17-18932 - Laserfiche WebLink

Browse Search

� Membrane Type: SBS Deck Type 1: Wood,Non-insulated Deck Description: Minimum15/sz" or greater plywood or wood plank. Plywood shall be attached to wood supports spaced 24"o.c.using wood screws spaced 6"o.c. System Type E(1): Base sheet mechanically fastened. All General and System Limitations apply. Anchor Sheet: One ply of Tamko Glass-Base or Versa-Base fastened to the deck as described below: Fastening: (Option#1)Attach anchor sheet using 11 ga. annular ring shank nails and 1-5/8"diameter tin caps spaced 9"o.c.in a 4"lap and 9"o.c.in two staggered rows in the center of the sheet. Maximum Design Pressure:—52.5 psf, (See General Limitation#7) (Option#2)Attach anchor sheet using#12 or#14 Dekfast Fasteners with Plates or OMG Accutrac Fasteners and 3"Square Plates spaced 12"o.c.in a 4"lap and 12"o.c.in two staggered rows in the center of the sheet. Maximum Design Pressure:—60 psf, (See Genera[Limitation#7) Ply Sheet: (Optional) One or more plies of Tam-Ply N,Glass Base or Versa-Base adhered with a full mopping of approved asphalt applied within the EVT range,at a rate of 20-40 lbs./sq. Membrane: Awaplan adhered with a full mopping of approved asphalt applied at 400°F at the point of contact,at a rate of 20-401bs./sq. 5urfacing: Optional for mineral surfaced Membranes. Required for smooth surfaced membranes.Any coating,listed below,used as a surfacing,must be listed within a current NOA. 1. 4001b./sq. gravel or 3001b./sq. slag in a flood coat of approved mopping asphalt at an application rate of 601b./sq.. 2. Henry 520 or Karnak 97AF applied at 11/z gal./sq.,or Grundy Fibered Asphalt Emulsion,or Tam-Pro Fibered Emulsion at 3 gal./sq. Ma�mum Design Pressure: See Anchor Sheet Fastening Options above NOA No.: 14-0827.20 MIAMI•DADE COUNTY Expirarion Date: OS/23/17 �•••• � Approval Date: 07/28/16 Page 12 of 14