Laserfiche WebLink
MODEL 350 SMARTJACK@ SYSTEM <br /> General Arrangement <br /> ° <br /> Supported <br /> Structure Top Bracket(Varies) ° (Varies) <br /> Post Cap <br /> N <br /> 0] <br /> All-Thread Rod <br /> w <br /> s <br /> _0 <br /> Post <br /> aBi <br /> Cn <br /> Base Base Support <br /> (Varies) (Varies) <br /> ° <br /> Allowable Capacity <br /> The allowable system compression capacity of the assembled SmartJack system is limited to the least value <br /> of the component capacities used in the system assembly. The component capacities are listed in the <br /> Technical Specifications section. <br /> The allowable load applied to the SmartJack system may be limited by the bearing capacity of the existing soil.The <br /> well-compacted crushed stone or recycled concrete base is a proven method to increase supportforthe higher bearing <br /> pressure condition immediately below the base plate or the concrete footing, and then to absorb and distribute <br /> lower pressures to the existing soils.Should settlement of the SmartJack system occur,adjustments are made easily <br /> by extending the all-thread rod. <br /> The SmartJack is designed to support axial compression loads only.The SmartJack does not provide resistance <br /> to tension or lateral loads. <br /> ©2017 Supportworks' Appendix4A <br /> All Rights Reserved 309 SmartJack®Systems <br />