18-19545 - Laserfiche WebLink

Browse Search

TRINITY ER® TABLE 1A:WOOD DECKS—NEW CONSTRUCTION,REROOF(TEAR-OFF)oR RECOVER SYSTEM TYPE C: MECHANICALLY ATTACHED INSULATION,BONDED ROOF COVER System Deck Base insulation Layer Top Insulation Layer Roof Cover MDP No. (Note 1) Type Fasteners Attach Base Ply Primer Cap Ply (Psf) Min.15/32-inch (Optional)One or more Min.1.5-inch ACFoam 11, Soprema#12 DP Fasteners with Z SA Smooth Ply W-1 plywood at max. layers,any SOPRA-ISO s,H-Shield, Soprema 3"Metal Insulation Plates 1 per 1.6 ft 40 None SA CAP GR -67.5 24-inch spans combination,loose laid SOPRA-ISO r TABLE 113: WOOD DECKS—NEW CONSTRUCTION OR REROOF(TEAR-OFF) SYSTEM TYPE E:NON-INSULATED,MECHANICALLY ATTACHED BASE SHEET,BONDED ROOF COVER system Deck(Note 1) Base Sheet Roof Cover No. Base Fasten Attach Primer Base Primer Cap MDP(Psf) Min.7/16-inch OSB Sopra-G or 6-Inch o.c.at the 4-inch laps and 32 ga.,1-5/8-inch diameter tin caps RESISTO EXTERIOR RESISTO EXTERIOR W-2 or min.15/32-inch Modified with 11 ga.annular ring shank nails 6-inch o.c.at four(4),equally PRIMER SA BASE PRIMER SA CAP GR -37.5* plywood Sopra G spaced,staggered center rows 7-inch o.c.at the 4-inch laps and RESISTOW 3 Min.19/32-inch Sopra G with ga., ga.a inch diameter tin caps 7-inch o.c.at three(3),equally PRIMER EXTERIOR RESISTOSA BASE PRIMER EXTERIOR SA CAP GR -37.5 plywood with 31 ga.annular ring shank nails spaced,staggered center rows PRIMER PRIMER a.,1-5 p Min.15/32-inch 32 g /8-inch diameter tin caps 8-inch o.c.at the 4-inch laps and W-4 SA Nall Base 8-inch o.c.at three(3),equally None (Optional}SA None SA CAP GR -45.0 plywood with 11 ga.annular ring shank nails spaced,staggered center rows Smooth Ply 40 Min.15/32-inch OSB 6-inch o.c.at the 4-inch laps and 32 ga.,1-5/8-inch diameter tin caps RESISTO EXTERIOR SA BASE RESISTO EXTERIOR W-5 or min.15J32-inch Sopra-G with 11 ga.annular ring shank nails �6-inch o.c.at four(4j,equally PRIMER PRIMER SA CAP GR -45.0 plywood spaced,staggered center rows Min.19/32-inch 32 ga.,1-5/8-inch diameter tin caps 8-inch o.c.at the 4-inch laps and (Optional)SA W-6 plywood SA Nail Base with 11 ga.annular ring shank nails 8-inch o.c.at three(3),equally None Smooth Ply 40 None SA CAP GR -60.0 spaced center rows Min.19/32-inch 32 ga.,1-5/8-inch diameter tin caps 6-inch o.c.at the 4-inch laps and W-7 SA Nail Base with 0.120"x 1.25"ring shank 6-inch o.c.at three(3),equally None (Optional)SA None SA CAP GR -90.0 plywood roofing nails spaced center rows Smooth Ply 40 Min.19/32-inch 32 ga.,1-5/8-inch diameter tin caps 4-inch o.c.at the 4-inch laps and W-8 SA Nail Base with 0.120"x 1.25"ring shank 4-inch o.c.at four(3),equally None (Optional)SA None SA CAP GR -105.0 plywood roofing nails spaced center rows Smooth Ply 40 Min.19/32-inch Trufast#12 DP with Trufast 3"Metal 8-inch o.c.at the 4-inch laps and (Optional)SA W 9 plywood SA Nail Base Insulation Plates 8-inch o.c.at three(3),equally None Smooth Ply 40 None SA CAP GR -127.5 spaced center rows Exterior Research and Design,LLC.d/b/a Trinity)ERD Evaluation Report 7215.06.14-R6 for FL17084-116 Certificate of Authorization#9503 6'EDITION(2017)FBC NON-HVHZ EVALUATION Revision 6:10/10/2017 Prepared by: Robert Nieminen,PE-59166 RESISTO,a division of Soprema,Inc.;(819)478-2400 Appendix 1,Page 2 of 3