Laserfiche WebLink
. 7 , <br /> Above Ground Pool Code <br /> 10 ft setbacks required <br /> R4501;17.171 <br /> The top of the barrier shall_beat least 48 inches (1219 mm) above grade, measured on the side of <br /> the barrier which faces away from the swimming pool. The maximum vertical.clearance between <br /> grade and the bottom of the barrier shall be 2 inches (51 mm) measured on the side of the barrier <br /> which-faces away from the swimming pool.Where the top of the pool structure is above grade, the <br /> barrier maybe at ground level or mounted on top of the pool structure.Where the barrier is,mounted <br /> on top of the pool structure, the maximum vertical clearance between the top of the pool structure <br /> and the bottom of the barrier shall be 4 inches (102 mm.); <br /> R4501:17.1.2 <br /> The barrier may riot have any gaps, openings, indentations, protrusions, or structural components <br /> that could allow a young child to crawl under, squeeze through, or climb over the barrier as herein <br /> described below.One end of a removable.child barrier shall not be removable without the aid of <br /> tools. Openings in any barrier shall not allow passage of a 4-inch-diameter(102 mm) sphere. <br /> R450:1.17;1:3 <br /> Solid barriers which do not have openings shall not contain indentations or protrusions except for <br /> normal construction tolerances grid tooled masonry.joints. <br /> .R4501.17.1.4 <br /> Where the barrier is composed of horizontal and vertical members and the distance between the <br /> tops of the horizontal members is less than 45 inches (1143 mm), the horizontal members shall be - <br /> located on the swimming pool.side of the fence. Spacing between vertical members shall not exceed <br /> 1 3/4 inches(44 mm' ) in width.Where there are decorative cutouts within vertical'members, spacing <br /> within the cutouts shall not exceed 1 3/4 inches (44 mm) in width. <br /> R4501.17.1.5 <br /> Where'the barrier is composed.of horizontal and vertical members and the.distance between the <br /> tops -of.the horizontal members is 45 inches (11.43 mm)or more, spacing between vertical members <br /> shall not exceed 4 inches(102 mm).Where there are decorative cutouts within vertical members, <br /> spacing within the cutouts shall not exceed 1 3/a inches(44 Mrin) in width. <br /> R4501.17.1.6 <br /> Maximum mesh size for chain link fences shall be a 21/4 inch square (5.7 mm) unless the fence-is <br /> provided,with slats fastened at the top or bottom which reduce the openings to no more than 1 3/4. <br /> inches (4.4 mm): <br /> R4501 i 17A I <br /> Where the barrier is composed of diagonal members, the maximum opening formed by the diagonal <br /> members shall be no more than 13/4 inches (44 mm). <br /> R4501.17.1.8 <br /> Access gates, when provided, shall be self closing and shall comply with the requirements of <br /> Sections R450.1.17.1.1 through R4501.17.1.7 and shall be equipped.with a self-latching locking <br /> device located on the pool side of the gate.Where the device release is-located no less than 54 <br /> inches (1372 rrim)from the bottom of the gate, the device release mechanism may be located,on <br />