|
INSTALLED ON ALL DISCONNECT SWITCHES, CONTACTORS AND STARTERS. TEN (10) DAYS PRIOR TO BID DATE FOR ENGINEER'S APPROVAL TO SUBMIT.
<br />ENGINEERS APPROVAL OF THE PRIOR APPROVAL PACKAGE WILL BE CONSIDERED
<br />13.1. ALL FUSES FOR SAFETY SWITCHES SHALL BE DUAL ELEMENT, CARTRIDGE TYPE FUSES SHALL BE PRELIMINARY. FINAL APPROVAL WILL BE CONTINGENT UPON REVIEW OF FINAL SHOP
<br />THOSE MANUFACTURED BY EITHER BUSSMAN OR UTTLEFUSE. THE CONTRACTOR SHALL FURNISH DRAWINGS. ALL PROPOSED ALTERNATES MUST BE INDUSTRY STANDARD EQUALS TO THE ITEMS
<br />TO THE OWNER ONE SPARE FUSE FOR EACH SIZE AND TYPE OF FUSE INSTALLED, FUSES 600 AMPS SPECIFIED AS THE BASIS OF DESIGN; HOWEVER, IF THE ITEMS ARE NOT CONSIDERED EQUAL BY
<br />OR LESS SHALL BE CLASS RK1, TYPICAL UNLESS OTHERWISE NOTED. FUSES OVER 600 AMPS SHALL THE ENGINEER, IT SHALL BE DISAPPROVED FOR FINAL SUBMITTAL IF ELECTRICAL CONTRACTOR/
<br />BE CLASS L GENERAL CONTRACTOR DOES NOT SUBMIT SHOP DRAWINGS TO ELECTRICAL ENGINEER FOR ITEMS -
<br />LISTED ABOVE, ELECTRICAL ENGINEER WILL NOT BE RESPONSIBLE FOR ANY, AND OR OMISSIONS
<br />14. ALL GENERAL PURPOSE SWITCHES AND RECEPTACLES SHALL BE THE PRODUCT OF A SINGLE OR ERRORS DUE TO SHOP DRAWINGS NOT SUBMITTED. SHOP DRAWINGS WILL ONLY BE REVIEWED
<br />MANUFACTURER. CATALOG NUMBERS LISTED ARE LEVITON: HOWEVER, COMPARABLE DEVICES BY TWICE AS PART OF THIS CONTRACT. ADDITIONAL SHOP DRAWING REVIEWS SHALL BE INVOICED
<br />PASS & SEYMOUR, BRYANT, OR ARROW HART WILL BE ACCEPTED. COLOR OF DEVICES AND AT $85.00 PER HOUR, BILLABLE TO THE SUB -CONTRACTOR, C.O.D.
<br />PLATES SHALL BE DICTATED BY ARCHITECT/OWNER. 27. CONTRACTOR SHALL MAINTAIN A COMPLETE SET OF CONTRACT DRAWINGS AT JOB SITE WITH
<br />A. SWITCHES: LEVITON #CSB1-201 COLORED MARKINGS INDICATING PROGRESS OF WORK. THIS SET OF CONTRACT DRAWINGS IS TO
<br />B. RECEPTACLES: LEVITON R20 -I BE SEPARATE FROM AND IN ADDITION TO CONTRACTOR'S CONSTRUCTION SET. ` EVERY UNIT OF
<br />#B EQUIPMENT, DEVICE, CONDUIT AND WIRE IS TO MARKED WHEN INSTALLED. USE GREEN TO
<br />C. COVER PLATES: SMOOTH PLASTIC INDICATE INSTALLATION AS SHOWN ON DRAWINGS AND USE $EQ TO INDICATE FIELD CHANGES.
<br />NOTE: ALL OTHER REQUIRED DEVICES SHALL MATCH IN COLOR AND STYLE. UPON COMPLETION OF WORK, THIS SET OF CONTRACT DRAWINGS IS TO BE TURNED OVER TO,
<br />AND BECOME PROPERTY OF THE ARCHITECT.
