Laserfiche WebLink
PGT Industries,Inc. <br /> NOTICE OF ACCEPTANCE: EVIDENCE SUBMITTED <br /> A. DRAWINGS <br /> 1. Manufacturer's die drawings and sections. <br /> (Submitted under NOA No. 10-0819.05) <br /> 2. Drawing No. 6300JR, titled "Impact-Resistant Aluminum Tube Mullions", sheets 1 <br /> through 25 of 25, dated 08/29/11, with revision C dated 06/19/17, prepared by <br /> manufacturer, signed and sealed by Anthony Lynn Miller,P.E. <br /> B. TESTS <br /> 1. Test reports on: 1)Air Infiltration Test,per FBC,TAS 202-94 <br /> 2)Uniform Static Air Pressure Test,Loading per FBC, TAS 202-94 <br /> 3)Water Resistance Test,per FBC, TAS 202-94 <br /> 4)Large Missile Impact Test per FBC,TAS 201-94 <br /> 5) Cyclic Wind Pressure Loading per FBC,TAS 203-94 <br /> 6)Forced Entry Test,per FBC 2411.3.2.1, and TAS 202-94 <br /> along with marked-up drawings and installation diagram of clipped aluminum <br /> mullions, prepared by Fenestration Testing Lab, Inc., Test Report No. FTL-6443 <br /> (samples A-1 thru E-1), dated 02/28/11, and addendum letter dated 05105111, signed <br /> and sealed by Marlin D. Brinson,P.E. <br /> (Submitted under NOA No. 10-0819.05) <br /> C. CALCULATIONS <br /> 1. Anchor verification calculations and structural analysis, complying with FBC Sth <br /> Edition (2014) and with FBC 6th Edition (2017), prepared by manufacturer, dated <br /> 08/29/17, signed and sealed by Anthony Lynn Miller, P.E. <br /> D. QUALITY ASSURANCE <br /> I. Miami-Dade Department of Regulatory and Economic Resources(RER). <br /> E. MATERIAL CERTIFICATIONS <br /> 1. None. <br /> Jorge M.Plasencia,P.E. <br /> Product Control Unit Supervisor <br /> NOA No. 17-0630.01 <br /> Expiration Date: May 26,2021 <br /> Approval Date: November 09,2017 <br /> E-1 <br />