20-22543 - Laserfiche WebLink

Browse Search

DN-6726:D•H-240 NBG-12LX N OTI F I E R° Addressable Manual Pull Station by Honeywell Intelligent/Addressable Devices -General The Notifier NBG-12LX is a state-of-the-art, dual-action (i.e., requires two motions to activate the station) pull station that includes an addressable interface for any Notifier intelligent = control panel except FireWarden.series panels,and the NSP- _ 25 panel. Because the NBG-12LX is addressable,the control panel can display the exact location of the activated manual station.This leads fire personnel quickly to the location of the lie alarm. Features • Maintenance personnel can open station for inspection and address setting without causing an alarm condition. • Built-in,bicolor LED, which is visible through the handle of _ the station,flashes in normal operation and latches steady - red when in alarm. • Handle latches in down position and the word"ACTIVATED" appears to clearly indicate the station has been operated: • Captive screw terminals wire-ready for easy connection to SLC loop'(accepts up to 12 AWG/3.25 mm2 wire). The NBG-12LX • Can be surface mounted (with SB-10 or SB-ILO) or semi Addressable Manual Pull Station flush mounted. Semi-flush mount to a standard single- gang,double-gang,or 4"(10.16 cm)square electrical box, installation • Smooth dual-action design. The NBG-12LX will mount semi-flush into-a single-gang,dou- • Meets ADAAG controls and operating mechanisms guide- ble-gang, or standard 4".(10.16 cm) square electrical outlet lines (Section 4.1.3[13]); meets ADA requirement for 5 lb. box, or will surface mount to the model SB-10 or SB-1/0 sur- maximum activation force. face backb6k. If the NBG-12LX is being semi-flush mounted, Highly visible. then the optional trim ring-(BG12TR) may be used. The • BG12TR is usually needed for semi-flush mounting with 4" • Attractive shape and textured finish. (10.16 cm)or double-gang boxes(not with single-gang boxes). • Key reset. • Includes Braille text on station handle. Operation • Optional trim ring(BG12TR). Pushing in,then pulling down on the handle causes it to latch • Meets UL 38, Standard for Manually Actuated Signaling in the down/activated position. Once latched,the word"ACTI- Boxes. VATED" (in bright yellow) appears at the top of the.handle, • Up to 99 NBG-12LX stations per loop'on CLIP protocol while a portion of the handle protrudes from the bottom of the loops. station.To reset the station,simply unlock the.station with the Up to 159 NBG-12LX stations per loop on FlashScanO pro- key and pull the door open.This action resets the handle;clos- e ing the door automatically resets the switch. tocol loops. • Dual-color -LED blinks green to indicate normal on Each manual station, on command from the control panel, - FlashScan(b systems. sends data to the panel representing the state of the manual switch.Two rotary decimal switches allow address settings (1 —159 on FlashScan@ systems,1'—99 on CLIP systems). Construction Shell, door, and-handle are molded of durable polycarbonate' Architectural/Engineering material with a textured finish. Specifications Specifications Manual Fire Alarm Stations shall be non-coded, with-a key- operated reset lock in order that they may be tested, and so • Shipping Weight:9.6 oz.(272.15 g) designed that after actual Emergency Operation,they cannot • Normal operating voltage:24 VDC. be restored to normal except by use.of a key.An operated sta- . Maximum SLC loop voltage:28.0 VDC. tion shall automatically condition itself so as to be visually detected as activated.Manual stations shall be constructed of • Maximum SLC standby current:375 NA. red-colored polycarbonate material with clearly visible operat- • Maximum SLC alarm current:5 mA. ing instructions provided on the cover. The word FIRE shall • Temperature Range:32°F to 120°F(0°C to 49°C) appear on the front of the stations in white letters, 1.00,inches • Relative Humidity:10%to 93%(noncondensing) (2.54 cm) or larger. Stations shall be suitable for surface mounting on matching backbox SB-10 or SB-I/O;or semi-flush • For use indoors in a dry location mounting on a standard single-gang, double-gang, or DN-6726:D•4/18/2012—Page 1 of 2