|
13.SlmpleX Tru.eAlere Multi-Candela Notification Appliances
<br /> UL, ULC, CSFM Listed, FM Approved; Visible Notification Appliances with Synchronized Flash;
<br /> MEA (NYC)Acceptance* Non-Addressable, SmartSynCTM Operation Compatible
<br /> rsimpl-x
<br /> Visible only(V/O) 24 VDC notification appliances
<br /> with high output xenon strobe, available for wall
<br /> or ceiling mount:
<br /> • Intensity is selectable as 15,30,75,or 110 candela with
<br /> visible selection jumper secured behind strobe housing � �
<br /> o Operation is compatible with ADA requirements(refer ,. —
<br /> to important installation information on page 3)
<br /> o Polarized input allows connection to compatible reverse U
<br /> polarity,supervised notification appliance circuit(NAC)
<br /> o Regulated circuit design ensures consistent flash output Wall Mount Strobes
<br /> and provides controlled inrush current
<br /> o Rugged,high impact,flame retardant thermoplastic _ r�_ — _ ( F 8 R E I
<br /> housings are available in red or white with clear lens
<br /> m Listed to UL 1971 and ULC S526
<br /> Strobes provide synchronized flash for use with:
<br /> © 4006,4008,4010,and 410OU Series fire alarm control Ceiling Mount Strobes
<br /> panels with NACs selected to provide strobe
<br /> synchronization or SmartSync two-wire Control" � - � •
<br /> 4009 IDNetTM NAC Extenders Multi-Candela TrueAlert synchronized strobes
<br /> o Separate strobe Synchronization Modules that are provide convenient installation to standard electrical
<br /> available for Class B or Class A operation boxes.The enclosure designs are both impact and vandal
<br /> o Separate SmartSync Control Modules(SCMs)that resistant and provide a convenient strobe intensity
<br /> provide Class B or Class A output from conventional selection.Since each model can be selected for intensity
<br /> NAC inputs output,on-site model inventory is minimized and changes
<br /> encountered during construction can be easily
<br /> Strobe housings provides flexible, easy, and accommodated.
<br /> convenient semi-flush or surface wall mounting: Wall mount strobe housings are a one-piece assembly
<br /> • Rear of housing does not extend into box (including lens)that mounts to a single or double gang,or
<br /> m Wall mount strobes easily mount to single gang,double 4"square standard electrical box.The cover can be
<br /> gang,or 4-inch square outlet box quickly removed(a tool is required)and covers are
<br /> • Ceiling mount strobes mount to single gang boxes available separately for color conversion.
<br /> Wall mount strobe features: Ceiling mount strobes install using standard single gang
<br /> electrical boxes. Color choice is determined by model
<br /> • Wiring terminals are accessible from the front of the number.
<br /> housing providing easy access for installation,
<br /> inspection,and testing • • - •
<br /> * Covers are available separately to convert housing color During'installation,a selection plug at the back of the
<br /> Optional adapters and wire guards: housing determines the desired strobe intensity.An
<br /> attached flag with black letters on a highly visible yellow
<br /> © Wall mount strobe adapters are available to cover background allows the selected intensity to be seen at the
<br /> surface mounted electrical boxes and to adapt to side of the strobe lens.
<br /> Simplex®2975-9145 boxes
<br /> . .- . .
<br /> • UL listed red wire guards are available for wall or
<br /> ceiling mount strobes* Proper selection of visible notification is dependent on
<br /> occupancy,location,local codes,and proper applications
<br /> o£.the National Fire Alarm Code(NFPA 72),ANSI
<br /> Refer to page 2 for guard listing.This product has been approved by the California State A117.1;the appropriate model building code:BOCA•,
<br /> Fire Marshal(CSFM)pursuant to Section 13144.1 of the California Health and Safety
<br /> Code.See CSFM Listing 7125-0026:316 for allowable values and/or conditions concerning ICBO,or SBCCI;and the application guidelines of the
<br /> material presented in this document.It is subject to re-examination,revision,and possible Americans with Disabilities Act(ADA).
<br /> cancellation.Refer to page 2 for listing status of wire guards.Additional listings may be-
<br /> applicable;contact your local Simplex product supplier for the latest status.Listings and Simplex multi-candelaSmartSync two-wire hom/strobe appliance operation is protected
<br /> approvals under Simplex Time Recorder Co.are the property of Tyco Safely Products under one or more of the following U.S.Patent Numbers:5,559,492;5,622,427;5,865,527;
<br /> Westminster. 5,886,620;6,281,789;6,954,137;7,005,971;and 7,006,003.
<br /> S4906-0001-4 9/2009
<br />
|