19-20856 - Laserfiche WebLink

Browse Search

Residential Pools- E4203.1 Receptacle outlets. Receptacles outlets shall be installed and located in accordance with Sections.E4203..1.1 .through. E4203.1.5: Distances shall be measured as the,shortest.path that an appliance supply cord connected to the:receptacle would follow without penetrating a floor, wall, ceiling, doorway with hinged or sliding door,window opening,'or other effective permanent barrier. [680.22(A)(5)] E4203.1.2Where required. At least one 125:-volt, 15-or 20.=ampere receptacle supplied by a general-purpose branch circuit shall be' located a.miriimum of 6 feet 1829 mm from and not.more than 20 feet 6096 nim .:from theJnside wall of pools and outdoor spas and hot tubs. This, receptacle shall be.located not more than 6 feet;:6 inches (1981 mm) above the floor, .platform or grade level serving the pool, spa or hot -tub. [680.22(A)(1)] R4501.17Residential'swim nil ng barrier requirement. Residential swimming.pools shall comply with Sections R4,501.17.1 through R450.1.17.3. . Exception: A swimming pool with an approved safety pool cover complying with.ASTM F134.6. 11450147.1Outdoor swimming pools. Outdoor swimming pools shall be provided with a barrier complying with R4501.17.1.1 through R4501 A-1.1.14. R450.1.17.1-1 The top.of the barrier shall be.at least 48 inches (1219 mm) above grade measured on the side of the.barrier which faces away from the swimming pool. The maximum vertical clearance between grade and the bottom of the barrier shall be 2 inches (51 mm).measured on the side of the barrier which faces away from the swimming pool. Where the top of the pool structure is.above grade the barrier may be at. ground level or mounted on top of the pool structure. Where the barrier is mounted on top:of the pool structure, the-maximum vertical clearance between the top of the pool structure and the bottom of the barrier shall be 4:inches (102 MM'): R4501.17.1.2 The barrier may not have.any gaps, openings;indentations, protrusions, or structural components that could allow a young child to crawl under, squeeze through;.or climb.over the barrier as herein described.below. One end of a removable child barrier shall not be removable without the aid.of' tools: Openings in any barrier shall not allow passage of'a 44iichi.diameter.(102 mm) sphere. R4501:17.1.3 Solid barriers which do not have openings shall not contain indentations or protrusions except for normal construction tolerances and tooled masonry-joints., R450.1.17-1.4 Where the barrier is composed of horizontal and-vertical members and the distance between.the tops of.the horizontal members is less than 45 inches (1143 mm),the.horizontal members shall be located on the swimming pool side of the fence. Spacing between vertical members shall not exceed 11,inches (44 mm) in width:Where there are decorative cutouts within veftical members, spacing within the cutouts.shall not exceed 1 inches.(44 mm) in width: R4501.17.1:5 Where the barrier is composed of hori2ontal and vertical members and the distance between the tops of the horizontal members is 45 inches(1143 mm)or more;spacing between vertical members