19-21503 - Laserfiche WebLink

Browse Search

SECTION 23 00 00—HEATING, VENTILATING,AND AIR CONDITIONING (HVAC) PART 1 -GENERAL 1.1 RELATED DOCUMENTS A. The Bidding Requirements and Contractual Conditions set forth in Division 01 apply to this section. B. Examine other sections of the Project Manual for requirements which affect work of this section whether or not such work is specifically mentioned in this section. C. Bidders of work in Sections under Division 23 are expected to have read these requirements and, upon subcontracting work called for in such Sections, shall be responsible for compliance with such Sections. 1.2 REQUIREMENTS OF REGULATORY AGENCIES A. All work under Division 23 shall comply with the codes and standards as listed on the project drawings. 1.3 DEFINITIONS A. Technical Definitions: 1. "Piping" shall mean pipe, fittings, flanges, valves, controls, hangers, traps, drains, insulation, vents and items customarily required in connection with the transfer of fluids. 2. "Concealed" shall mean embedded in masonry or other construction, installed within or behind wall furring, within double partitions or hung ceilings, in attics, in crawl spaces, in chases, in shafts, buried in trenches, etc. 3. "Exposed"shall mean not concealed. 4. "Demolition" shall be the removal of any existing equipment, and the capping or plugging or any existing services to that equipment. Adjacent surfaces shall be restored to existing conditions and adjacent surfaces. 5. "Furnish" means to purchase and deliver products and equipment to the project site and prepare for installation. 6. "Install' means to assemble, erect, place, anchor and connect furnished products into satisfactory operation. 7. "Provide"means to furnish and install. 8. "Contract Documents" shall include the written Project Manual and the Drawings. 9. Divisions 21, 22 and 23 are the new CSI divisions replacing the old Division 15 nomenclature. They shall be hereby defined as interchangeable. 10. Division 26 is the new CSI division replacing the old Division 16 nomenclature. They shall be hereby defined as interchangeable. 1.4 QUALITY ASSURANCE A. Standards: Certain standard materials and installation requirements are described by reference to standard specifications. These standards include the following: ASTM -American Society for Testing Materials ASME-American Society of Mechanical Engineers NFPA- National Fire Protection Association NEMA- National Electrical Manufacturers Association UL-Underwriters Laboratories CEA#18010 HEATING, VENTILATING AND AIR CONDITIONING (HVAC) 23 00 00-1 COPYRIGHT©2018 CONSULTING ENGINEERING ASSOCIATES, INC.