18-19543 - Laserfiche WebLink

Browse Search

TR "CITY ERD TABLE6B:STEEL-RECOVER SYSTEM TYPE C-2:PLATE-BONDED ROOF COVER All areas where the existing metal panels do not lay flush on the underlying puriin shall have a 0.25-inch diameterpltat hole pre-drilled Into the panel prior to driving the Pullin Fastener Into the puriin system Substrate Insulation Layer Attachment Roof Cover/Adhesive MOP(psf) No. (Note 1) Fasteners(Note 13) Spacing Existing standing g min 1 lap seam metal One or more layers,any Mule-Hide Purlin Fastener and Mule-Hide TPO-c(minimum 60-mil)bonded to roof covers having min.16 gauge 05 in.), R-7 combination, RhinoBond plate-TPO are fastened 12-inch o.c along purlins RhinoBohrl Plate-TPO with RHINOBONp tool -30.0 inch),el ksi in min.a gauge 70-In h o.36 preliminarily fastened through to purlins per manufacturers Instructions. ksi steel purlins spared max.120-inch o.c. Existing standing seam or lap seam metal One or more layers,any Mule-Hide Purlin Fastener and Mule-Hide TPO-c bonded to RhinoBond Plate- roof covers having min'16 gauge(0.0598 R-8 inch),50 ksi or min.13 gauge(0.105 in.),36 combination, RHINOBONp insulation Plate(TPO) 6-inch o.c along purlins TPO with RHIN0B0N0 tool per manufacturers -37.5 ksi steel purlins spaced max.120-inch o.c. Preliminarily fastened are fastened through to purlins instruetioits. Existing standing seam or lap seam metal Ope or more layers,any Mule-Hide Purlin Fastener and Mule-Hide TPO-c bonded to RhinoBond Plate- roof covers having min.16 gauge(0.0598 R-g inch),50 ksi or min.12 gauge(0.105 in.),36 combination, RHINOBONO Insulation Plate(TPO) 12-inch o.c.along purlins TPO withRHINOBONO tool per manufacturers 37 5 ksl steel purlins spaced max.60-Inch o.c. preliminarily fastened are fastened through to purlins Instructions. Existing standing seam or lap seam metal One or more layers,any Mule-Hide Purlin Fastener and Mule-Hide TPO-c(minimum 60-mil)bonded to roof covers having min,16 gauge(0.0598 R-10 combination, RHINOBONp Insulation Plate(TPO) 12-inch o.c,along purlins, RhlnoOond Plate-TPO with RHINOBONO tool -45.0 Inch),SO ks!or min.12 gauge(0.105 in.),36 preliminarily fastened are fastened through to purlins per manufacturers Instructions. ksi steel purlins spaced max.60-Inch o.c Existing standing seam or lap seam metal One or more layers,any Mule-Hide Purlin Fastener and Mule-Hide TPO-c(minimum 60-mil)bonded to roof covers having m1n.16 gauge(0.0598 R-11 combination, RHINOBONO insulation Plate(TPO) 6-rich o.c,along purlins RhinaBond Plate-TPO with RHINOBONp tool -52.5 inch),50 ksi or min.12 gauge(0.105 in.),36 ksi steel purlins spaced mm 120-inch o.c, preliminarily fastened are fastened through to purlins per manufacturer's instructions. Existing standing seem or lap seam metal One or more layers,any Mule-Hide Purlin fastener and Mule-Hide TPO-c bonded to RhinoBond Plate- roof covers having min.16 gauge(0.059$ R-12 combination, RHINOBONp Insulation Plate(TPO) 6-inch o.c.along purlins TPO with RHINOBOND tool per manufacturers 67.5 inch),el ksi in mpacn.e gauge(04nc in.),36 preliminarily fastened are fastened through to purlins instructions. ksi steel purlins spared max.60-inch o.c Exterior Research and Design,LLC.d/b/a Trinity ER0 Evaluation Report M35060.06.09-R4 for FL12772-R4 Certificate of Authorization#9503 FBC NON-HVW EVALUX"ON;Mute-Hide TPO-c Single Ply Roof Systems Revision 4:04/03/2017 Prepared by: Robert Nieminen,PE-59166 Mule-Hide Products Co.,Inc.;(608)365-3111 Appendix 1,Page 23 of 26