15-16562 - Laserfiche WebLink

Browse Search

. . • . TRINIIY�ERD TABLE6B: STEEL-RECOVEti SYSTEM TYPE D-1: INSULATED,MECHANICALLY ATTACHED ROOF COVER (All areos where ihe existing me[al panels do not lay flush on the undeAying purlin shaN hove o 0.15-inch diameter pilot hole pre-drilled into the panel prior to driving the Purlin Fastener into the purlin.J System Insulation Roof Cover MDP Deck No. Type Attach Membrane Fasteners Attachment (Ps�) Existing standing seam or lap seam metal roof covers One or more layers, Prelim. Mule-Hide TPO-c Mule-Hide Purlin Fastener 12-inch o.c.within 5.5-inch wide laps spaced R-7 having min.16 ga.(0.0598-inch)to max.3/16-inch max.138.5-inch o.c.to engage steel purlin. 30.0 thick steel purlins spaced max.138.5-inch o.c. any combination attach or TPO-c EXTRA and 2.4 Seam Plate �aps sealed with 1.5-inch heat weld. Existing standing seam or lap seam metal roof covers One or more layers, Prelim. Mule-Hide TPO-c Mule-Hide Purlin Fastener 12-inch o.c.within 5.5-inch wide laps spaced R-8 having min.16 ga.(0.0598-inch)to max.3/16-inch max.115-inch o.c.to engage steel purlin. Laps -45.0 thick steel purlins spaced max.115-inch o.c. any combination attach or TPO-c EXTRA and 2.4 Seam Plate sealed with 1.5-inch heat weld. Existing standfng seam or lap seam metal roof covers pne or more layers, Prelim. Mule-Hide TPO-c Mule-Hide Purlin Fastener 12-inch o.c.within 5.5-inch wide laps spaced R-9 having min.16 ga.(0.0598-inch)to max.3/16-inch max.54.5-inch o.c.to engage steel purlin. Laps -60.0 thick steel purlins spaced max.54.5-Inch o.c. any combination attach or TPO-c EXTRA and 2.4 Seam Plate sealed with 1.5-inch heat weld. Existing standing seam or lap seam metal roof covers 6-inch o.c.within 5.5-inch wide laps spaced One or more layers, Prelim. Mule-Hide TPO-c Mule-Hide Purlin Fastener max.138.5-inch o.c.to en a e steel urlin. -60.0 R-10 having min.16 ga.(0.0598-inch)to max.3/16-inch any combination attach or TPO-c EXTRA and 2.4 Seam Plate g g P thick steel purlins spaced max.138.5-inch o.c. Laps sealed with 1.5-inch heat weld. Existing standing seam or lap seam metal roof covers One or more layers, Prelim. Mule-Hide TPO-c Mule-Hide Purlin Fastener 6-inch o.c.within 5.5-inch wide laps spaced -R=11--havingmin.-l6-ga.-(0:0598=inch)-to max.-3/16-inch- any combination attach or TPO-c EXTRA and 2.4 Seam Plate -max.90.5=inch_o.c._to_engagesteel_pu[lin._Laps_ -67.5 _ _ _ _ _ __ thick steel puriins spaced max.90.5-inch o.c. sealed with 1.5-inch heat weld. Existing standing seam or lap seam metal roof covers One or more layers, Prelim. Mule-Hide TPO-c Mule-Hide Purlin Fastener 9"�nch o.c.within 5.5-inch wide laps spaced R-12 having min.16 ga.(0.0598-inch)to max.3/16-inch any combination attach or TPO-c EX7RA and 2.4 Seam Plate max.114.5-inch o.c.to engage steel purlin. -75.0 thick steel purlins spaced max.114.5-inch o.c. Laps sealed with 1.5-inch heat weld. Existing standing seam or lap seam metal roof covers One or more layers, Prelim. Mule-Hide TPO-c Mule-Hide Purlin Fastener 6-inch o.c.within 5.5-inch wide laps spaced R-13 having min.16 ga.(0.0598-inch)to max.3/16-inch any combination attach or TPO-c EXTRA and 2.4 Seam Plate max.42.5-inch o.c.to engage steel purlin. Laps -82.5 thick steel purlins spaced max.42.5-inch o.c. sealed with 1.5-inch heat weld. Existing standing seam or lap seam metal roof covers One or more layers, Prelim. Mule-Hide TPO-c Mule-Hide Purlin Fastener 6-inch o.c.withi�5.5-inch wide laps spaced R-14 having min.16 ga.(0.0598-inch)to max.3/16-inch any combination attach or TPO-c EXTRA and 2.4 Seam Plate max.114.5-inch o.c.to engage steel purlin. -90.0 thick steel purlins spaced max.114.5-inch o.c. Laps sealed with 1.5-inch heat weld. Exterior Research and Design,LLC.d/b/a Trinity�ERD Evaluatlon Report M15060.06.09-R3 for FL12772-R3 Certifiwte of Authorixation tJ9503 Revision 3:03/18/2015 Prepared by: Robert Nieminen,PE-59166 Appendix 1,Page 16 of 18 I-