21-1630 - Laserfiche WebLink

Browse Search

CREEK OWENS CORNING ROOFING AND ASPHALT LLC WeatherLock@ Underlayments(Non-HVHZ) TECHNICAL SERVICES, LLC PRODUCT DESCRIPTION AND LIMITS OF USE WeatherLock®G WeatherLock®G is an ASTM D 1970 self-adhered underlayment constructed from SBS (Brentwood, NH or modified asphalt, a fiberglass mat reinforcement and surfaced with granules. The Houston, TX) product is supplied in 2-sq.rolls with nominal dimensions of 3-ft x 66.7-ft. WeatherLock® G is permitted to be used as prescribed in FBC Section 1507.1.1 and Table 1507.1.1.1 for mechanically attached roofing coverings. Exposure on the roof deck shall be limited to a maximum 30 days. WeatherLock®Mat WeatherLock® Mat is an ASTM D 1970 self-adhered underlayment constructed from (Brentwood,NH or SBS modified asphalt with a fiberglass mat reinforcement. The product is supplied in Houston, TX) 1-sq. rolls with nominal dimensions of 3-ft x 33.3-ft and 2 sq. rolls with.nominal dimensions of 3-ft x 66.77ft. WeatherLock®Mat is permitted to be used as prescribed in FBC Section 1507.1.1 and Table 1507.1.1.1 for mechanically attached roof coverings. Exposure on the roof deck shall be limited to a maximum 30 days. WeatherLock®Metal WeatherLock® Metal is an ASTM D 1970 self-adhered underlayment constructed from (Brentwood, NH) SBS modified asphalt with a fiberglass mat reinforcement and plastic film surface. The product is supplied in 2.0 sq.rolls with nominal dimensions of 3-ft x 66.7-ft. WeatherLock®Metal is permitted to be used as prescribed in FBC Section 1507.1.1 and Table 1507.1.1.1 for mechanically attached roof coverings. Exposure on the roof deck shall be limited to a maximum 90 days. WeatherLock® WeatherLock®Specialty Tile & Metal (Green Facer) is an ASTM D 1970 nd FRSA/TRI Specialty Tile&Metal Florida High Wind Concrete and Clay Tile Installation Manual, Sixth Edition compliant (Green Facer) self-adhered underlayment constructed from SBS modified asphalt and surfaced with a (Brentwood, NH) non-woven polyester fabric. The product is supplied in 2.14 sq. rolls with nominal dimensions of 3-ft x 71.3-ft. WeatherLock® Specialty Tile & Metal (Green Facer) is permitted to be used as prescribed in FBC Section 1507.1.1 and Table 1507.1.1.1. WeatherLock®Specialty Tile & Metal (Green Facer) is permitted to be used with adhered clay or concrete tile roofing using Dupont TILE BOND TM Roof Tile Adhesive. Exposure on the roof deck shall be limited to a maximum 90 days. The maximum roof slope shall be 6:12 when used with clay or concrete tile installations without battens. Tile shall be stored on battens for roof slopes greater than 6:12. Tiles shall not be stacked greater 10 tiles per stack. WeatherLock® WeatherLock®Specialty Tile & Metal (Gray Facer) is an ASTM D 1970 and FRSAfTRI Specialty Tile&Metal Florida High Wind Concrete and Clay Tile Installation Manual, Sixth Edition compliant (Gray Facer) self-adhered underlayment constructed from SBS modified asphalt and surfaced with a (Brentwood, NH) non-woven polyester fabric. The product is supplied in 2.14 sq. rolls with nominal dimensions of 3-ft x 71.3-ft. WeatherLock®Specialty Tile&Metal (Gray Facer)is permitted to be used as prescribed in FBC Section 1507.1.1 and Table 1507.1.1.1. WeatherLock® Specialty Tile & Metal (Gray Facer) is permitted to be used with adhered clay or concrete tile roofing using Dupont TILE BONDTm Roof Tile Adhesive or ICP Adhesive's Polyset RTA-1. Exposure on the roof deck shall be limited to a maximum 180 days. The maximum roof slope shall be 6:12 when used with clay or concrete tile installations without battens. Tile shall be stored on battens for roof slopes greater than 6:12. Tiles shall not be stacked greater 10 tiles per stack. OCR14002.11 a FL9777-R14 Page 2 of 4 This evaluation report is provided for State of Florida product approval under Rule 61 G20-3. The manufacturer shall notify CREEK Technical Services,LLC of any product changes or quality assurance changes throughout the duration for which this report is valid. This evaluation report does not express nor imply warranty, installation, recommended use, or other product attributes that are not specifically addressed herein.