<br />15. IT IS NOT THE INTENT OF THESE PLANS TO SHOW EVERY MINOR DETAIL OF CONSTRUCTION. THE 28. THE OWNER RESERVES THE RIGHT TO REVISE THE DRAWING FROM TIME TO TIME TO INDICATE
<br />CONTRACTOR IS EXPECTED TO FURNISH AND INSTALL ALL ITEMS FOR A COMPLETE ELECTRICAL CHANGES IN THE WORK. WHEN REVISED DRAWINGS AND/OR ANY REVISIONS ARE ISSUED, THE
<br />SYSTEM, AND PROVIDE ALL NECESSARY DEVICES AND COMPONENTS FOR EQUIPMENT BE PLACED IN CONTRACTOR SHALL EVALUATE THE CHANGES PROMPTLY. BEFORE INSTALLATION OF ANY ITEM OR
<br />PROPER WORKING ORDER. PERFORMANCE THE WORK INDICATED BY THE REVISED DRAWINGS OR REVISIONS, THE CONTRACTOR
<br />SHALL NOTIFY THE ARCHITECT/ENGINEER IN WRITING THAT THE REVISED DRAWINGS INVOLVE AN
<br />16.1. A SEPARATE, GREEN TYPE THW COPPER GROUND CONDUCTOR SHALL BE RUN FROM GROUND LUG OF AN ADDITION OR DEDUCTION OF A SPECIFIC AMOUNT OF MONEY TO THE CONTRACT PRICE. THE
<br />EACH GROUNDED RECEPTACLE TO AN APPROVED CONNECTION INSIDE THE ENCLOSING STEEL OUTLET CONTRACTOR SHALL NDI PROCEED WITH THE REVISED WORK WITHOUT PRIOR WRITTEN APPROVAL BY
<br />BOX. DEVICE MOUNTING SCREWS SHALL NOT BE CONSIDERED AN APPROVED GROUND. THE ARCHITECT/ENGINEER OF THE COST OF THE REVISED WORK.
<br />16.2. A SEPARATE GROUND CONDUCTOR SHALL BE INSTALLED IN EVERY CONDUIT AND RACEWAY AND 29. IF ELECTRICAL CONTRACTOR HAS QUESTIONS, OR IN THEIR OPINION FINDS OMISSIONS OR
<br />SECURELY BONDED IN AN APPROVED GROUNDING TERMINAL AT BOTH ENDS OF THE RUN. THE ERRORS ON ELECTRICAL DOCUMENTS, IT IS THEIR RESPONSIBILITY TO BRING THIS TO THE
<br />GROUNDING CONDUCTOR SHALL BE SIZED IN ACCORDANCE WITH TABLE 250-95 OF THE N.E.C. ATTENTION OF THE ELECTRICAL ENGINEER/ARCHITECT/OWNER IMMEDIATELY. IF ELECTRICAL
<br />CONTRACTOR SHALL SIZE CONDUIT TO ACCOMMODATE ADDITIONAL CONDUCTOR. CONTRACTOR PROCEEDS WITH ARY CHANGES TO THE CONTRACT DOCUMENTS WITHOUT WRITTEN
<br />PRIOR APPROVAL FROM THE ELECTRICAL ENGINEER/ARCHITECT/OWNER WILL NOT BE COMPENSATED.
<br />16.3. GROUND RODS SHALL BE 5/8" DIAMETER, TEN (10) FEET LONG COPPERCLAD STEEL OBTAIN FIVE
<br />(5) OHMS MAXIMUM RESISTANCE AS READ WITH A OHM METER, USING TWO REFERENCE RODS.
<br />IF FIVE (5) OHMS CANNOT BE ACHIEVED, CONTRACTOR SHALL PROVIDE ADDITONAL RODS, UNTIL
<br />FIVE (5) HAS BEEN OBTAINED.
