Laserfiche WebLink
y t <br /> TRINITY,ERD <br /> 4.7 SuperiorFiex�Seai O Plus is a one-component roof surfacing compound. <br /> Specification: ASTM D3019,Type I <br /> Application Rate: Flood Coat(previously graveled): 5 to 8 gal/square <br /> Flood Coat(over asphalt glaze coat): Min.5 gal/square <br /> Flood Coat(over smooth surface without glaze coat):Min.5 gal/square. <br /> Container Size: 5 gallon unit <br /> Approved Use: Acceptable for use as flood coat/surfacing within any BUR or SBS modified bitumen roof system <br /> with a fire classification that refers to SuperiorFlex�Seal 0 Plus. <br /> Note: If used as a flood coat with aggregate surfacing, limitations set forth in FBC Section 1504.8 shall <br /> apply. <br /> 4.8 Wite Brite Elastomeric Coating is a white elastomeric acrylic-based roof coating. <br /> • pecifica ion: ASTM D6083 <br /> Substrates: Galvanized steel, structural concrete, smooth-surfaced BUR, smooth-surfaced APP modified <br /> bitumen or granule-surfaced SBS modified bitumen <br /> Surface Prep: Repair all surface cracks using Wite Brite� Cement, as applicable, in accordance with SR <br /> Products'published requirements. <br /> Priming: Prime surfaces using Wite Brite� AS Primer, as applicable, in accordance with SR Products' <br /> published requirements. <br /> Application Rate: Smooth SurFace: <br /> Base Coat:1.5 to 2.0 gal/square;Finish Coat: 1.5 to 2.0 gal/square <br /> Mineral Surface: <br /> Base Coat:2.0 to 3.0 gal/square;Finish Coat: 2.0 to 3.0 gal/square <br /> Container Size: 5 gallon unit <br /> Approved Use: Acceptable for use atop any roof system approval or fire rating directory listing (substrates <br /> noted above)that refers to Wite Brite�Elastomeric Coating or ASTM D6083 coating. <br /> 5. LIMITATIONS: <br /> 5.1 This is a building code evaluation. Neither Trinity�ERD nor Robert Nieminen, P.E. are, in any way, the Designer of <br /> Record for any project on which this Evaluation Report, or previous versions thereof, is/was used for permitting or <br /> design guidance unless retained specificallyforthat purpose. <br /> 5.2 This Evaluation Report is not for use in HVHZ. <br /> 5.3 Fire classification is not part of this Evaluation Report. Refer to a current Roofing Materials directory for fire <br /> classifications of roof assemblies using the components outlined herein. <br /> 5.4 SR Products Cements, Adhesives and Coatings are components for use in Approved roof assemblies. Refer to the <br /> "Approved Use" in Section 4 for each component. The Cements, Adhesives and Coatings noted herein are not <br /> purported to be Roofing Systems, and their use shall be governed by and limited to applications where Roof System <br /> Product Approval is not necessary (e.g., maintenance and repair) or where the components are called out in a Roof <br /> System Product Approval. <br /> 5.5 All products listed herein shall have quality assurance audit in accordance with F.A.C.Rule 61G203 requirements. <br /> Exterior Research and Design,LLC. Evaluation Report 535730.01.11-R3 <br /> Certificote ofAuthorizotion#9503 FL14381-R3 <br /> Revision 3:04/25/2015 <br /> Page 4 of 5 <br />