21-1419 - Laserfiche WebLink

Browse Search

Pr-C-4GG4 The Symbol of Protection Conventional Fire Alarm Control Panel User Interface The FIB-1000,FCB-1000 and the SPG-1000 may be installed in the The fire alarm control panel has a 4 x 20 LCD display to provide slacker bracket or ordered with the optional rack-mount enclosure. information to the system status.The keypad has navigation keys MC-1000 Multi-Connect allows up to sixty-three panels to share a to allow manipulation of the Menu on.board the panel.The panel is single reporting technology. shipped standard with the following LEDs: AE-2—Two card expansion cabinet. • AC Power-Green AE-8—Eight card expansion cabinet. • Alarm-Red AE-14—Fourteen card expansion cabinet. • Earth Fault-Amber Ethernet/I.P. Connection Supervisory-Amber The PFC-4064 is shipped standard with an Ethernet connection. • Silenced-Amber This connection is the programming port and may be connected to a building Wide Area Network(WAN)or Local Area Network • Trouble-Amber (LAN)..Once connected to the Internet,the panel may be selectively The common buttons include a Silence,Reset.,Acknowledge,and programmed to e-mail alarm conditions,trouble conditions, Drill.All of the buttons are accessible once the locked door is supervisory conditions,test,Event History and detector status.An opened. e-mail may be sent to the panel and the panel will e-mail the event history,detector status,configuration file or server status to an P-Link authorized E-mail account.In addition,reminders may be set to send an e-mail for service,testing or other conditions. The PFC-4064 has a proprietary communication protocol that communicates through a RS-485 connection to field devices.Up In addition,the Ethernet connection is UL listed as an IP to the UL communicator.The IP communicator is listed to report to 31 devices maybe connected to a single P-Link connection.The P-Link inc listed Sur-Gard III IP receiver.The IP communicator replaces the includes the communication terminals and regulated 24 VDC traditional less reliable alarm communicator transmitter that utilized connection for the field devices.The field devices may be any of the telephone lines.The IP communicator is an active method of following: connection and conitnunication to the monitoring station. IDC-6—Initiating device circuit expander,provides an additional six (6)inputs. RA-6075R—2 x 16 LCD annunciator with a key pad in a locked metal enclosure. RA-650OR(F)—4 x 40 LCD annunciator with a key pad in a locked metal enclosure.Flush mount version available. LED-16(F)—16 LED annunciator with common indicators in a locked metal enclosure.Flush mount version available. PSN-1000(E)—10 amp,remote intelligent power supply with 6 NACs,2 Inputs and a P-Link repeater. CA-4064—Class A convertor that converts the NACs and P-Link connection, UD-2000—UL listed,Dual line telephone alarm communicator. DRV-50—LED driver expander,used to connect up to 50 LEDs in a graphic display. FCB-1000—Fire communication bridge,provides remote mounting of the Ethernet connection. FIB-1000—Fiber interface module,used to extend P-Link to multi- mode fiber(2 required). RLY-5—Relay module,provides 5 form C relay contacts rated at 3.0 amps 24VDC/125AC. SPG-1000—Serial parallel gateway,allows for the connection to a serial or parallel printer. Potter Electric Signal Company, LLC St. Louis, MO Phone: 800-325-3936 www.pottersignal,coiii 8830139-REV E • 9119 PAGE 4 OF 5