<br />4ole 0/w
<br />.�.�� L��
<br />.a
<br />UL4I uu
<br />V co co
<br />cli cri
<br />00 0o
<br />00
<br />Lo
<br />O � �
<br />r r
<br />O � M
<br />co
<br />OG °
<br />a�
<br />S.. C
<br />ca °
<br />I.,_ c) m
<br />I
<br />ul
<br />4
<br />rfir-
<br />00
<br />o�
<br />.� w ��N
<br />U w
<br />O Q X
<br />E o
<br />m Za
<br />Lij .. °' .
<br />N
<br />N I N F
<br />d-
<br />41 � A co O
<br />to >.,, o
<br />CS$ o
<br />W U co UJ
<br />m _
<br />c
<br />O 0
<br />0
<br />�i N Q
<br />CSS tet-
<br />w -
<br />r
<br />o
<br />p
<br />Q
<br />E
<br />F
<br />F
<br />r
<br />O E
<br />0U-
<br />-
<br />cn =
<br />00 a
<br />N
<br />- 0
<br />0 U
<br />ry cn
<br />0 < o
<br /><C w ct
<br />- Q F
<br />o� p u0
<br />< o _
<br />t� w to
<br />BT 04 748
<br />E
<br />26 AUG 04
<br />D 0
<br />L.
<br />ELECTRICAL
<br />SPECIFICATIONS
<br />1.
<br />MATERIALS AND INSTALLATION, AS A MINIMUM, ARE TO CONFORM WITH THE LATEST EDITION
<br />17. LOAD DATA IS BASED ON INFORMATION GIVEN ENGINEER AT THE TIME OF DESIGN. VERIFY ALL
<br />OF THE NATIONAL ELECTRIC CODE, THE LATEST EDITION OF N.F.P.A., AND THE LATEST EDITIONS
<br />EQUIPMENT NAMEPLATE RATINGS BEFORE ORDERING.
<br />OF THE LOCAL CODES AND ORDINANCES, INCLUDING ALL AMENDMENTS TO THE N.E.C. EQUIPMENT,
<br />WHERE APPLICABLE, WILL BE LISTED WITH THE UNDERWRITERS LABORATORIES, INC. QUALITY AND
<br />18. CIRCUITS SHOWN ON PLANS ARE TO DETERMINE LOAD DATA AND PANEL SIZES. THE CONTRACTOR
<br />WORKMANSHIP ESTABLISHED BY DRAWINGS AND SPECIFICATIONS ARE NOT TO BE REDUCED BY THE
<br />IS TO PROVIDE CIRCUITS AND ROUTING OF CONDUITS TO SUIT JOB CONDITIONS.
<br />ABOVE MEN110NED CODES.
<br />19. FURNISH AND INSTALL DISCONNECT SWITCHES, WIRING, AND CONNECTIONS ON AIR CONDITIONING
<br />2.
<br />BIDDERS ARE TO VISIT THE SITE AND FAMILIARIZE THEMSELVES WITH EXISTING CONDITIONS AND
<br />SYSTEM AS SHOWN ON PLANS. ELECTRICAL CONTRACTOR SHALL VERIFY AND COORDINATE WITH
<br />SATISFY THEMSELVES AS TO THE NATURE AND SCOPE OF WORK. THE SUBMISSION OF A BID WILL
<br />MECHANICAL CONTRACTOR REGARDING SUPPLY AND INSTALLATION OF ALL REQUIRED CONTROLS.
<br />BE EVIDENCE THAT SUCH AN EXAMINATION HAS BEEN MADE. LATER CLAIMS FOR LABOR, EQUIPMENT,
<br />OR MATERIALS REQUIRED, OR FOR DIFFICULTIES ENCOUNTERED WHICH COULD HAVE BEEN FORESEEN
<br />THE DISCONNECT SWITCH, FUSE SIZES, CONDUIT AND WIRE SHOWN FOR ALL HVAC ARE SIZED PER 20.
