Laserfiche WebLink
4 <br /> ROCK-iT CLIP SS inSTa.L_L <br /> a. l 2'1.1h f om <br /> len^finn Box <br /> q.s <br /> 1 Locate all parts <br /> -Locate the Rock It.Clip SS,micro-inverter/power optimizer;and the section of the module frame in which <br /> you will be mounting the-micro=Inverter/power optimizer. <br /> See fig.A for.acceptable mounting'locations. <br /> 2.Install the Rack It Clip 55 <br /> • Slide the Rock-it Clip'.SS onto the lip of the module frame. <br /> • Slide the micro-Inverter/power optimizer into the opposite lip of the Rock-it Clip SS. <br /> • Tighten the bolt to 150-In-lb minumum to clamp the Rock-it Clip SS to the module frame and the. <br /> -micro4riverter/power optimizer to the Rock-It Clip SS. <br /> • .Ensure that the lip on the clip is tight against the frame and that the micro-inverter/power optimizer flange is <br /> tight against the clip flange to avoid rotation during tightening. <br /> ROCi-<-IT" CLIP 2.0 inST8 L <br /> Inverter.Flange <br /> 4 <br /> Module Frame <br /> Ronk-lt Clip 2.0 <br /> 1 Locate ail parts <br /> -Locate the Rock-it Clip 2:0,micro-inverter/power optimizer,and the section of the module frame in which you <br /> will be mounting the micro-inverter/power optimizer. <br /> 2 Install the Rock-It Clip 20.(See below detail). <br /> • Slide'the Rock-It Clip 2.0 onto the-lip of the micro-inverter/power optimizer. <br /> • ,Slide the micro-inverter/power optimizer into the opposite lip of the module frame. <br /> • Tighten"the.bolt to 150 In-lb to clamp the Rock-it Clip 2.0 to the.module frame and the micro-inverter/power <br /> optimizer to the Rock-'It Clip 2.0. <br /> • Ensure that.the lip on the clip is tight.against the frame and that the micro-inverter/power optimizer flange is <br /> tight against the clip flange to.avoid rotation during tightening. <br /> www.ecofastensolarcom info@ecofastensolarcom 877-859-3947 7 <br />