21-1353 - Laserfiche WebLink

Browse Search

ES-P-LFLM495 Product Specification Job Name Contractor Job Location HYDROGUARD® �. Series LFLM495 Thermostatic Mixing Valves for, era NSF. Lavatory Installations Advanced Thermal ® "o Features Activation • Temperature control to ASSE 1069, 1070 and 1017 down to 0.5 gpm UNION CONNECTIONS u Advanced thermal actuator improves performance at low flow Female NPT 1/2"(15) LFLM495-1 u Lead Free*cast copper silicon alloy body construction for 3/4" 20 LFLM496-1 durability and to comply with Lead Free*requirements 1" 25 LFLM497-1 Adjustable temperature selection with lock down Sweat 1/2"(15) LFLM495-2 Union connections for easy maintenance 3/4"(20) LFLM496-21" 25) LFLM497-2 Integral checks and screen prevents cross-flow and contamination CPVC 1/2"(15) LFLM495-3 Available in 1/2",3/4", 1"(15,20,25 mm)with NPT,Sweat, PBX, 3/4"(20) LFLM496-3 Quick-Connect,CPVC union connections and w/press 1"(25) LFLM497-3 PEX 1/2"(15) LFLM495-4 Specifications 3/4"(20) LFLM496-4 Temperature Adjustment: 80°-120°F(27°C to 49°C) 1"(25) LFLM497-4 Approach Temperature: 50F(3°C)above set point Quick-Connect 1/2"(15) LFLM495-5 Max.Operating Pressure: 125 psi(861 kPa) 3/4" 20 LFLM496-5 Max.Hot Water Temperature: 200°F(93°C) 1"(25) LFLM497-5 Max.Pressure Differential w/Press 1/2"(15) LFLM495-1 w/press between 3/4"(20) LFLM496-1 w/press Hot&Cold Water Supplies: 25% 1" 2 LFLM497-1 w/press Minimum Flow: 0.5 gpm(1.90 Ipm)when tested in accor- f WARNING dance with ASSE 1017-2003 Check Valves: Integral i When used in an ASSE 1017 application at the hot water source,the Construction: Lead Free*Cast copper silicon alloy body Powers Thermostatic Mixing Valve Series LFLM495 cannot be used by itself Listing: ASSE 1069,ASSE 1070,ASSE 1017,IAPMO to control final temperature at fixtures where ASSE Standard 1016 or ASSE cUPC,and NSF372 Standard 1070 listed devices are required.Such use may result in severe bodily injury(i.e.scalding or chilling)and/or death.ASSE Standard 1016, Viega Pro-PressTM connections are optional factory installed fitting on ASSE 1069 or ASSE Standard 1070 listed devices,such as Powers Series each end of the approved/certified assembly LFe480 or LFLM495,should be used at point-of-use to prevent possible injury.Consult all product manuals,and instruction guides before installing Capacity any referenced product. Recirculation systems should recirculate water at temperatures over 140oF Pressure Drop Across The Valve to reduce the risk of bacterial growth in the piping.This valve should not be (Cv)1 psi 5 psi 10 psi 15 psi 20 psi 30 psi 45 psi 60 psi used at the hot water source in recirculation systems. i,7 kPa) (34 kPa) (69 kPa) (103 kPa) (138 kPa) (207 kPa) (310 kPa) (414 kPa) AM 179 4.0 gpm. 5.7 gpm 7.0 gpm 8.0 gpm 9.8 gpm 12.0 gpm 13.9 gpm The information contained herein is not intended to replace the full product (15.0Ipm) (22.0 Ipm) (26.0 Ipm) (30.01pm) (37.0Ipm) (45.0 Ipm) (53.0Ipm) installation and safety information available or the experience of a trained product installer.You are required to thoroughly read all installation instructions 'The wetted surface of this product contacted by consumable and product safety information before beginning the installation of this product water contains less than 0.25%of lead by weight. Powers product specifications In U.S.customary units and metric are approbmate and are provided for reference only.For precise measurements, POWERS' please contact Powers Technical Service.Powers reserves the right to change or modify product design,construction,specifications,or materials with- out prior notice and without incurring any obligation to make such changes and modifications on Powers products previously or subsequently sold. A VVATrS Brand