Laserfiche WebLink
PGT Industries,Inc. <br /> NOTICE OF ACCEPTANCE: EVIDENCE SUBMITTED <br /> A. DRAWINGS <br /> 1. Manufacturer's die drawings and sections. <br /> (Submitted under previous NOA No. 15-0519.06) <br /> 2. Drawing No. MD-SH5400-01 titled"Single Hung Window Installation-NI", sheets 1 <br /> through 12 of 12, dated 05115115, with revision B dated 06/06/17, prepared by <br /> manufacturer, signed and sealed by Anthony Lynn Miller, P.E. <br /> B. TESTS <br /> 1. Test reports on: 1)Uniform Static Air Pressure Test,Loading per FBC, TAS 202-94 <br /> 2)Large Missile Impact Test per FBC,TAS 201-94 <br /> 3) Cyclic Wind Pressure Loading per FBC, TAS 203-94 <br /> along with marked-up drawings and installation diagram of a PVC sliding glass door, <br /> a PVC fixed window and an aluminum sliding glass door, using: Kodispace 4SG TPS <br /> spacer system, Durasealo spacer system, Super Spacer®NXTT`'f spacer system and XL <br /> EdgeTM spacer system at insulated glass,prepared by Fenestration Testing Laboratory, <br /> Inc., Test Reports No. FTL-8717, FTL-8968 and FTL-8970, dated 11/16/15, <br /> 06/07/16 and 06/02/16 respectively, all signed and sealed by Idalmis Ortega,P.E. <br /> (Submitted under previous NOA No. 16 0714.04) <br /> 2. Test reports on: 1)Air Infiltration Test, per FBC, TAS 202-94 <br /> 2)Uniform Static Air Pressure Test,Loading per FBC TAS 202-94 <br /> 3) Water Resistance Test,per FBC, TAS 202-94 <br /> 4)Forced Entry Test,per FBC 2411.3.2.1,and TAS 202-94 <br /> 5)Large Missile Impact Test per FBC,TAS 201-94 <br /> 6) Cyclic Wind.Pressure Loading per FBC, TAS 203-94 <br /> along with marked-up drawings and installation diagram of a series 5500 PVC single <br /> hung window,prepared by Fenestration Testing Laboratory,Inc., Test Report No. <br /> FTL-7964, dated 11/15/14, signed and sealed by Idalmis Ortega,P.E. <br /> (Submitted under NOA No. 15-0519.06) <br /> C. CALCULATIONS <br /> 1. Anchor verification calculations and structural analysis, complying with FBC 5" <br /> Edition (2014), dated 05/15/15 and 08/29/17,prepared by manufacturer, signed and <br /> sealed by Anthony Lynn Miller,P.E. <br /> (Submitted under NOA No. 15-0519.06) <br /> 2. Glazing complies with ASTM E1300-09 <br /> D. QUALITY ASSURANCE <br /> 1. Miami--Dade Department of Regulatory and Economic Resources (RER). <br /> UL L:21A A21 <br /> Manuel Pere <br /> Product Control E amine <br /> NOA.No. 17- 636 <br /> Expiration Date: July 30,2020 <br /> Approval Date: November 30,2017 <br /> E-1 <br />