Laserfiche WebLink
f c <br /> ROC K-IT CLIP .S S i n S`i a.LL .Arceat�hirth,aun��ng Lnra,lorl� <br /> 1 Locate all parts <br /> -Locate the.Rock It.Clip'SS,micro-inverter/power optimizer,and-the section of the modulefframe in which. . <br /> you will be mounting the micro-inverter/power optimizer. <br /> See fig.A for.acceptable mounting locations. <br /> 2 Install the Rock-it Clip SS <br /> • Slide the Rock-it Clip:SS onto the lip of the-module frame. <br /> • Slide the micro-inverter/power optimizer.intothe opposite lip ofthe.Rock:It Clip SS. <br /> • Tighten the bolt-to-150 in-lb minumum to clamp.the Rock-it Clip.SS to the module-frame and the. <br /> micro-inverter/power optimizer to the Rock-It Clip SS. <br /> Ensure that the.lip on the clip is tight against the frame and that.the micro-inverter/power optimizer flange is' . <br /> tight against the clip flange to avoid rotation during tightening.. <br /> ROCK-IT CUP 2.O inSTaLL <br /> Inverter Flange <br /> WIL. . <br /> Modute'Frame <br /> Rock-lt Up 2.0 <br /> 1 Locate ail'parts <br /> •Locate the Rock-It,Clip 2.0,micro-inverter/power optimizer,and the section of the module frame in which you <br /> will be mounting the micro-Inverter/power optimizer. <br /> 2 Install the Rock-It Clip 2.0.(See below detail). <br /> • Slide-the-Rock-it Clip-2.0 onto the lip of the micro-Inverter/power optimizer. <br /> • .Slide the micro-inverter/power optimizer into the opposite lip of the module frame. <br /> • Tighten the.bolt to 150 In-lb.to clamp the Rock-it Clip 2.0 to-the module frame and-the micro-Inverter/power <br /> optimizer to the Rock=lt Clip.2.0. <br /> • Ensure that.the lip on the clip is tight against.the frame and that the micro-inverter/power optimizer flange is <br /> tight against the clip flange to.avold rotation during tightening. <br /> www.ecofastensolar.com info@ecofastensolarcom 877.859-3947 7 <br />