17-18386 - Laserfiche WebLink

Browse Search

r( % � i t`�-� ` __ � s'�—f�li�fl�'�E�D 4.3 Accessorv Starter Striqs: 4.3.1 Pro-Start� Eave/Rake Starter Strip Shingles and WeatherBlocker`"" Premium Eave/Rake 5tarter 5trip Shingles are starter strips for asphalt roof shingles. � 4.3.2 QuickStartm Peel & Stick Starter Roll is a is a mineral-surfaced, fiberglass-reinforced, self-adhering SBS modified bitumen starter strip, nominal 9-inch x 33 ft roll,for use with asphalt shingles with exposure of 6- inch or less. 4.3.3 StarterMatchT"" Sharter Strip Shingles are color-coordinated starter strips for use with Grand Canyon`� and Grand Sequoiaa' series asphalt shingles. StarterMatchiM are installed as the second starter for Grand Canyon°and Grand Sequoia°series installations. 5. LIMITATIONS: 5.1 This is a building code evaluation. Neither Trinity�ERD nor Robert Nieminen, P.E. are, in any way, the � Designer of Record for any project on which this Evaluation Report, or previous versions thereof, is/was used for permitting or design guidance unless retained specifically for that purpose. 5.2 This Evaluation Report is not for use in the HVHZ. 5.3 Fire Classification is not part of this Evaluation Report; refer to current Approved Roofing Materials Directory for fire ratings of this product. 5.4 Wind Classification: 5.4.1 The GAF asphalt shingles noted in Section 4.1 are Classified in accordance with FBC Tables 1507.2.7.1 and R905.2.6.1 to ASTM D3161, Class F and/or ASTM D7158, Class H, indicating the shingles are acceptable for use in all wind zones up to V,�=150 mph (V��=194 mph). Refer to Section 6 for installation requirements to meet this wind rating. 5.4.2 The GAF hip &ridge shingles noted in Section 4.2 are Classified in accordance with FBC Tables 1507.2.7.1 and R905.2.6.1 to ASTM D3161,Class F,indicating the shingles are acceptable for use in all wind zones up to Va,d=150 mph(V�it=194 mph). Refer to Section 6 for installation requirements to meet this wind rating. 5.4.3 Classification by ASTM D7158 applies only to exposure category B or C, as deFined in FBC 1609.4.3, and a mean roof height of 60 feet or less. Calculations by a qualified design professional are required for conditions outside these limitations. Contact the shingle manufacturer for data specific to each shingle. 5.5 All products in the roof assembly shall have quality assurance audit in accordance with the Florida Building Code and F.A.C.Rule 61G20-3. 6. INSTALLATION: 6.1 Underlayment: 6.1.1 Underlayment shall be acceptable to GAF and shall hold current Florida Statewide Product Approval, or be Locally Approved per Rule 61G20-3, per FBC Sections 1507.2.3,1507.2.4 or R905.2.3. 6.2 Starter Shingles or Starter Strip: 6.2.1 Installation of Pro-Start Eave/Rake Starter Strip Shingles, WeatherBlocker Premium Eave/Rake Starter Strip Shingles and QuickStart Peel&Stick Starter Roll shall comply with the GAF current published instructions. 6.3 Asphalt Shingles: 6.3.1 Installation of asphalt shingles shall comply with the manufacturer's current published instructions, using minimum four (4) nails per shingle in accordance with FBC Sections 1507.2 or R905,2, with the following exceptions: i Camelot, Camelot II, Grand Canyon,Grand Sequoia,Grand Sequoia lR, Grand Sequoia ArmorShield,and Woodland require minimum five(5)nails per shingle. ➢ Slateline requires minimum six(6)nails per shingle. Exterior Research and Design,LLC. Evaluation Report 01506.01.08-R21 Certi�cote of Authorization 1t9503 FL10124-R19 Revision 21:08/26/2016 Page 4 of 6