Laserfiche WebLink
00, 04A.WUNNIN, <br /> ELECTRICAL PRECAUTIONS <br /> ■ Ensure all electrical conductors are.at zero voltage potential:before installing or servicing this unit. <br /> ■ Never break contact on a circuit without using the appropriate disconnect device. <br /> ■ Follow established-lockout and tagout procedures for all electrical conductors prior to servicing. <br /> ■ Beware of power lines in.the vicinity of the roof, where inadvertent contact may result in electrocution, <br /> personal injury, or.death. <br /> ■ When disconnecting,source.or supply circuits, provide sufficient time.as stated in the.power-electronics <br /> manufacturer's instruction manual in order to..ensure discharge of all conductors in the circuit. <br /> • Always verify the integrity and proper installation of the electrical components prior to energizing electrical <br /> circuits. <br /> ■ Non-metallic enclosures do not provide grounding means between conduit connections. The use of <br /> grounding hubs and jumper wires are required. <br /> ■ Grounding must be sized per NEC requirements, and is the responsibility of the installer. <br /> MECHANICAL PRECAUTIONS <br /> ■ When drilling into an attic space, ensure that <br /> electrical wires, mechanical obstructions, or <br /> potential electrical hazards are removed from <br /> the vicinity and direction of the drill. <br /> ■ Do not install -if the roof is wet, frosted, or <br /> covered by ice or snow. <br /> ■_ If any part of this product becomes damaged, • <br /> remove and.destroy the entirety of-the unit. <br /> Failure to do so, may result in fire; property <br /> damage, personal injury, electrocution, or <br /> death. <br /> ■ Do not use the product to anchor fall protection <br /> equipment. <br /> www.soltection.com Soltection RJA Installation Manual Page 5. <br />