Laserfiche WebLink
ti <br /> Page 3 of 7 <br /> MICROMATIC° STANDARD <br /> 0 RESPONSE PENDENT <br /> SPRINKLER VK102 (K5.6) <br /> The Viking Corporation,210 N Industrial Park Drive, Hastings MI 49058 <br /> Telephone: 269-945-9501 Technical Services: 877-384-5464 Fax: 269-818-1680 Email:techsvcs@vikingcorp.com <br /> Visit the Viking website for the latest edition of this technical data page www.vikinggroupinc.com <br /> TABLE 1:AVAIL4BLE SPRINKLER TEMPERATURE RATINGS ■ FINISHES <br /> Sprinkler Temperature ; ,!Sprinkler Nominal;'; Maximum Ambient`. <br /> Bulb.Color <br /> Classification Tempeerature Rating?. Ceiling Temperature2 <br /> .e <br /> Ordinary 135 °F(57°C) 100°F(38 °C) Orange <br /> Ordinary 155 °F(68°C) 100°F(38 °C) Red <br /> Intermediate 175 °F(79°C) 150°F(65°C) Yellow <br /> Intermediate 200°F (93 °C) 150°F (65 °C) Green <br /> High 286°F (141 °C) 225°F (107 °C) Blue <br /> Extra High 360°F(182°C) 300°F (149 °C) Mauve <br /> Ultra High3 500 °F (260 °C) 465 °F (240 °C) Black <br /> Sprinkler Finishes: Brass, Chrome, White Polyester, Black Polyester, and ENT <br /> Corrosion-Resistant Coatings4: White Polyester and Black Polyester in all temperature ratings. ENT in all temperature ratings ex- <br /> cept 135°F (57 °C). Wax-Coated Brass and Wax over Polyesters for sprinklers with the following temperature ratings: <br /> 155°F (68 °C) Lt. Brown Wax 175 °F(79 °C) Brown Wax 200 °F(93°C) Brown Wax <br /> 212°F (100 °C) Dk. Brown Wax' 286 °F(141 °C) Dk. Brown Wax' <br /> Footnotes <br /> 'The sprinkler temperature rating is stamped on the deflector. <br /> 2 Based on NFPA-13.Other limits may apply,depending on fire loading,sprinkler location,and other requirements of the Authority Having Jurisdiction. <br /> Refer to specific installation standards. <br /> 3 Sprinklers of Ultra-High temperature rating are intended for use inside ovens,dryers,or similar enclosures with normal operating temperatures above <br /> 300°F(149°C).Where the ambient temperature around the Ultra-High temperature rated sprinkler is significantly reduced below 300°F(149°C), <br /> response time may be severely retarded. <br /> 4 The corrosion-resistant coatings have passed the standard corrosion test required by the approving agencies indicated in the Approval Charts.These <br /> tests cannot and do not represent all possible corrosive environments. Prior to installation, verify through the end-user that the coatings are com- <br /> patible with or suitable for the proposed environment. For automatic sprinklers,the coatings indicated are applied to the exposed exterior surfaces <br /> only.Note that the spring is exposed on sprinklers with Polyester and ENT coatings.For ENT coated automatic sprinklers,the waterway is coated. <br /> 5 Wax melting point is 170°F(76°C)for 212°F(100°C)and 286°F(141 °C)temperature rated sprinklers. <br /> Protective Sprinkler %Wrench Flat <br /> clip <br /> t <br /> Protective Sprinkler <br /> Cap <br /> Ti <br /> Figure 1: Standard Sprinkler Wrench 10896W/13 <br /> Form No. F_031414 17.08.31 Rev 17.1 <br />