<br />HAD AN EXAMINATION BEEN MADE, WILL NOT BE ALLOWED.
<br />THE MANUFACTURER, AND MODEL NUMBER LISTED ON THE MECHANICAL PLANS. IF THERE IS AN
<br />EQUAL MANUFACTURER, OR OTHER MANUFACTURER PROVIDED, THE MECHANICAL/
<br />3.
<br />ALL WORK SHALL BE PERFORMED BY A LICENSED ELECTRICAL CONTRACTOR IN A FIRST-CLASS
<br />GENERAL CONTRACTOR SHALL BEAR ANY ADDITIONAL COST INCURRED IF THE ELECTRICAL
<br />WORKMANLIKE MANNER. THE COMPLETED SYSTEM IS TO BE FULLY OPERABLE AND ACCEPTANCE OF
<br />IS NOT EQUAL TO SPECIFICATIONS.
<br />THIS SYSTEM BY THE ENGINEER/ARCHITECT MUST BE A CONDITION OF THE SUB CONTRACT.
<br />21. ALL SWITCHGEAR, PANELS, STARTERS, CONTACTORS ETC., SHALL BE THE PRODUCT OF A SINGLE
<br />4.
<br />ALL WORK TO BE COORDINATED WITH OTHER TRADES TO AVOID INTERFERENCE WITH THE
<br />MANUFACTURER, THE SYSTEM DESIGN IS BASED ON SQUARE "D"; HOWEVER, COMPARABLE EQUIPMENT
<br />PROGRESS OF CONSTRUCTION.
<br />BY SIEMENS AND CUTLER HAMMER ONLY WILL BE ACCEPTABLE. TANDEM AND HALF -SPACE
<br />CIRCUIT BREAKERS SHALL NOT BE USED.
<br />5.
<br />CONTRACTOR TO GUARANTEE ALL MATERIALS AND WORKMANSHIP FREE FROM DEFECTS FOR PERIOD
<br />21.1. TYPEWRITTEN CIRCUIT INDEX SHALL BE AFFIXED TO INSIDE SURFACE OF EACH PANELBOARD
<br />OF NOT LESS THAN ONE (1) YEAR FROM DATE OF ACCEPTANCE.
<br />DOOR, CLEARLY INDICATING AREA AND TYPE OF LOAD SERVED BY EACH BRANCH CIRCUIT
<br />PROTECTIVE DEVICE, INCLUDING SPARES. HAND PRINTED WILL NOT BE ACCEPTED.
<br />6.
<br />CORRECTION OF ANY DEFECTS TO BE COMPLETED WITHOUT ADDITIONAL CHARGE AND TO INCLUDE
<br />REPLACEMENT OR REPAIR OF ANY OTHER PHASE OF THE INSTALLATION WHICH MAY HAVE BEEN
<br />21.2. ENGRAVED, LAMINATED PLASTIC IDENTIFICATION PLATES SHALL BE FURNISHED AND INSTALLED
<br />DAMAGED THEREBY.
<br />ON ALL PANELS AND SWITCHGEAR. PLATES SHALL BE AFFIXED TO FRONT OF PANELS, INDICATING
<br />PANEL NAME, VOLTAGE AND AMPERAGE.
<br />7.
<br />ALL REQUIRED INSURANCE TO BE PROVIDED FOR PROTECTION AGAINST PUBLIC LIABILITY OF
<br />PROPERTY DAMAGE FOR THE DURATION OF THE WORK.
<br />22. ALL UNDERGROUND PVC CONDUIT RUNS SHALL HAVE RIGID STEEL ELBOWS AND RIGID STEEL
<br />SECTIONS AT SLAB PENETRATIONS WHERE SUBJECT TO POSSIBLE DAMAGE.
<br />8.
<br />CONTRACTOR TO PAY FOR ALL PERMITS, FEES INSPEC110NS AND TESTINGS.
