Laserfiche WebLink
�� ` . <br /> �T 1 p �E�� <br /> TABLE lA: WOOD DECKS-NEW CONSTRUCTION,REROOF(Tear-Off)or RECOVER <br /> SYSTEM TYPE C: MECHANICALLY ATTACHED INSULATION,BONDED ROOF COVER <br /> System Deck Top Insulation Layer MDP <br /> Base Insulation Layer Roof Cover Adhesive <br /> No. (See Note i) Type Fasteners Attach � (psf) <br /> Min.1.5-inch Poly ISO 1,H- <br /> (Optional)One or more layers,any Mule-Hide TPO-c/WBBA 2000 or <br /> W-1 Min.19/32"plywood orwood plank Shield,ACFoam II,Poly ISO 2 or See Note 2 1 per 2 ftZ -45.0` <br /> combination,loose laid ENRGY 3 Mule-Hide TPO-c Bonding Adhesive <br /> TABLE 18: WOOD DECKS—NEW CONSTRUCTION,REROOF(Tear-Off)or RECOVER <br /> SYSTEM TYPE D: INSULATED,MECHANICALLYATTACHED ROOF COVER <br /> Insulatlon Layer <br /> System Roof Cover <br /> Roof Deck (See Note 14) MDP <br /> No. (Psf� <br /> Type Attach Membrene Fasteners Spacing <br /> Min.19/32-inch plywood or wood plank at <br /> W z max.24"spans attached using 8d ring shank One or more layers, Preliminarily Mule-Hide Mule-Hide EHD Fasteners and 2.4 6-inch o.c.within 5.5-inch wide laps spaced 90.5-inch _52.5 <br /> nails spaced 6"o.c.in the field and#10 ring any combination attached TPO-c Seam Plates o.c. Outside of lap sealed with 1.5-inch heat-weld <br /> shank nails spaced 4"o.c.at the perimeter <br /> Min.19/32-inch plywood or wood plank at <br /> w 3 max.24"spans attached usfng 8d ring shank One or more layers, Preliminarily Mule-Hide Mule-Hide EHD Fasteners and 2.4 6-inch o.c.within 5.5-inch wide laps spaced 66.5-inch _67.5 <br /> nails spaced 6"o.c.in the ffeld and#10 ring any combination attached TPO-c Seam Plates o.c. Outside of lap sealed with 1.5-inch heat-weld <br /> shank nails spaced 4"o.c.at the perimeter <br /> 6-inch o.c.within 5-inch wide laps spaced 67-inch o.c. <br /> Min.23/32-inch OSB at max.24-inch spans Outside of lap sealed with 1.5-inch heat-weld <br /> W 4 attached using Sd ring shank nails spaced 6" One or more layers, Preliminarily Mule-Hide Mule-Hide EHD Fasteners and 2.4 and -67.5 <br /> o.c.in the field and 8"o.c.at intermediate any combination attached TPO-c Seam Plates 6-inch o.c.in one row centered between the laps. <br /> supports Center row covered with 6-inch wide cover strip <br /> sealed with 1.5-inch heat weld at all edges <br /> Exterior Research and Design,LLC.d/b/a Trinity�ERD Evaluation Report M15060.06.09-R3 for FL12772-R3 <br /> Certifitate of Authorization 1l9503 Revision 3:03/18/2015 <br /> Prepared by: Robert Nieminen,PE-59166 Appendfx 1,Page 3 of 18 <br /> -- ��� ��, <br /> I ��. <br />