Laserfiche WebLink
1 <br /> � 1 <br /> Remove RJ-1,flip it over,wipe it clean&apply Reinstall Unit. Use the two supplied Decking <br /> a bead of roofing sealant to the underside of the Screws to mount the flashing to the roof. <br /> flashing unit. Ensure that it's placed in the Torque to the specification indicated in the <br /> "Upside-down U"Shape to support engress specifications. Refer to Table T2(page 10)for <br /> water protection, AS SHOWN. the proper tightening torques. <br /> STEP 10 STEP 11 <br /> POPULATE RJ-1 <br /> �k, I7 <br /> • Populate the RJ-1 unit using the <br /> appropriate wire connectors, terminal <br /> blocks, or other necessary components. <br /> • Ensure that the components installed are <br /> rated for and are suitable for the intended <br /> purpose. <br /> • The RJ-1 unit is provided with multiple }� a <br /> standoffs which can accommodate <br /> accessories to be mounted. <br /> Step 11 . A <br /> Install the cover onto the top of the enclosure. <br /> Tighten 4 cover screws to the Torque value <br /> indicated in <br /> Table T3(see page 10) <br /> STEP 12 <br /> www.soltection.com Soltection RJ-1 Installation-Manual Page 10 <br />