18-20357 - Laserfiche WebLink

Browse Search

SILENT Farenhyt KNIGHT by Honeywell Intelligent Fire Alarm Control Intelligent Fire Alarm Control Panel Agency Listings r IFP-50 M EA IFP-50 is an intelligent analog/addressable fire control panel (FACP). J` '.. 429-92-E Vol.XVI IFP-50 has a single line circuit(SLC) loop for connecting addressable detectors and modules and has two notification appliance circuits that can be programmed for notification outputs or auxiliary power. IFP-50 also has a built-in dual line digital fire communicator, Form C trouble relay, and two programmable Form C relays.The firmware has powerful features such as detector sensitivity, day/night thresholds, drift compensation and pre-trouble maintenance alert. IFP-50 supports a variety of other devices that can be added to the system such as RA-100 or RA-1000 remote annunciator, 5824 serial/parallel printer interface module(for printing system reports), and 5496 intelligent power module, and SD or IDP devices. Features • Built-in support for up to 50 SD devices or 50 IDP detectors and 50 IDP modules • Uses standard wire—no shielded or twisted pair required • Built-in digital communicator for remote reporting of system activity and system programming • Central station reporting by point or by zone • Jumpstart®auto-programming • Supports Class B (Style 4)and Class A(Style 6 or Style 7) configuration for SLC IFP-50 • Distributed, intelligent power • 2.5 amp power supply and maximum charging • Built-in synchronization for appliances from AMSECO, Gentex@, capacity of 35 amp hours(An additional cabinet Faraday, System Sensor®, and Wheelock® enclosure is required for batteries in excess of 7 • Sensor sensitivity settings and day/night sensitivity setting and amp hours). automatic drift compensation • Programmable date setting for Daylight Saving • Notification circuits can be configured as 1 Class A(Style Z), 2 Class Time B(Style Y), or auxiliary power for resettable, constant, or door holder Compatibility power • Built-in annunciator with a backlit 80-character LCD the same display The same p SLC supports multiple device types of protocol: • RS-485 bus provides communication to system accessories • SD • Built-in RS-232 interface for programming via PC • IDP • Built-in Form C trouble relay rated at 2.5 amps at 24 VDC You cannot mix SD and IDP devices on a FACP. • Two built-in Form C programmable relays rated at 2.5 amps at 24 However, any combination of addressable devices VDC of the same protocol can be used on the IFP-50. • SLC device locator can be used to locate a single or multiple devices on a SLC loop Specifications • System automatically performs detector sensitivity test Physical • 13 preset notification cadence patterns(including ANSI 3.41)and Dimensions: 12.75"W x 15.2"H x 3.4"D four user programmable patterns (36.8 W x 62.9 H x 9.8 D cm) • Upload or download programming, event history, or detector status onslte or from a remote location using a PC and 5650/5651 Silent Weight: 11.5 lbs. (5.2 kg) Knight Software Suite(SKSS) Color: Red • Improvements in SKSS deliver five times faster upload/downloads • Non volatile event history stores up to 1000 events • 125 software zones and 125 output groups P/N 350328 Rev J ©2014 Honeywell International Inc.