|
EiCHNI A
<br /> KALT, 74
<br /> INN
<br /> 3 O
<br /> PROFESSIONAL
<br /> 30() GRADE POLYURETHANE SEALANT
<br /> 1. PRODUCT NAME: Grade:Gun grade consistency
<br /> 33000 Professional
<br /> Grade Polyurethane Sealant Primer:Not required on most
<br /> surfaces
<br /> 2.MANUFACTURER:Geocel Products Group g'
<br /> Packa9 fn 10.111.oz.cartridges
<br /> Colors:White,
<br /> A Business Unit of � gray,limestone,
<br /> The Sherwin-Williams Company bronze,medium bronze,tan,
<br /> aluminum gray,black,and
<br /> ("Geocel Products Group")
<br /> redwood tan
<br /> Cleveland,OH 44115 Application Standards: Meets
<br /> Phone:(800)348-7615 ASTM C 920 Type S,Grade NS,Class
<br /> Fax:(800)348-7009 25,Use NT,A,M,G,and 0;Meets
<br /> www.GeocelUSA.com Federal Specification TT S-0230 C,
<br /> 0f`' . Type II,Class A;Meets Canadian
<br /> 3. PRODUCT DESCRIPTION: Specification CAN/CGSB-19.13-M87
<br /> Polyurethane
<br /> Professional Grade
<br /> Sealant is a single F Class 2 Non-sag,Class 25,Class M.
<br /> component,high performance f� � Limitations:
<br /> polyurethane sealant that withstands •Do not apply over damp or
<br /> extreme weather conditions and cures RET"JE contaminated surfaces
<br /> Iirt40o Fnor•Esoxil
<br /> to a flexible weatherproof seal. R nE P •Do not apply to absorptive
<br /> Product Benefits: surfaces such as marble,
<br /> •Withstands extreme weather conditions °,yr limestone,or granite without prior
<br /> •Meets ASTM C 920 + 3 testing for discoloration or staining
<br /> •Moisture cure
<br /> •Flexible 4. INS T ALLATION:
<br /> •Minimal shrinkage Joint Design:The width of the joint
<br /> •Non-sag formula should be a minimum of 4 times the
<br /> •Primerless adhesion on most surfaces anticipated movement.In joints up to
<br /> •Paintable,non-corrosive 1/2"wide,the depth of the sealant
<br /> •Contains no TDI(toluene diisocyanate) should be equal to the width,but not
<br /> less than 1/4". In joints wider than
<br /> Basic Uses:3300 Sealant can be 1/2",the depth should be maintained
<br /> used in roofing applications such as , at 5/8".Lap shear joints should have a
<br /> concrete roofing tile,clay roofing tile, width of at least twice the anticipated
<br /> metal roofing, Kynar 5009 coated movement.
<br /> metal,and composition shingles. Surface Preparation:Joints to
<br /> Other applications include building receive sealant must be sound,
<br /> lath paper repair,gutters, seamVAC, Adheres To:Mason ceramics,wood, smooth,uniform in dimensions,and
<br /> flashing,skylights,roofing seams, Masonry,
<br /> roofing pra)'ectlons,termination steel,Kynar 50W1,aluminum,asphalt free from defects and foreign material.
<br /> points,and vents. shingles,building paper,BUR,concrete, They must be clean,dry,and free of
<br /> fiberglass,and other common building frost and all contaminants,such as
<br /> substrates. curing compounds,sealers
<br /> (waterproofing),coatings,etc.Sealant
<br /> THERE 15 A DIFFERENCE g
<br /> o Wye
<br /> FIGURE 2 FIGURE 3 s
<br /> FIGURE i LSILICCI�N
<br /> HANE
<br /> Proper Depth Control Joints without Bond Breaker Joints with Bond Breaker • • •
<br /> The effects on the sealant with and without bond breakers are illustrated in Figures Two and Three.
<br /> Kynar 5OV is a registered trademark of Arkema Inc.
<br />
|