIRE/LIFE SAFETY CONTROL CABLE INIT. / IND. DEVICE / ZONE A B C D E 0 1 2 3 4 5 6 7 8 9 16 AWG FPLP (UL) ROHS MADE IN THE USA OVERALL DIAMETER .178" Nom CABLE WEIGHT 26 Lbs/Mft. CAPACITANCE 26 pF/Ft. Nom. IMPEDANCE 72 Ohms/Mft. DC RESISTANCE 4.10 Ohms/Mft (a 20 deg. C TEMPERATURE RATING 0 C to 75 C / 300 Volt INDUSTRY STANDARDS FLAME RATING Approved For Plenum Use Without Conduit Per NFPA 262 Flame Test AGENCY APPROVALS NEC Artide 800, 760; FPLP (UL), RoHS Compliant, Made in the USA All specifications referenced are nominal measurements unless otherwise noted. �'"ARlwrRr GL/ - CABLE SPECIFICATIONS DESCRIPTION 14 AWG 2 Conductor Bare Copper Non -Shielded Plenum Fire Alarm FPLP (UL) CONDUCTOR 14 (Stranded Bare Copper) INSULATION Low -Smoke PVC .008" COLOR CODE Black/Red SHIELD N/A DRAIN WIRE N/A JACKET Low -Smoke PVC .018" 3ACKET COLOR Red Jacket MARKING FIRE/LIFE SAFETY CONTROL CABLE INIT. / IND. DEVICE / ZONE A B C D E 0 1 2 3 4 5 6 7 8 9 14 AWG FPLP (UL) ROHS MADE IN THE USA OVERALL DIAMETER .210" Nom. CABLE WEIGHT 36 Lbs/Mft. CAPACITANCE 36 pF/Ft. Nom. IMPEDANCE 57.Ohms/Mft. TEMPERATURE RATING 0 C to 75 C / 300 Volt INDUSTRY STANDARDS FLAME RATING Approved For Plenum Use Without Conduit Per NFPA 262 Flame Test AGENCY APPROVALS NEC Article 800, 760; FPLP (UL), RoHS Compliant, Made In the USA l.II sPeaficdtrons referenced are nominal measurements unless otherwise noted. 11111iii, Mir c o m Safer • Smarter • More Livable Buildings Emergency Communication System Compact Package. Complex Features. All the features of a Premium Audio System: • SLC Control • Up to 60 Watts of audio output • Supports up to 6 panels • Digital Messaging • Expandable to 24 speaker outputs The best solution for Small to Mid -Sized applications. • Easy to install & configure • 30 Watt amplifier that can be expanded to 60 Watts (optional amplifier module) • Notifications can be sent using: 1) Stored digital recordings 2) Master microphone 3) Remote microphone • Comes with standard pre-recorded messages • Can store up to 12 minutes of digital recordings 2X30W 2X2.5A 2X30W 2X2.5A 2X30W 2X2.5A Speaker Circuits Strobe Circuits Speaker Circuits Strobe Circuits Speaker Circuits Strobe Circuits SLC or Relays RS-485 RS-485 Strobe Sync Strobe Sync (Optional) (Optional) Fire Alarm QX-MINI QX-MINI-BP QX-MINI-BP Control Panel Master Panel Booster Panel Booster Panel QX-MINI-RM Remote Microphone QX-MINI-LOC Example audio system with a FRCP, a QX-MINI Master Panel, two Booster Panels, and two Remote Microphones. Features: • Supports up to 60 Watts of audio output • Integrates with compatible intelligent fire alarm control units or with any UL-listed fire alarm control unit through relay contacts • Audio system supports up to 6 panels in total (one Master Panel with 5 Booster Panels) for a total of 360 Watts • Equipped with standard digital messages • Supports up to 6 remote microphones and/or Local Operating Consoles (LOC) • Select from 14 digital messages at the control panel • Custom messages using the software configurator • Two output circuits (2.5A each) for horns and strobes. Expandable up to 12 circuits • UL, ULC and CSFM approved NOW Available Omer TOdayr 11111iii,Mircom For more information call 1.888.660.4655 or visit Mircom.com Information supplied in this document is subject to change without notice. Mircom Technologies Ltd. assumes no responsibility or liability whatsoever for any errors or r- ■�' omissions that may appear in this document. Except as permitted by license, no part of this publication maybe reproduced, stored in a retrieval system, transmitted in any ,l \��`/ form by means electronic, mechanical, using any recorded media, or any other format without the prior written permission of Mircom Technologies Ltd. Secutron" name and graphic design are the exclusive property of Mircom Technologies Ltd. MIR QXMINI-SS 150042