Laserfiche WebLink
w� CAUTI+�N <br /> ELECTRICAL PRECAUTIONS <br /> ■ Ensure all electrical conductors are at zero voltage potential before installing or servicing this unit. <br /> ■ Never break contact on a circuit without using.the appropriate disconnect device. <br /> ■ Follow established lockout and tagout procedures for all electrical conductors prior to servicing. <br /> ■ Beware of power lines in the vicinity of the roof, where.inadvertent-contact may result in electrocution, <br /> personal injury, or=death. <br /> ■ When disconnecting source or supply circuits, provide sufficient time as stated in the,power electronics <br /> manufacturer's instruction manual in.order to ensure.discharge of all conductors in.the circuit. <br /> ■ Always verify the integrity and proper installation of the electrical components prior to energizing electrical <br /> circuits. <br /> ■ Non-metallic enclosures do not provide grounding means between conduit connections. The use of- <br /> grounding hubs-and.-jumper wires are required: <br /> ■ Grounding must be sized per NEC requirements, and is the responsibility of the installer. <br /> MECHANICAL PRECAUTIONS <br /> ■ When drilling into an attic.space,.ensure that <br /> electrical wires, mechanical obstructions, or <br /> potential electrical hazards are removed from <br /> the vicinity and direction of the drill. <br /> Do not install if the roof is wet,.frosted, or <br /> covered by ice or snow. <br /> ■ If any part of this.product becomes damaged, • <br /> remove and destroy the entirety of the unit. <br /> Failure to do so may result in fire, property <br /> damage, personal injury, electrocution, or <br /> death. <br /> ■ Do not use the product to anchor fall protection <br /> equipment. <br /> www.soltection.com Soltection R]-1 Installation Manual Page 5 <br />