16-17583 - Laserfiche WebLink

Browse Search

Installation Ordering Information , Do not install the G5-80, G5-56,G5-42 and G5-28 in ceilings 1. Sprinkler Model which have positive pressure in the space above. 2. Nominai Orifice • Gut a 25/"inch(67mm)diameter hole is cut in the ceiling,the 3. Flat Cover Plate � sprinkler is easily installed with the Model FC Wrench. The Plain or Perforated �lrench has a socket drive which is inserted into the body of 4. Flat Cover Plate t}ie sprinkler. When installing a sprinkler the wrench is first Assembly Finish positioned into the sprinkler/cup assembly until the wrench 5. Inlet Type socket engages the body of the sprinkler. The sprinkler is Cover Plate Finishes�'� ; tlien tightened into the pipe fitting. When inserting or remov- Standard Finishes ` �� in�g the wrench from the sprinkler/cup assembiy,care should Chrome ��W be taken to prevent damage to the sprinkler. DO NOT White Paint WRENCH ON ANY OTHER PART OF THE SPRWKLER/ Special Application C�UP ASSEMBLY. Install the cover plate by hand turning the Finishes�zJ — cover in the clockwise direction until it is tight against the ceil- Bright Brass Model FC Sprinkler Wrench �ng, Finished Bronze UL Listing Category A protective cap is provided to protect the drop-down sprinkler Black Plating Sprinklers, Automatic and deflector from damage which could occur during construction Black Paint Open before the cover plate is installed, The cap is factory installed Off White Quick Response Sprinkler inside the sprinkler cup.Remove cap to install sprinkler,then re- Satin Chrome UL Guide Number install cap until the cover plate is installed. ��> Other finishes and co�ors are VNIV Maintenance available on special order. Consult factory for details. The�Model G5-80, G5-56, G5-42 and G5-28 should be in- coverplate custom paint is spected and the sprinkler system maintained in accordance semi-gloss, unless specified with NFPA 25. Do not clean sprinklers with soap and water,am- 2 otherwise. i For the perforated style cover- monia or any other cleaning fluids. Remove any sprinkler that plate, consult factory for avail- has b�een painted (other than factory applied) or damaged in ability on these and other cus- any way. Concealed sprinklers cover plates can not be painted tom finishes, I in the field, after installation or have any other coating applied Maximum Workin Pressure other than the factory finish.A stock of spare sprinklers should g be maintained to allow quick replacement of damaged or oper- 175 psi (12 bar) ated sprinklers. Prior to instaliation,sprinklers should be main- 100% Factory tested Hydrostatically to 500 psi(34.5 bar) , tained in the original cartons and packaging to minimize the Temperature Rating poten�ial for damage to sprinklers that would cause improper operation or non-0peration. Classification Sprinkler Cover Max.Ambient Plate Temp. Ordinary 165°F/74°C 135°F/57°C 100°F/38°C Intermediate 212°F/100°C 165°F/74°C 150°F/66°C 2. I