Laserfiche WebLink
SimplemiGrinnell sE sAr-E <br /> ATyco International Company <br /> Technical Installer Support <br /> (TIS) <br /> TIS is designed to make-the expertise of a Simplex technician available at key,scheduled times <br /> during the project. This service is available during normal Simplex working hours, if scheduled <br /> five working days in advance. <br /> TIS includes the following activities by a factory-trained technician,when determined by Simplex <br /> to be appropriate. <br /> Pre-construction review of submittals and drawings With the installer. <br /> Technical advice during initial start up of control panels(including transponders) before installer <br /> wiring is connected. <br /> Review of panel wiring,and preparation of a list of any items to be corrected by the installer. <br /> Initial programming of control equipment. <br /> Program editing to correct minor errors and omissions. <br /> Assistance with one complete,functional test of the system. <br /> One training session for the owner's representative. <br /> Additional installation support may be purchased from Simplex. <br /> TIS contributes significantly to the installation of Simplex equipment but does not alleviate the <br /> installer's responsibility to: <br /> Provide skilled labor and supervision to complete the project. <br /> Review and understand Simplex instructions for installing and testing Simplex equipment. <br /> Potential problems can be avoided by adhering to the following: <br /> Do not initially start up the system,except in the presence of a Simplex technician. Simplex <br /> assumes no liability for damaged equipment,and warranty may be voided.it this procedure is <br /> not'followed. <br /> Do not install smoke.detectors(unless protected by plastic bags)until final construction clean up <br /> has occurred. This prevents damage caused by dust;dirt,and paint. Detectors installed prior to <br /> clean up may requite disassemble,cleaning,or replacement which is not covered by warranty. <br /> Care.must be taken to protect:equipment during the installation and warranty period. Failures <br /> -due to external causes(lighting surges,construction dust,water damage,etc.)will be repaired.by <br />