20-1261 - Laserfiche WebLink

Browse Search

DN-60977:A FSP-951 Series NOTIFIER 0 Intelligent Plug-In Photoelectric Smoke Detectors by Honeywell Devices The NOTIFIER FSP-951 Series intelligent plug-in smoke detectors are designed for both performance and aesthetics. A new modern, sleek,contemporary design and enhanced optical sensing chamber - is engineered to sense smoke produced by a wide range of combus- tion sources in accordance with more stringent code standards.The / FSP-951 Series detector sensitivity can be programmed in the con- trol panel software. Sensitivity is continuously monitored and reported to the panel. Point ID capability allows each detector's f address to be set with rotary, decimal address switches, providing exact detector location for selective maintenance when chamber contamination reaches an unacceptable level. Dual electronic thermistors add 135°F(57°C)fixed temperature thermal sensing on the FSP-951T.The FSP-951 R is a remote test capable detector for use with DNR Series duct detector housings. FSP-951 series detec- tors are available for both FlashScan® and CLIP applications as designated. Features • New modern profile for improved aesthetics. • Designed to meet UL268 7th Edition. FSP-951 in B300-6 Base • Stable communication technique with noise immunity. • Low standby current. • Two-wire SLC connection. FSP-951 R installed in a DNR/DNRW, -20°C to 70°C (-4°F to 158°F). • Compatible with FlashScanO and CLIP protocol systems. UUULC Listed Velocity Range: 0-4000 ft/min. (1219.2 m/min.), • Rotary, decimal addressing (1-99 on CLIP systems, 1-159 on suitable for installation in ducts. FlashScan systems). Relative Humidity: 10%-93%noncondensing. • Optional remote,single-gang LED accessory. • Dual LED design provides 360°viewing angle. Thermal Ratings: Fixed-temperature setpoint 1350F(570C). • Visible bi-color LEDs blink green every time the detector is DETECTOR SPACING AND APPLICATIONS addressed, and illuminate steady red on alarm (FlashScan sys- NOTIFIER recommends spacing detectors in compliance with NFPA tems only). 72. In low airflow applications with smooth ceiling, space detectors • Remote test feature from the panel. 30 feet (9.1 m). For specific information regarding detector spacing, • Walk test with address display(an address on 121 will blink the placement, and special applications refer to NFPA 72. System detector LED: 12-[pause]-1(F/ashScan systems only). Smoke DetectorApplication Guide,document A05-1003,is available • Built-in functional test switch activated by external magnet. at systemsensor.com • Built-in tamper-resistant feature. ELECTRICAL SPECIFICATIONS • Sealed against back pressure. Voltage Range: 15-32 volts DC peak. • Expanded color options. Standby Current(max. avg.): 200pA @ 24VDC(one communica- • SEMS screws for wiring of the separate base. tion every five seconds with LED enabled). • Optional relay,isolator,and sounder bases. LED Current(max.):4.5mA @ 24 VDC("OM'). Specifications Installation Sensitivity: FSP-951 series plug-in detectors use a separate base to simplify • UL Applications:0.5%to 4.0%per foot obscuration. installation,service,and maintenance. • ULC Applications:0.5%to 3.5%per foot obscuration. Mount base (all base types) on an electrical backbox which is at Size:2.0°(5.3 cm)high;base determines diameter. least 1.5° (3.81 cm)deep. For a chart of compatible junction boxes, see DN-60981. —B300-6:6.1°(15.6 cm)diameter. NOTE: 1) Because of inherent supervision provided by the SLC loop, —B501:4°(10.2 cm)diameter. end-of-line resistors are not required. Wiring 7-taps"or branches are For a complete list of detector bases see DN-60981. permitted for Style 4(Class`B)wiring.2) When using relay or sounder Shipping weight:3.4oz(96.4g) bases,consult the ISO-X(A)installation sheet 156-1380 for device limita- tions between isolator modules and isolator bases. Operating Temperature range: • FSP-951,0°C to 500C(320F to 1220F). • FSP-951T,0'C to 3B°C(32°F to 100°F). DN-60977:A•4/17/18—Page 1 of 3