17-19173 - Laserfiche WebLink

Browse Search

. , • 1 II � , � � , � o • . . . . � � , . � . � 0 � . ��i m �� ' r�s�- �,,� �T-qq�.{�. 'PL9Ff — ,-: .� -- - - � ,..s 0' - . _ � _ k'��, �� I � _ � �r+ d I 5(IP, ;11�. 6100EL�f011 , — 3 J�Cs t. arLi.w. �.3' _ •The AGF Manufacturing Inc. Model 1011A TESTaNDRA1N�matches all the features and benefits of our Model 1000 by providing both the test function and the express drain function in a multistory installation for a wet fire sprinkler system,with the added feature of an integral Model 7000 Pressure Relief Valve with drainage piping. •The Model 1011A complies with the requirements of NFPA-13 that stipulate a pressure relief valve be installed on all gridded systems and downstream of all pressure reducing valves(see reverse). •The Model 1011A TESTaNDRA1N�is a compact single handle ball valve which includes a tamper resistant test orifice and integral tamper resistant sight glasses, and is 300 PSI rated. •Available in a full range of sizes from 3/a" to 2" NPT and BSPT, with all specifiable orifice sizes 3/e" (2.81n,'/s" (4.2f�, �/2" (5.61n, "/sz" (8.01�, 5/s" (11.2K, ELO), 3/a" (14.OK, ESFR), and K25 as required by NFPA 13, 2007 Edi- tion (see reverse). •The included UVFM Model 7000 Pressure Relief Valve features a flushing handle and is factory rated for 175 PSI. Other pressure settings are available and may be substituted. � Designed to relieve excess system pressure caused by surges or temperature changes as well as solve the dif- ficult problem of providing the relief valve with a convenient drainage-piping outlet. • Shipped with relief valve and bypass drain ports plugged to expedite pressure testing the system. •A locking kit is available and can be ordered with the valve to provide vandal resistance or prevent uninten- tional alarm activation. • Repair kits including(1)adapter gasket, (1) ball, (2)valve seats, (1)stem packing, and (1)stem washer are avail- able for all TESTaNDRA1N�valves.Valve and orifice size must be specified when ordering. NOTE:It is important to note that the pressure rating of the relief valve indicates an operating range of pressure for both opening and closing of the valve.Standard relief valves are required to OPEN in a range of pressure between 90%and•105%of their rating.The valves are required to CLOSE at a pressure above 80%of that rating.The relief valve should be installed where it is easily accessible for main- tenance.Care should be taken that the relief valve CANNOT be isolated from the system when the system is operational.A relief valve should NEVER have a shutoff valve or a plug downstream of its outlet. i � � r � � � � � r � � TESTANDRAIN Is a registered trademark of AGF Manufacturing Ina CS1011A 10/09