Laserfiche WebLink
CONVENTIONAL FIRE CONTROL PANEL ACCESSORY <br /> PS-DA and PS-SA <br /> Conventional Pull-Stations <br /> Engineering Specification <br /> Manual Fire Alarm Stations shall be non-code,with a key-operated reset lock in order that they may be tested, <br /> and so designed that after actual Emergency Operation, they cannot be restored to normal except by use of a <br /> key.An operated station shall automatically condition itself so as to be visually detected as activated. Manual <br /> stations shall be constructed of red colored LEXAN®(or polycarbonate equivalent)with clearly visible operating <br /> instructions provided on the cover.The word FIRE shall appear on the front of the stations in white letters, 1.00 <br /> inches (25.4 mm)or larger.* Stations shall be suitable for surface mounting on matching back-box SB-10; or <br /> semi-flush mounting on a standard single-gang, double-gang, or 4" (10.16 cm)square electrical box, and shall <br /> be installed within the limits defined by the Americans with Disabilities Act (ADA)or per national/local require- <br /> ments. Manual Stations shall be Underwriters Laboratories listed. <br /> *NOTE: The words "FIRE/FUEGO"on the PS-DASP shall appear on the front of the station in white letters, <br /> approximately 3/4" high. <br /> PULL <br /> DOWN <br /> a <br /> PS-SA Front View PS-DA Front View PS-SA Rear View PS-DA Rear View <br /> SILENT This document is not intended to be used for installation purposes.We try to MADE IN AMERICA <br /> KNIGHT keep our product information up-to-date and accurate.We cannot cover all <br /> specific applications or anticipate all requirements.All specifications are sub- P/N 350241 Rev.D <br /> b Honeywell lect to change without notice.For more information,contact Silent Knight 12 ©2011 Honeywell International Inc. <br /> y yw Clintonville Road Northford,CT 06472-1610 Phone:(800)328-0103, <br /> Fax:(203)484-7118.www.slientknight.com <br />