17-18386 - Laserfiche WebLink

Browse Search

i ' ��"�� TAMKO BUILDING PRODCUTS, INC. �a TAMKO Underlayments TECHNICAL SERVICES, LLC TAMKOO ASTM Tile ASTM D 63B0, Class M,Type II underlayment constructed from an organic felt saturated Underlayment with asphalt then coated on both sides with asphalt and surfaced with granules. Application. The underlayment shall be installed with minimum 2" side laps and minimum 4"staggered end laps and in accordance with FRSAITRI 07230 for tile applications. Allowable roof coverings: Attachment of clay and concrete tile shall be II permitted in accordance with the FBC. TAMKOO Master ASTM D 6380, Class S,Type IV underlayment constructed from an organic felt saturated ', Smooth with asphalt then coated on both sides with asphalt and surfaced with a fine mineral. I Application: The underlayment shall be installed along the valley ', in accordance with FBC requirements. � Allowable roof coverings: Attachment of asphalt shingle valleys shall be I permitted in accordance with the FBC. � TAMKOO Moisture Self-adhered, ASTM D 1970, fiberglass reinforced, modified bitumen sheet membrane Guard PIusO with a mineral surfacing and a removable release film on the adhesive side. Application: The underlayment shall be attached by adhering � directly to the roof deck with minimum 3-1/2" side , laps and minimum 6"staggered end laps. Min.application temperature: 40�F. Allowable roof coverings: Attachment of asphalt shingles and mechanically fastened concrete and clay tile roofing shall be permitted in accordance with the FBC_ TAMKOO No.15 ASTM ASTM D 226,Type I underlayment constructed from a non-perforated organic feit that is Asphalt Saturated saturated with asphalt. Organic Felt Application: The underlayment shall be installed with minimum 2" side laps and minimum 4"end laps. , Allowable roof coverings: Attachment of asphalt shingles, metal roofing, wood shingles, wood shakes, and roll roofing shall be permitted in accordance with the FBC. TAMK00 No.15 UL ASTM D 226,Type I underlayment constructed from a non-perforated organic felt that is Asphalt Saturated saturated with asphalt. Organic Felt Application: The underlayment shall be installed with minimum 2" side laps and minimum 4"end laps. Allowable roof coverings� Attachment of asphalt shingles, metal roofing, wood shingles, wood shakes, and roll roofing shall be permitted in accordance with the FBC. TBP14001.3 FL12328-R7 Page 2 of 4 This evaluation report is provided for State of Florida product approval under Rule 61G20-3. The manufacturer shall notify CREEK Technical Services,LLC of any product changes or quality assurance changes throughout the duration for which this report is valid. This evaluation report does not express nor imply warranty, installation, recommended use, or other product attributes that are not specifically addressed herein.