Laserfiche WebLink
Janus Series 3652 Rolling Doors <br /> to form the curtain. Lap splices are at approximately 20 inches on center vertically in the <br /> installed door. The corrugation height is approximately 5/8 inches and the corrugation <br /> pitch is 3.25 inches.Style variations include door width,windlocks,and wind load rating. <br /> Two black Nylon windlocks are attached to the curtain at every other corrugation. The <br /> windlock were secured with two 3/16"diameter zinc plated steel blind rivets. <br /> Limitations <br /> The drawings cited above are an explicit part of this evaluation report. The text of this <br /> report does not attempt to address all design details, but relies upon the illustrations and <br /> text of these drawings and Instructions as well. <br /> Each door should be chosen based on the "psf" requirement determined for a specific <br /> installation or locale. <br /> The maximum opening width approved with this report Is 18 feet. <br /> The maximum door height for is 20'-0"nominal. <br /> Doors narrower than tabulated width are allowed, but carry the same psf as the next <br /> greater width in the table. <br /> The user of this product is reminded that rolling doors can generate substantial catenary <br /> forces at the jambs ("Vx"). The building jambs must be designed to withstand these loads <br /> in combinations of Vx with Vy(+), and Vx with Vy(-)shown on sheet 2 of the drawings. <br /> This product is not for use in the Florida High Velocity Hurricane Zone(HVHZ). <br /> ti��t111!l11�� <br /> No.S037 <br /> ZZ4pAlsOF��M` A-.` S�y OR%9,-`,6 �� <br /> Date-2018.06.1815•:26:02=65'00-bigitally signed by John E. P.E. �j �B�ypNAi.,; <br /> John E.Scates, P.E. <br /> FL PE##51737 <br /> The digitally-signed file is the original.Printed copies are not originals(just as copies of paper-signed documents are not originals). <br /> 3 <br />