|
� • A l '
<br /> U��T�� 1239 Jabara Ave.
<br /> 1 � North Port, FL 34288
<br /> ENGINEERING & Ph. 941-380-1574
<br /> CONSULTING, INC. FBPE C.O.A. #29779
<br /> Evaluation Report 430B
<br /> Apri127, 2015
<br /> Product Description: PVC 3"Mullion H-1758
<br /> Manufacturer: Custom Window Systems, Inc. 1900 SW 44�'Ave, Ocala,FL 34474
<br /> Statement of Compliance: This report evaluates the above-listed product per the requirements
<br /> of FAC Product Approval Rule Chapter 61 G20-3.005 (4). This product complies with the
<br /> requirements of the 5��'Edition (2014) Florida Building Code including the High Velocity
<br /> Hurricane Zone. The product testing standards performed are outlined below.
<br /> Technical Documentation:
<br /> 1) This report,prepared by Lucas A. Turner, P.E., at 1239 Jabara Ave.,North Port,FL
<br /> 2) Approval drawing CWS-430B, signed and sealed by Lucas A. Tuiner,P.E.
<br /> 3) Test Reports NCTL-210-3422-1, -lA, -2, -2A, -3, -3A, -4, and-4A, and NCTL-210-
<br /> 3427-1,-lA, -2, -2A, -3, -3A, -4, and-4A, from National Certified Testing Labaratories,
<br /> Orlando, FL signed and sealed by Gerard J. Ferrara,P.E.
<br /> a. Testing Performed: TAS 202 1994,AAMA/WDMA/CSA 101/LS.2/A440-2005,
<br /> and AAMA 450-06
<br /> 4) Supplemental Calcs. to support CWS-430B, signed/sealed by Lucas A. Turner, P.E.
<br /> Installation: Units must be installed according to approval document CWS-430B.
<br /> Limitations of Use: This product:
<br /> • May be used up to the sizes and design pressures as shown in CWS-430B,using clips as
<br /> shown in CWS-430B
<br /> • Is non-impact and requires the use of shutters in windborne debris regions
<br /> • May be used in the High Velocity Hurricane Zone
<br /> • May only be used with Custom Window System, Inc. PVC windows,please see separate
<br /> individual window unit approvals for applicable design pressures and for more details.
<br /> The lower of the individual window design pressures and the mullion design pressures
<br /> shall apply to the entire asseinbly.
<br /> • Requires 6063-T6 aluminum mullion and clip extrusions.
<br /> Certification of Independence: I do not have, nor do I intend to acquire, nor will I acquire, a
<br /> financial interest in Custom Window Systems or in any company manufacturing or distributing
<br /> products for which this report is being issued. I do not have,nor do I intend to acquire, nor will I
<br /> acquire, a financial interest in any other entity involved in the testing or approval process of this
<br /> product.
<br /> �tt1Ri1A81/)dt�� .
<br /> `�tsk��,,�h,Q Et�b�r �rA��r
<br /> �����s��,yy'�,'�tv��s�'"j�«*¢ x�
<br /> 9 ��
<br /> ,w�;�4 �m 592�1 R�s�� 4/27/2�1 S
<br /> �. , ; �
<br /> ��' " w
<br /> * � ��` � Lucas A. Turner, P.E.
<br /> `�' FL PE#58201
<br /> ��q s�A`rE t�� 'tar:
<br /> t
<br /> r�{�A�'�'� $�.',•�,*,r'Ka°►
<br /> *, � •..<,e�p t'�..� '��'.;' Lucas A. Turner
<br /> ` +s� ....... C? �
<br /> '�it��`r''�(,��r�����,+�` 2015-04-27 20:56-04:00
<br />
|