Laserfiche WebLink
SYSTEM <br /> SENSOR <br /> Outdoor Selectable. E <br /> Output Horns, <br /> Strobes and "+ <br /> Horn Strobes for <br /> Wall Applications <br /> SPECTfert <br /> SpectrAlertO Advance outdoor audible visible products AL lu v AL w c E <br /> are rich with features that cut installation times and <br /> maximize profits. <br /> Features SpectrAlert Advance offers the broadest line of outdoor horns, <br /> • Weatherproof per NEMA 4X,IP56 strobes,and horn strobes in the industry.With white or red plastic <br /> housings,wall or ceiling mounting options,and plain or FIRE-printed <br /> • Listed to UL 1638(strobe)and UL 464(horn) devices,SpectrAlert Advance can meet virtually any application <br /> • Compatible with System Sensor synchronization protocol and requirement,including indoor,outdoor,wet,and dry applications in <br /> legacy SpectrAlert products temperatures from-40oF to 151°F. <br /> • Field-selectable candela settings: 15, 15/75,30,75,95, 110, 115, <br /> 135, 150, 177,and 185 Like the entire SpectrAlert Advance line,outdoor horns,strobes, <br /> • Automatic selection of 12-or 24-volt operation at 15 and and horn strobes for wall applications include a variety of features <br /> 15/75 candela that increase application flexibility and simplify installation.First, <br /> • Rotary switch for horn tone and three volume selections field-selectable settings,including candela,automatic selection of <br /> 12-or 24-volt operation,horn tones,and three volume options enable <br /> • Horn rated at 88+dBA at 16 volts installers to easily adapt devices to meet requirements. <br /> • Rated from-40°F to 151 IF <br /> • Universal mounting plate with an onboard shorting spring that Next,SpectrAlert Advance devices use a universal mounting plate <br /> tests wiring continuity before devices are installed for both wall and ceiling applications.This mounting plate includes <br /> • Plug-in design with minimal intrusion into the back box an onboard shorting spring that ensures wiring continuity before <br /> • Tamper-resistant construction devices are installed,so installers can verify proper wiring without <br /> mounting the devices and exposing them to potential construction <br /> • Listed for ceiling or wall mounting damage.Once the plates are mounted,all SpectrAlert Advance <br /> devices utilize a plug-in design with a single captured screw to <br /> speed installation and virtually eliminate costly ground faults. <br /> Outdoor devices ship with weatherproof plastic back boxes(metal <br /> back boxes are available separately)that accommodate in-and- <br /> Agency Listings out wiring for daisy chaining devices.Plastic back boxes feature <br /> removable side flanges and improved resistance to saltwater <br /> corrosion.Knock-outs located on the back eliminate the need to drill <br /> SIGNALING <br /> 0holes for screw-in mounting.Plastic and metal weatherproof back <br /> UL pA boxes come with 3/4-inch top and bottom conduit entries and 3/4-inch <br /> LISTED F M MFA 7300-1653:187(horn utdoor 1 bes) knock-outs at the back.A screw-in NPT plug with an O-ring gasket <br /> str54011(chimes,horn strobes,horns) APPROVED approved chime strobes) for a watertight seal is included with each back box. <br /> 53593(outdoor and alert strobes) 3023572 MEA452-05-E 7135-1653:189(horns,chimes) <br /> AVDS115-02.1Z3/2019•Page i <br />