<br />23. THE ELECTRICAL CONTRACTOR SHALL MEET AND COORDINATE WITH THE LOCAL POWER COMPANY
<br />9.
<br />ELECTRICAL INSTALLATION TO MEET ALL STANDARD REQUIREMENTS OF LOCAL POWER AND
<br />AT THE SITE PRIOR TO CONSTRUCTION. AT THAT TIME, THE CONTRACTOR SHALL COORDINATE
<br />TELEPHONE COMPANIES. ELECTRICAL CONTRACTOR SHALL CONTACT LOCAL POWER AND
<br />ALL RELATED WORK WITH THE UTILITY COMPANY'S RESPONSIBILITIES TO MEET THE OWNER'S
<br />TELEPHONE COMPANIES PRIOR TO START OF CONSTRUCTION.
<br />SCHEDULE.
<br />10.
<br />ALL WIRING SHALL BE IN CONDUIT UNLESS OTHERWISE NOTED, MINIMUM WIRE SIZE SHALL
<br />-24. ALL ELECTRICAL CONDUCTORS SHALL BE INSTALLED IN AN APPROVED RACEWAY, EMT, IMC, RIGID
<br />BE #12 AWG, EXCLUDING CONTROL WIRING. ALL CONDUCTORS SHALL BE COPPER WITH
<br />GALVANIZED CONDUIT OR SCHEDULE 40 P.V.C. THERE SHALL BE NO TYPE 'NM', ELECTRICAL
<br />THWN/THHN INSULATION. CONDUCTORS #10 AND SMALLER MAY BE SOLID; ALL THOSE #8
<br />NON-METALLIC TUBING, & FLEXIBLE METAL CONDUIT USED FOR BRANCH CIRCUITING. MAXIMUM
<br />-
<br />AND LARGER TO BE STRANDED.
<br />NUMBER OF 120V CIRCUITS ALLOWED IN A COMMON CONDUIT SHALL BE SIX (6). THE
<br />CONTRACTOR SHALL STRICTLY CONFORM TO THE N.E.C. REQUIREMENTS OF DERATING FOR
<br />11.
<br />ALL UNDERGROUND RACEWAYS SHALL BE MINIMUM 3/4% GALVANIZED RIGID STEEL CONDUIT OR
<br />CONDUCTOR AMPACITY AND CONDUIT FILL NO CONDUITS SHALL BE INSTALLED, EXPOSED ON
<br />SCHEDULE 40 PVC. ALL OTHER RACEWAYS TO COMPLY WITH GOVERNING CODES. WHERE RIGID STEEL
<br />ROOF. HOSPITAL GRADE MC CABLE SHALL BE USED IN MRI TREATMENT ROOM.
<br />IS USED, IT SHALL BE COMPLETELY COATED WITH AN ALKALI AND RUST RESISTANT BITUMASTIC
<br />24.1. CONDUCTORS SHALL BE COLOR CODED AS FOLLOWS:
<br />PAINT, KOPPER NO. 50, AND THREADS SHALL BE COATED WITH ZINC CHROMATE. RIGID STEEL
<br />208V SYSTEM 480V SYSTEM PHASE SEQUENCE
<br />SHALL ALSO BE USED WHEN CONDUIT IS EXPOSED TO EXTERIOR ENVIRONMENT SUCH AS EXTERIOR
<br />NEUTRAL - WHITE NEUTRAL - WHITE ABC, TOP TO BOTTOM
<br />OF BUILDING OR WHERE IT IS EXPOSED AND SUBJECT TO DAMAGE, INSIDE OF BUILDING. WHERE
<br />PHASE A - BLACK PHASE A -- BROWN LEFT TO RIGHT, FRONT
<br />SCHEDULE 40 PVC HAS BEEN INSTALLED BELOW GRADE OR SLAB, IT SHALL TRANSITION TO RIGID
<br />PHASE B - RED PHASE B - ORANGE TO BACK
<br />STEEL AT GRADE TO FIRST DEVICE OR WIREWAY, REGARDLESS OF LOCATION.
