17-18846 - Laserfiche WebLink

Browse Search

. . - •- SILENT SD500-PS and SD500-PSDA I�NIGHT Addressable Pull-Station � by Honeywell IntelliKnight's addressable pull stations combine fast response with pin-point location ID �, The SD500-PS and SD500-PSDA are a single action or dual action addressable manual fire alarm pull station for use with Silent KnighYs IntelliKnight fire control panel. Extremely easy to operate, the SD500-PS/PSDA provides a fast and practical means of manually initiating a fire alarm signal. The IntelliKnight panel recognizes , each manual pull station by its specific address saving precious seconds in determining the location of an alarm. The SD500-PS/PSDA mounts to a single gang box and features a rugged metal construction that lasts and lasts. Combine all this with the features you've come to expect from Silent Knight- easy installation and stable ' operation - and it adds up to a flexible solution for all your fire protection needs. Addressable Pull • Te�m��aiS - a��ept up to �4 Station gauge wire . • Extremely easy to operate SD500-PS & SD500-PSDA • Corrosion-resistant gold-plated , � The SD500-PS is a single action contacts. ' addressable fire pull station, and • Reflective label makes it easier the SD500--PSDA is a dual action to locate in low light addressable fire pull station. The Operation SD500-PS/PSDA feature rugged � metal construction A terminal strip The SD500-PS/PSDA single action on back of the pull station allows pull stations are operated by a pull interconnection of the pull station to on the front pull cover of the the SLC of an IntelliKnight control station. A plunger switch, wired to � �, � panel. The SD500-PS/PSDA is a self contained addressable , designed for indoor use in non- module, is released as the pull ' explosive environments.The station opens to initiate the alarm. normally open initiating point Once operated, the cover hangs � � contacts are gold-plated to avoid down and can be seen up to 100 ii.l� , risk of corrosion. The SD500- feet away. The pull station is reset PS/PSDA has been tested by UL by returning the front cover to the for compliance to the requirements normal upright position and SD500-PS of the Americans with Disabilities relocking the station with a reset ' ACT (ADA). key. The reset keys are the same Specifications keys used on Silent Knight Operating Voltage: 24VDC Features enclosures. • UL Listed The SD500-PS/PSDA includes a Standby Current: .55mA • CSFM listed status LED which blinks, indicating Alarm Current: .55mA • MEA(SD500-PS only) that the addressable module is Ambient Temperature: 429-92-E Vol XI communicating with the loop. The 32°F to 120° (0°C to 49°C) status LED lights continuously Mounting: Single gang box • ADA compliant during an alarm.A dip switch on PS-SMBB - Optional Red Surface • Key reset (Same key as Silent the addressable module is used to Mount Box I�I Knight enclosures) set the unique address. � • Surface mount back box P/N 350342 Rev. E available � O 2016 Honeywell International Inc