|
PGT Industries,Inc.
<br /> NOTICE OF ACCEPTANCE: EVIDENCE SUBlNHTTED
<br /> A. DRAWINGS
<br /> 1. Manufacturer's die drawings and sections, f
<br /> (Submitted cinder NOA No. 15-0812.03)
<br /> 2. Drawing No. IVID-DE5460-01 titled "Double Hung Window Installation -NI", sheets
<br /> 1 through 12 of 12, dated 05/15/15, with revision B dated 06/06/17, prepared by
<br /> manufacturer, signed and sealed by Anthony Lynn Miller,P.E.
<br /> B. TESTS
<br /> 1. Test reports,on: 1)Uniform Static Air Pressure Test, Loading per FBC,TAS 202-94
<br /> 2) Large Missile'Impact Test per FBC, TAS 201-94
<br /> 3) Cyclic Wind Pressure Loading per FBC, TAS 203-94
<br /> along with marked-up drawings;and installation diagram of a PVC sliding glass door,
<br /> a PVC fixed window and an aluminum sliding glass door, using: Kodispace 4SG TPS
<br /> spacer system, Durasealo spacer system, Super Spacer`s NXTTM spacer system and XL
<br /> EdgeTM spacer system at insulated glass,prepared by Fenestration Testing Laboratory,
<br /> f Inc., Test Reports No, FTL-8717, FTL-8968 and FTL-8970, dated 11/16/15,
<br /> 06/07/16 and 06/02/16 respectively,all signed and sealed by Idalmis Ortega,P.E.
<br /> (Submitted under previous NOA No. 16-0 714.08)
<br /> 2. Test reports on: 1) Air Infiltration Test, per FBC, TAS 202-94
<br /> 2)Uniform Static Air Pressure Test, Loading per FBC TAS 202-94
<br /> 3)'Water Resistance Test,per FBC, TAS 202-94
<br /> 4) Forced Entry Test,per FBC 2411.3.2.1,and TAS 202-94
<br /> 5) Large Missile'Impact Test per FBC, TAS 201-94
<br /> 6) Cyclic Wind Pressure Loading per FBC, TAS 203-94
<br /> along with masked-up drawings and installation diagram of series 5460 and series
<br /> 5560 PVC double hung windows,prepared by Fenestration Testing Laboratory, Inc.,
<br /> Test Report No. FTL-8006, dated 04/27/15, signed and sealed by Idalmis Ortega,P.E.
<br /> (Submitted under NOA No. 15-0812.03)
<br /> C. CALCULATIONS
<br /> 1: Anchor verification calculations and structural analysis, complying with FBC-5='
<br /> Edition (2014) and FBC 611 Edition (2017), dated 07/30/15 and updated on 08/29/17,
<br /> prepared by manufacturer, signed'and sealed by Anthony Lynn Miller,P.E.
<br /> (Submitted partially under NOA;No. IS-0812.03)
<br /> 2. Glazing complies with ASTM E1300-09
<br /> D. QUALITY ASSURANCE
<br /> 1. Miami-Dade Department of Regulatory and Economic Resources (RER),
<br /> an erez,P.E.
<br /> Product I tro xaminer
<br /> NOA .17-0630.09
<br /> Expiration Date: September 17,2020
<br /> Appr6val Date: November 02,2017
<br /> E-1
<br />
|