|
�t
<br /> ONEMOjetc.
<br /> 14. Lightweight Insulating Concrete(LWC)shall be cast in accordance with FBC Section 1917 to the satisfaction of the Authority Having Jurisdiction. For systems where specific LWC is referenced,refer to current LWC
<br /> Product Approval for specific deck construction and limitations. Unless otherwise noted,for systems where specific LWC is not referenced,the minimum design mix shall be 300 psi. In all cases,the minimum top-coat
<br /> thickness is 2-inches. For LWC over structural concrete,reference is made to FBC Section 1917.4.1,Point 1. For"pre-existent"LWC references,listings were established through testing over lightweight concrete cast
<br /> using only foaming agent(ASTM C896),water and Portland cement(ASTM C150),with no proprietary additives,in accordance with procedures adopted by Miami-Dade BCCO(FBC CER1592). Unless otherwise noted,
<br /> use of these listings in new construction or re-roof(tear-off)applications is at the discretion of the Designer or Record and Authority Having Jurisdiction.
<br /> 15. Unless otherwise noted,refer to the following references for bonded base,ply or cap sheet applications.
<br /> POLYGLAss ROOF COVERS
<br /> REFERENCE LAYER MATERIAL APPLICATION
<br /> BP-AA Base Ply One or more plies Polyglass G2 Base,FBC Approved ASTM D4601,Type II Hot Asphalt at 20 40
<br /> (Base and Ply sheets, Ply One or more plies Polyglass Ply IV,Polyglass Ply VI,FBC Approved ASTM D2178,Type IV or VI Ibs/square
<br /> Asphalt-Applied) Note: Asphalt-applied sheets or insulation shall not be applied to poly-film surfaced membranes.
<br /> Base Ply One ply Elastobase(sand/sand),Elastoflex V,Elastoflex S6,Elastoflex S6 HP,Elastoshield HT PG350 at 1.5-2.0
<br /> SBS-CAI Cap Ply Elastoshield HT G.Elastoshield HT G FR,Elastoflex V G,Elastoflex V G FR,Elastoflex S6,Elastoflex S6 HP,Elastoflex S6 G,Elastoflex gal/square
<br /> S6 G FR,Elastoshield TS G,Elastoshield TS G FR,Polyfresko G SBS(sand-backed),Polyfresko G SBS FR(sand-backed)
<br /> Base Ply One ply Elastobase(sand/sand),Elastoflex V,Elastoflex S6,Elastoflex S6 HP Polyplus 35 at 1.5-2.0
<br /> SBS-CA2 Cap Ply Elastoshield HT G,Elastoshield HT G FR,Elastoflex V G,Elastoflex V G FR,Elastoflex S6,Elastoflex 56 HP,Elastoflex S6 G,Elastoflex gal/square
<br /> S6 G FR,Elastoshield TS G,Elastoshield TS G FR,Polyfresko G SBS(sand-backed),Polyfresko G SBS FR(sand-backed)
<br /> Base Ply or Ply One or more plies Elastobase(sand/sand or poly/sand),Elastobase P(sand/sand or poly/sand),Elastoflex V,Elastoflex S6,Elastoflex
<br /> SBS-AA S6 HP,Elastoshield HT Hot Asphalt at 20-40
<br /> (SBS,Asphalt-Applied) Cap Ply Elastoshield HT G,Elastoshield HT G FR,Elastoflex V,Elastoflex V G,Elastoflex V G FR,Elastoflex S6,Elastoflex S6 HP,Elastoflex S6 G, Ibs/square
<br /> Elastoflex S6 G FR,Elastoshield TS G,Elastoshield TS G FR,Polyfresko G SBS(sand-backed),Polyfresko G SBS FR(sand-backed)
<br /> Note: Asphalt-applied sheets or insulation shall not be applied to poly-film surfaced membranes.
<br /> Base Ply or Ply One or more plies Elastobase(sand/poly),Elastobase(poly/poly),Elastoflex V,Elastoflex S6,Elastoflex S6 HP,Elastoshield HT
<br /> SBS-TA Elastoshield HT G,Elastoshield HT G FR,Elastoflex V,Elastoflex V G,Elastoflex V G FR,Elastoflex 56,Elastoflex S6 HP,Elastoflex S6
<br /> (SBS,Torch-Applied) Cap Ply G,Elastoflex S6 G FR,Elastoshield TS G,Elastoshield TS G FR,Polyfresko G SBS(poly-film backed),Polyfresko G SBS FR(poly-film Torch-Applied
<br /> backed)
<br /> SBS-SA-H Base Ply Elastobase SA Self-adhering (followed
<br /> ISM,Self-Adhering,Hybrid Systems) by torch-applied sheet)
<br /> Base Ply One or more plies Elastoflex SA V,Elastoflex SA V FR,Elastoflex SA V Plus,Elastoflex SA V Pius FR,Elastoflex SA Base HD
<br /> SBS-SA Cap Ply Elastoflex SA P,Elastoflex SA P FR,Polyreflect Self-Adhering
<br /> (SBS,Self-Adhering) Note: Unless otherwise noted,permissible membrane substrates for SBS-SAare limited to the SBS-SA Base Ply options herein,
<br /> Elastobase(poly/sand)or Elastobase(poly/poly).
<br /> APP-CA1 Cap Ply Polyflex G FR PG350 at 1.5-2.0
<br /> gal/square
<br /> APP-TA Base Ply or Ply One or more plies Polyglass Base,Polyflex,Polybond
<br /> (APP,Torch-Applied) Cap Ply Polyflex,Polyflex G,Polyflex G FR,Polybond,Polybond G,Polyfresko G,Polyfresko G FR Torch-Applied
<br /> APP-SA-H Base Ply Polyflex SA Base Self-adhering(followed
<br /> (APP,Self-Adhering,Hybrid Systems) by torch-applied sheet)
<br /> APP-SA Cap Ply Polyflex SA P,Polyflex SA P FR,Polyfresko G SA,Polyfresko G SA FR,Polykool
<br /> (APP,Self-Adhering) Note: Unless otherwise noted,permissible membrane substrates for APP-SAare limited to the SBS-SA Base Ply options herein, Self-Adhering
<br /> Elastobase(poly/sand)or Elastobase(poly/poly).
<br /> NEMO ETC,LLC Evaluation Report P9290.02.08-R24 for FL1654-R26
<br /> Certificate of Authorization#32455 6n'EDITION(2017)FBC NON-HVHZ EVALUATION Revision 24:10/14/2019
<br /> ©2018 NEMO ETC,LLC Polyglass Modified Bitumen Roof Systems;(954)233-1330 Appendix 1,Page 3 of 81
<br />
|