Laserfiche WebLink
O <br /> TRINITY ERQ . <br /> TABLE IA: WOOD DECKS-NEW CONSTRUCTION,REROOF(Tear-Off)or RECOVER <br /> SYSTEM TYPE C:MECHANICALLY ATTACHED INSULATION,BONDED ROOF COVER <br /> System Deck Top insulation Layer MDP <br /> No. Base Insulation Layer Roof Cover/Adhesive <br /> (See Note 1) Type Fasteners Attach (psf) <br /> Min.1.5-inch Poly 1501,H- <br /> (Optional)One or more layers,any Shield,ACFoam II,Poly ISO 2 or See Note 2 1 per 2 ft2 Mule-Hide TPO-c/W88A 2 45.0• <br /> combination,loose laid Mule-Hide TPO c Bonding Adhesive <br /> ENRGY 3 <br /> TABLE 15:WOOD DECKS—NEW CONSTRUCTION,REROOF(Tear-Off)or RECOVER <br /> SYSTEM TYPE D: INSULATED,MECHANICALLY ATTACHED ROOF COVER <br /> insulation Layer <br /> System Roof Deck (See Note 14) Roof Cover Mpp <br /> No. (per <br /> Type Attach Membrane Fasteners Spacing <br /> Min.19/32-inch plywood or wood plank at <br /> W 2 max.24"spans attached using 8d ring shank One or more layers, Preliminarily Mule-Hide Mule-Hide EHD Fasteners and 2.4 6-inch o.c.within 5.5-inch wide laps spaced 90.5-inch .52.5 <br /> nails spaced 6"o.c.in the field and#10 ring any combination attached TPO-c Seam Plates o.c. Outside of lap seated with 1.5-Inch heat-weld <br /> shank nails spaced 4"o.c.at the perimeter <br /> Min.19/32-inch plywood or wood plank at <br /> W 3 max.24"spans attached using 8d ring shank One or more layers, Preliminarily Mule-Hide Mule-Hide EHD Fasteners and 2.4 6-inch o.c.within 5.5-Inch wide laps spaced 66.5-inch -67.5 <br /> nails spaced 6"o.c.in the field and N10 ring any combination attached TPO-c Seam Plates o.c. Outside of lap sealed with 1.5-inch heat-weld <br /> shank nails spaced 4"o.c.at the perimeter <br /> 6-inch o.c.within 5-inch wide laps spaced 67-inch o.c. <br /> Min.23/32-inch OSB at max.24-Inch spans Outside of lap sealed with 1.5-inch heat-weld <br /> W-4 attached using 8d ring shank nails spaced 6" One or more layers, Preliminarily Mule-Hide Mule-Hide EHD Fasteners and 2.4 and -67.5 <br /> o.c.in the field and W o.c.at intermediate any combination attached TPO-c Seam Plates 6-inch o.c.in one row centered between the laps. <br /> supports Center row covered with 6-Inch wide cover strip <br /> seated with 1.5-Inch heat weld at all edges <br /> Exterior Research and Design,LLC.d/b/a Trinity l ERD Evaluation Report M15060.06.09-R3 for FL12772-R3 <br /> Certificate of Authorization 09503 Revision 3:03/18/2015 <br /> Prepared by: Robert Nieminen,PE-59166 Appendix 1,Page 3 of 18 <br />