<br />PHASE C - BLUE PHASE C - YELLOW
<br />11.1
<br />ALL UNDERGROUND SERVICE CONDUITS aACEWAYS ENTERING BUILDING OR STRUCTURE FROM
<br />GRD.CON - GREEN GRD.CON - GREEN
<br />OUTSIDE TO INSIDE SHALL BE SEALED, INCLUDING SPARE CONDUITS. SEALANT SHALL BE SUITABLE
<br />24.2. WHEN MAIN ELECTRICAL SERVICE HAS A WIREWAY, E.C. SHALL TAP OFF OF ALL SERVICE ENTRANCE
<br />FOR THIS USE.
<br />FEEDERS (PARALLEL CONDUCTORS) FOR TOTAL AMPACITY & BALANCING.
<br />12.
<br />-
<br />OUTLET BOXES SHALL BE PRESSED STEEL IN DRY LOCATIONS, CAST ALLOY WITH THREADED HUBS
<br />25. CONTRACTOR SHALL BE RESPONSIBLE FOR SEALING ALL CONDUIT PENETRATIONS MADE THROUGH
<br />IN WET OR DAMP LOCATIONS, AND BE OF SPECIAL CONSTRUCTION FOR OTHER CLASSIFIED AREAS.
<br />ALL BOXES SHALL BE RECESSED (FLUSH) IN WALLS OR CEILINGS WHENEVER POSSIBLE.
<br />FIRE RATED WALLS, CEILINGS, SLABS, ETC. PENETRATION SEALS SHALL BE PER U.L ASSEMBLY
<br />STANDARDS.
<br />13.
<br />DISCONNECT SWITCHES SHALL BE H.P. RATED, GENERAL DUTY, QUICK -MAKE, QUICK -BREAK TYPE.
<br />ENCLOSURES SHALL BE AS REQUIRED BY N.E.C. AND LOCATION (WEATHERPROOF, EXPLOSION
<br />26. CONTRACTOR SHALL PROVIDE SHOP DRAWING SUBMITTALS FOR LIGHT FIXTURES, SWITCHGEAR,
<br />PROOF ETC) ENGRAVED LAMINATED PLASTIC IDENIIFICA110N PLATES SHALL BE FURNISHED AND
<br />WIRING DEVICES, AND ALL SYSTEMS (FIRE ALARM, SECURITY, ETC.) PROVIDE TWO (2) COPIES,
<br />INSTALLED ON ALL DISCONNECT SWITCHES, CONTACTORS AND STARTERS. TEN (10) DAYS PRIOR TO BID DATE FOR ENGINEER'S APPROVAL TO SUBMIT.
