20-1168 - Laserfiche WebLink

Browse Search

DF-52417:D•B-90 ANN-80 � Flre•LITe®ALarms SO-Character.Serial LCD Annunciator by Honeywell Annunciators General The ANN-80 annunciator is a compact, backlit, 80-character LCD fire annunciator that mimics the Fire Alarm Control Panel (FACP) display. It provides system status indicators for AC Power, Alarm, Trouble, Supervisory, and Alarm Silenced conditions. The ANN-80 and the FACP communicate over a two-wire serial interface employ At A - ing the ANN-Bus communication format. Connected devices are IQt powered, via two additional wires, by either the host FACP or a remote UL-listed, filtered power supply. The ANN-80 is red; for white, order ANN-80-W. The ANN-80 displays English-language text of system point informa- tion including device type,zone,independent point alarm,trouble or by,Honeywell supervisory status,as well as any custom alpha labels programmed into the control panel. It includes control switches for remote control of critical system functions. (A keyswitch prevents unauthorized operation of the control switches.) Up to eight ANN-80s may be connected to the ANN-Bus of each FACP.No programming is required,which saves time during system commissioning. Features Supervisory . • Alarm Silenced • Listed to UL Standard 864,9th Edition • Backlit 80-character LCD display(20 characters x 4 lines) Specifications • Mimics all display information from the host panel Operating voltage range: 18 VDC to 28 VDC • Control switches for System Acknowledge, Signal Silence, Drill, Current consumption @ 24 VDC nominal (filtered and non- and Reset resettable):40 mA maximum • Control switches can be independently enabled or disabled at the Ambient temperature:32°F to 120°F(0°C to 49°C) FACP Relative humidity: 93% ± 2% RH (non-condensing) at 32°C ± • Keyswitch enables/disables control switches and mechanically 2°C(90°F t 3°F) locks annunciator enclosure 5.375"(13.65 cm.)high x 6.875"(17.46 cm.)wide x 1.375'(3.49 • Keyswitch can.be enabled or disabled at the FACP cm.)deep • Enclosure supervised for tamper For use indoors in a dry location • System status LEDs for AC Power,Alarm, Trouble, Supervisory, All connections are power-limited and supervised and Alarm Silence • Local sounder can be enabled or disabled at the FACP The ANN-Bus • ANN-80 connects to the ANN-Bus terminal on the FACP and requires minimal panel programming POWERING THE DEVICES ON THE ANN-BUS FROM AUX/L- • Displays device type identifiers, individual point alarm, trouble, IARY POWER SUPPLY supervisory,zone,and custom alpha labels The ANN-Bus can be powered by an auxiliary power supply when • Time-and date display field the maximum number of ANN-Bus devices exceeds the ANN-Bus • Surface mount directly to wall or to single, double, or 4" square power requirements.See the FACP manual for more information. electrical box ANN-BUS DEVICE ADDRESSING • Semi-flush mount to single,-double, or 4" square electrical box. Each ANN-Bus device requires a unique address (ID Number) in Use ANN-SB80KIT for angled view mounting order to communicate with the FACP.A maximum of 8 devices can • Can be remotely located up to 6,000 feet (1,800 m) from the be connected to the FACP ANN-Bus communication circuit.See the panel FACP manual for more information. • Backlight turns off during AC loss to conserve battery power but WIRE REQUIREMENTS: COMMUNICATIONS CIRCUIT will turn back on if an alarm condition occurs • May be powered by 24 VDC-from the host FACP or by remote 'The ANN-80 connects to the FACP ANN-Bus communications cir- power supply(requires 24 VDC) cuit.To determine the type of wire and the maximum wiring distance • Up to eight ANN-80s can be connected on the ANN-Bus that can be used with FACP ANN-Bus.accessory modules, it is nec- essary to calculate the total worst case current draw for all modules on a single 4-conductor bus. The total worst case current draw is Controls and Indicators on by adding the individual worst case currents for each • AC Power module. • Alarm NOTE:For total"worst case current draw on a single ANN-Bus refer to • Trouble appropriate FACP manual. DF-524170•3/15/2018—Page 1 of 2