|
Page 5 of 6
<br /> O MICROMATIC°STANDARD
<br /> A RESPONSE UPRIGHT
<br /> SPRINKLER VK100 (K5.6)
<br /> The Viking Corporation,210 N Industrial Park Drive, Hastings MI 49058
<br /> Telephone: 269-945-9601 Technical Services: 877-384-5464 Fax: 269-818-1680 Email:techsvcs@vikingcorp.com
<br /> Visit the Viking website for the latest edition of this technical data page:www.vikinggroupinc.com
<br /> Approval Chart 2 (iFM)
<br /> Temperature KEY
<br /> Micromatic®Sta rd Response Upright Sprinkler UK100 Flnlsh
<br /> Maximum 175 PSI(a1`2 bar,)WWP Q1X. Escutcheon PPifcaaa
<br /> Sprinkler Base SIN Thread Size Nominal K-Factor Overall Length FM Approvals'
<br /> Part Number' NPT BSP U.S. I metric inches mm (Refer also to Design Criteria below.)
<br /> Standard Orifice
<br /> 12986 VK100 1/2" 15 mm 5.6 80.6 1 2-1/4" 57 Al,B2,C3, D1, E4,F6
<br /> 12993 VK100 — 15 mm 5.6 80.6 2-1/4" 57 A1, D1, E4, F6,G5
<br /> NOTICE . .ility(Contact Local Viking Office)
<br /> 10138 VK100 1/2" 15 mm 5.6 80.6 2-1/4" 57 Al,B2,C3,D1,E4,F6
<br /> 10193 VK100 — 15 mm 5.6 80.6 2-1/4" 57 Al,G5, D1, E4, F6
<br /> Approved Temperature Ratings
<br /> A-135°F(57°C),155°F(68°C), 175°F(79°C),200
<br /> °F(93°C),212°F(100°C),286°F(141 °C),and 360°F Approved Finishes
<br /> (182°C) 1 -Brass,Chrome,White Polyester°,and Black Polyester"
<br /> B-135°F(57°C),155°F(68°C),175°F(79°C),200°F 2-Wax-Coated Brass(corrosion resistant)
<br /> (93°C)and 212°F(100°C)
<br /> C-286°F(141 °C) 3-High Temperature 200°F(93°C)Wax Coating(corrosion resistant);maximum ambient
<br /> D-500°F(260°C)s temperature allowed at ceiling=150°F(65°C)
<br /> E-155°F(68°C) 4-Wax-Coated Brass and Wax Over Polyesters
<br /> F-155°F(68°C),175°F(79°C),200°F(93°C),286°F 5-White Polyester and Wax-Coated Brass(corrosion resistant)
<br /> (141 °C),360°F(182°C),and 500°F(260°C)5 6-ENT6
<br /> G-135°F(57°C), 155°F(68°C),175°F(79°C),and
<br /> 200°F(93°C)
<br /> Footnotes
<br /> ' Base part number is shown.For complete part number,refer to Viking's current price schedule.
<br /> 2 Metric K-factor shown is for use when pressure is measured in bar.When pressure is measured in kPa,divide the metric K-factor shown by 10.0.
<br /> 3 This table shows the listings and approvals available at the time of printing.Check with the manufacturer for any additional approvals.
<br /> Other colors are available on request with the same Approvals as the standard colors.
<br /> 5 Sprinklers of Ultra-High temperature rating are intended for use inside ovens,dryers,or similar enclosures with normal operating temperatures above
<br /> 300°F(149°C).Where the ambient temperature around the Ultra-High temperature rated sprinkler is significantly reduced below 300°F(149°C),
<br /> the response time of the Ultra-High temperature rated sprinkler may be severely retarded.
<br /> 6 FM approved as corrosion resistant.
<br /> f - 3
<br /> « : "
<br /> .`�` _ .tea..-. �' ?•Ae'.:'L.0 1, ,L',:ps - m-#&k)....
<br /> FM Approval Reguirements:
<br /> The Viking Micromatic® Standard Response Upright Sprinkler VK100 is is FM Approved as standard response Non-Storage upright sprinkler as
<br /> indicated in the FM Approval Guide. For specific application and installation requirements, reference the latest applicable FM Loss Prevention Data
<br /> Sheets (including Data Sheet 2-0). FM Global Loss Prevention Data Sheets contain guidelines relating to, but not limited to: minimum water supply
<br /> requirements,hydraulic design,ceiling slope and obstructions,minimum and maximum allowable spacing,and deflector distance below the ceiling.
<br /> NOTE:The FM installation guidelines may differ from cULus and/or NFPA criteria.
<br /> IMPORTANT:Always refer to Bulletin Form No.F_091699-Care and Handling of Sprinklers.Also refer to page SR1-3 for gen-
<br /> eral care,installation,and maintenance information.Viking sprinklers are to be installed in accordance with the latest edition
<br /> of Viking technical data,the appropriate standards of NFPA, FM Global, LPCB,APSAD,VdS or other similar organizations,
<br /> and also with the provisions of governmental codes, ordinances, and standards,whenever applicable.
<br /> Form No. F_052014 18.10.11 Rev 17.1.P65
<br />
|