<br />ENGINEERS APPROVAL OF THE PRIOR APPROVAL PACKAGE WILL BE CONSIDERED
<br />13.1. ALL FUSES FOR SAFETY SWITCHES SHALL BE DUAL ELEMENT, CARTRIDGE TYPE FUSES SHALL BE PRELIMINARY. FINAL APPROVAL WILL BE CONTINGENT UPON REVIEW OF FINAL SHOP
<br />THOSE MANUFACTURED BY EITHER BUSSMAN OR UTTLEFUSE. THE CONTRACTOR SHALL FURNISH DRAWINGS. ALL PROPOSED ALTERNATES MUST BE INDUSTRY STANDARD EQUALS TO THE ITEMS
<br />TO THE OWNER ONE SPARE FUSE FOR EACH SIZE AND TYPE OF FUSE INSTALLED, FUSES 600 AMPS SPECIFIED AS THE BASIS OF DESIGN; HOWEVER, IF THE ITEMS ARE NOT CONSIDERED EQUAL BY
<br />OR LESS SHALL BE CLASS RK1, TYPICAL UNLESS OTHERWISE NOTED. FUSES OVER 600 AMPS SHALL THE ENGINEER, IT SHALL BE DISAPPROVED FOR FINAL SUBMITTAL IF ELECTRICAL CONTRACTOR/
<br />BE CLASS L GENERAL CONTRACTOR DOES NOT SUBMIT SHOP DRAWINGS TO ELECTRICAL ENGINEER FOR ITEMS -
<br />LISTED ABOVE, ELECTRICAL ENGINEER WILL NOT BE RESPONSIBLE FOR ANY, AND OR OMISSIONS
<br />14. ALL GENERAL PURPOSE SWITCHES AND RECEPTACLES SHALL BE THE PRODUCT OF A SINGLE OR ERRORS DUE TO SHOP DRAWINGS NOT SUBMITTED. SHOP DRAWINGS WILL ONLY BE REVIEWED
<br />MANUFACTURER. CATALOG NUMBERS LISTED ARE LEVITON: HOWEVER, COMPARABLE DEVICES BY TWICE AS PART OF THIS CONTRACT. ADDITIONAL SHOP DRAWING REVIEWS SHALL BE INVOICED
<br />PASS & SEYMOUR, BRYANT, OR ARROW HART WILL BE ACCEPTED. COLOR OF DEVICES AND AT $85.00 PER HOUR, BILLABLE TO THE SUB -CONTRACTOR, C.O.D.
<br />PLATES SHALL BE DICTATED BY ARCHITECT/OWNER. 27. CONTRACTOR SHALL MAINTAIN A COMPLETE SET OF CONTRACT DRAWINGS AT JOB SITE WITH
<br />A. SWITCHES: LEVITON #CSB1-201 COLORED MARKINGS INDICATING PROGRESS OF WORK. THIS SET OF CONTRACT DRAWINGS IS TO
<br />B. RECEPTACLES: LEVITON R20 -I BE SEPARATE FROM AND IN ADDITION TO CONTRACTOR'S CONSTRUCTION SET. ` EVERY UNIT OF
<br />#B EQUIPMENT, DEVICE, CONDUIT AND WIRE IS TO MARKED WHEN INSTALLED. USE GREEN TO
<br />C. COVER PLATES: SMOOTH PLASTIC INDICATE INSTALLATION AS SHOWN ON DRAWINGS AND USE $EQ TO INDICATE FIELD CHANGES.
<br />NOTE: ALL OTHER REQUIRED DEVICES SHALL MATCH IN COLOR AND STYLE. UPON COMPLETION OF WORK, THIS SET OF CONTRACT DRAWINGS IS TO BE TURNED OVER TO,
<br />AND BECOME PROPERTY OF THE ARCHITECT.
<br />15. IT IS NOT THE INTENT OF THESE PLANS TO SHOW EVERY MINOR DETAIL OF CONSTRUCTION. THE 28. THE OWNER RESERVES THE RIGHT TO REVISE THE DRAWING FROM TIME TO TIME TO INDICATE
<br />CONTRACTOR IS EXPECTED TO FURNISH AND INSTALL ALL ITEMS FOR A COMPLETE ELECTRICAL CHANGES IN THE WORK. WHEN REVISED DRAWINGS AND/OR ANY REVISIONS ARE ISSUED, THE
<br />SYSTEM, AND PROVIDE ALL NECESSARY DEVICES AND COMPONENTS FOR EQUIPMENT BE PLACED IN CONTRACTOR SHALL EVALUATE THE CHANGES PROMPTLY. BEFORE INSTALLATION OF ANY ITEM OR
<br />PROPER WORKING ORDER. PERFORMANCE THE WORK INDICATED BY THE REVISED DRAWINGS OR REVISIONS, THE CONTRACTOR
<br />SHALL NOTIFY THE ARCHITECT/ENGINEER IN WRITING THAT THE REVISED DRAWINGS INVOLVE AN
<br />16.1. A SEPARATE, GREEN TYPE THW COPPER GROUND CONDUCTOR SHALL BE RUN FROM GROUND LUG OF AN ADDITION OR DEDUCTION OF A SPECIFIC AMOUNT OF MONEY TO THE CONTRACT PRICE. THE
<br />EACH GROUNDED RECEPTACLE TO AN APPROVED CONNECTION INSIDE THE ENCLOSING STEEL OUTLET CONTRACTOR SHALL NDI PROCEED WITH THE REVISED WORK WITHOUT PRIOR WRITTEN APPROVAL BY
<br />BOX. DEVICE MOUNTING SCREWS SHALL NOT BE CONSIDERED AN APPROVED GROUND. THE ARCHITECT/ENGINEER OF THE COST OF THE REVISED WORK.
