16-17583 - Laserfiche WebLink

Browse Search

i � Cox Fire Protection Steel Pipe Submittal All of the steel pipe to be used on this project meets or exceeds the requirements of one or more of the following standards as required by Section 6.3 of NFPA 13-2010 edition: ASTM A795 Specification for Black and Hot-Dipped Zinc Coated (Galvanized) Welded and Seamless Steel Pipe for Fire Protection Use ANS /ASTM A 53 Specification for Black and Hot-Dipped Zinc Coated (Galvanized) Welded and Seamless Steel Pipe I� ASTM A 135 Specification for Electric — Resistance Welded Steel Pipe Manu�acturers may vary. As per Section 6.3.8 of NFPA 13-2010 edition, all piping shall be marked alon its len th g g to properly identify its type, schedule and manufacturing standard. Additional approvals or listings are not required when: 1. Steel pipe meeting the above referenced ASTM specifications is used and joined by welding ' or�roll-grooved pipe and fittings, the minimum nominal wall thickness for pressures up to 300 ps� shall be in accordance with Schedule 10 for sizes up to 6 inches and .188 inches for 8" — � 10�' pipe. 2. Steel pipe meeting the above referenced ASTM specifications is used and joined by th�eaded fittings, the minimum wall thickness shall be in accordance with Schedule 40 in si�es less than 8 inches for pressures up to 300 psi. Exce �tion: Pi e meetin the above referenced ASTM s ecifi P p 9 p cations with wall thickness and pressure limitations less than Schedule 40 for threading or Schedule 10 for welding and roll- groov�ng, which have been investigated for suitability in automatic sprinkler installations and ' listed �for this service, shall be permitted when installed in accordance with their UL or FM listing limitations. All steel pipin is to be installed in strict accordance with the uideline g g s of NFPA 13 and therefore requires no special submittal of specific manufacturer's installation instructions. � I i