Laserfiche WebLink
Insulated Cover Installation Guide <br /> 9.Final Sealing Procedures <br /> A. Due to the advanced design of the Snap-N- <br /> Lock"panel,it is almost impossible for the <br /> panel seams to leak. As in any aluminum roof louse <br /> structure,the most critical point is where the <br /> header meets the support wall. For best results Drip Edge <br /> counterflashing should be used. If structure <br /> has no drip edge,use a flexible flashing such as <br /> "L"shaped brakeform <br /> Flex-Seal. <br /> B. To insure a water tight seam,caulk under edge counterflashing tucked <br /> behind drip edge. <br /> of counterflashing that rests on roof and secure °'Pane d Caulk and <br /> with a#8 x 1/2"screw at 6"intervals. ° ° ° ° <br /> secure in front. <br /> C. Use Pro Seal 7500 to seal exposed screws <br /> and bolt heads. Make sure to completely <br /> cover the washers,because of the depression <br /> formed when tightening the panels down. <br /> Water can sit around the washers and create a <br /> problem. Apply caulking along all roof panel Huse <br /> connections to existing structure. <br /> Optional Upgrade:Provide the homeowner a Drip <br /> more long-term, low-maintenance solution to Edge <br /> leaks,by also covering panel connections at "L"shaped brakeform <br /> header,fascia and gutter; and panel seams with counterflashing tucked <br /> Flex-Seal. The tape remains flexible,while behind drip edge. <br /> moving with the varying metals of the panel Caulk and secure <br /> and extrusion as they expand and contract. No in front. <br /> fishmouths will form and the bond will remain 0 <br /> unaffected. The aluminum backing provides ° Parle! <br /> J°t`Ot Jt o J t `tt e <br /> superior UV protection. It also enables the tape <br /> to conform to irregular surfaces for a weather- <br /> tight seal. <br /> Mobile Home <br /> Drip Edge <br /> 1 <br /> "L"shaped brakeform <br /> counterflashing <br /> -,Pane tucked behind drip <br /> ° edge. Caulk and <br /> secure in front. <br /> -7- <br />