<br />16.2. A SEPARATE GROUND CONDUCTOR SHALL BE INSTALLED IN EVERY CONDUIT AND RACEWAY AND 29. IF ELECTRICAL CONTRACTOR HAS QUESTIONS, OR IN THEIR OPINION FINDS OMISSIONS OR
<br />SECURELY BONDED IN AN APPROVED GROUNDING TERMINAL AT BOTH ENDS OF THE RUN. THE ERRORS ON ELECTRICAL DOCUMENTS, IT IS THEIR RESPONSIBILITY TO BRING THIS TO THE
<br />GROUNDING CONDUCTOR SHALL BE SIZED IN ACCORDANCE WITH TABLE 250-95 OF THE N.E.C. ATTENTION OF THE ELECTRICAL ENGINEER/ARCHITECT/OWNER IMMEDIATELY. IF ELECTRICAL
<br />CONTRACTOR SHALL SIZE CONDUIT TO ACCOMMODATE ADDITIONAL CONDUCTOR. CONTRACTOR PROCEEDS WITH ARY CHANGES TO THE CONTRACT DOCUMENTS WITHOUT WRITTEN
<br />PRIOR APPROVAL FROM THE ELECTRICAL ENGINEER/ARCHITECT/OWNER WILL NOT BE COMPENSATED.
<br />16.3. GROUND RODS SHALL BE 5/8" DIAMETER, TEN (10) FEET LONG COPPERCLAD STEEL OBTAIN FIVE
<br />(5) OHMS MAXIMUM RESISTANCE AS READ WITH A OHM METER, USING TWO REFERENCE RODS.
<br />IF FIVE (5) OHMS CANNOT BE ACHIEVED, CONTRACTOR SHALL PROVIDE ADDITONAL RODS, UNTIL
<br />FIVE (5) HAS BEEN OBTAINED.
<br />4ole 0/w
<br />.�.�� L��
<br />.a
<br />UL4I uu
<br />V co co
<br />cli cri
<br />00 0o
<br />00
<br />Lo
<br />O � �
<br />r r
<br />O � M
<br />co
<br />OG °
<br />a�
<br />S.. C
<br />ca °
<br />I.,_ c) m
<br />I
<br />ul
<br />4
<br />rfir-
<br />00
<br />o�
<br />.� w ��N
<br />U w
<br />O Q X
<br />E o
<br />m Za
<br />Lij .. °' .
<br />N
<br />N I N F
<br />d-
<br />41 � A co O
<br />to >.,, o
<br />CS$ o
<br />W U co UJ
<br />m _
<br />c
<br />O 0
<br />0
<br />�i N Q
<br />CSS tet-
<br />w -
<br />r
<br />o
<br />p
<br />Q
<br />E
<br />F
<br />F
<br />r
<br />O E
<br />0U-
<br />-
<br />cn =
<br />00 a
<br />N
<br />- 0
<br />0 U
<br />ry cn
<br />0 < o
<br /><C w ct
<br />- Q F
<br />o� p u0
<br />< o _
<br />t� w to
<br />BT 04 748
<br />E
<br />26 AUG 04
<br />D 0
<br />L.
<br />
|