17-18702 - Laserfiche WebLink

Browse Search

Engineering Specifications Synchronization is possible when using the Siemens DSC sync modules, FS-250 panel, XLS panel, or PAD-3 power The chime appliances shall be Siemens Series CH supply with built-in sync protocol. The strobes shall not drift Chimes and the chime strobe appliances shall be Sie- out of synchronization at any time during operation. If the mens Series CH Chime Strobes or approved equals. sync module or Power Supply fails to operate, (i.e., contacts The chime shall be UL Listed under Standard 464 for remain closed), the strobe shall revert to a non-synchronized Audible Signal Appliances and chimes equipped with flash rate. strobes shall be listed under UL Standard 1971 for Emergency Devices for the Hearing-Impaired. In addi- The chime and the chime strobe appliances shall be de- tion, the strobes shall be certified to meet the require- signed for indoor surface or flush mounting. The chime and ments of FCC Part 15, Class B and shall incorporate low chime strobe shall incorporate a chime mounting plate with a temperature compensation to ensure the lowest possible grille cover which is secured with two screws for a level, fin- current consumption. ish and shall mount to standard electrical hardware requiring All chimes shall use solid state components and shall no additional trimplate or adapter. provide field selectable single stroke or vibrating opera- All notification appliances shall be listed for"Special Applica- tion with volume control and tone control.All models tions". shall have a peak anechoic sound output of 83 dB at 10 General Notes: feet and an adjustable frequency range of 800 to 1200 Hz.All inputs shall employ terminals that accept#12 to Strobes are designed to flash at 1 flash per second mini- #18 AWG wire sizes. mum over their"Regulated Input Voltage Range". Note The strobe portion of the appliance shall produce a flash that NFPA-72 specifies a flash rate of 1 to 2 flashes per rate of one (1)flash per second over the Regulated second and ADA Guidelines specify a flash rate of 1 to 3 Input Voltage Range and shall incorporate a Xenon flashes per second. flashtube enclosed in a rugged Lexan®lens. The strobe All candela ratings represent minimum effective Strobe shall be of low current design. Where Multi-Candela intensity based on UL Standard 1971. Chime Strobes are specified,the strobe intensity shall have field selectable settings and shall be rated per UL Standard 1971 at: 15/30/75/110cd for wall mount and Technical Information: 15/30/75/95cd or 115/177cd for ceiling mount. The selec- tor switch for selecting the candela shall be tamper resis- For complete technical information, please consult the rel- tant and not accessible from the front of the appliance. evant installation sheets as well as the Siemens Compatibility Guide. Ordering Information / Mounting Requirements /Approvals Model Number Order Code Mounting Agency Approvals Options— UL UCL CSFM FM CH-MC-R 500-636017 PQ,R,U,Y X # # # CH-MC-W 500-636018 PQ,R,U,Y X # # # CH-MC-CR 500-636021 Q,U X # # # CH-MC-CW 500-636022 Q,U X # # # CH-HMC-CW 500-636023 Q,U X # # # CH-R 500-636019 PQ,R,U,Y X # # # CH-W 500-636020 PQ,R,U,Y X # # # CH-CW 500-636024 Q,U X # # # X= listed/approved #= pending *= Refer to Data Sheet#2585 for mounting options. WARNING: PLEASE READ THESE SPECIFICATIONS AND INSTALLATION INSTRUCTIONS CAREFULLY BEFORE USING, SPECIFYING OR APPLYING THIS PRODUCT. FAILURE TO COMPLY WITH ANY OF THESE INSTRUCTIONS, CAUTIONS AND WARNINGS COULD RESULT IN IMPROPER APPLICATION, INSTALLATION AND/OR OPERATION OF THESE PRODUCTS IN AN EMERGENCY SITUATION, WHICH COULD RESULT IN PROPERTY DAMAGE, AND SERIOUS INJURY OR DEATH TO YOU AND/OR OTHERS. Fire Safety Fire Safety 8 Fernwood Road 2 Kenview Boulevard Florham Park,NJ 07932 7/07 Brampton,Ontario Tel:(973)593-2600 5M Canada L6T 5E4 Siemens Building Technologies FAX:(973)593-6670 SFS-IG Tel:(905)799-9937 July 2007 Fire Safety Website:www.sbt.siemens.com/fis Printed in U.S.A. FAX:(905)799-9858 New Issue