Laserfiche WebLink
seven hundred twenty-five(4,725)pounds then test shall be continued to strap failure and <br /> elongation recorded. <br /> (d) Hardness Test or Military Specification listing the properties. <br /> (4) 5trap Splice or Connections - <br /> (a) Strap splice shall require at least twelve inches(12") of strap overlap with two (2) <br /> seals evenly spaced. Each seal shall have two (2)crimps evenly spaced. All strap connections <br /> must be manufactured to meet minimum standards of rule 15C-1.0105 and must be approved by <br /> the department. <br /> (b) Factory installed sidewall and centerline bracket attachments shall require at least one� <br /> (1) seal with two(2) crimps or equivalent welds evenly spaced and protected with a radius clip or <br /> manufactured bent or formed radius protective tab. (Note: Bracket lacing or field threading shall <br /> not be used. <br /> (c) Vertical and frame tie connections must be designed to swivel where attached to the <br /> mobile/manufactured home and must be connected to the home by means of grade#5 bolts with <br /> a minimum diameter of one-half inch(%Z"). <br /> 23 <br />