|
IN
<br />I
<br />x..EN U OF bEC I1UN"
<br />SECTION 16426
<br />DISTRIBUTION EQUIPMENT
<br />PART 1-
<br />GENERAL
<br />2.01 MATERIALS
<br />1.01 WORK
<br />INCLUDED
<br />A.
<br />Outlet boxes shall consist of 4" square deep boxes. Provide minimum 3-1/2" deep boxes
<br />unless required otherwise by field conditions.
<br />A.
<br />Standard and custom products equivalent to Square D, NQOD, NF, I -Line panelboards,
<br />B.
<br />Provide backboard in telephone equipment rooms consisting of 3/4" deep X 4' wide X 8'
<br />and QMB switchboards, as well as safety switches, contactors, and starters. Cutler
<br />high AC plywood unless noted otherwise on plans.
<br />Hammer, Siemens, and GE are acceptable manufacturers.
<br />C.
<br />Provide backboards. in tenant spaces consisting of 3/4" deep X 4' wide X 4' high AC
<br />plywood unless noted otherwise on plans.
<br />PART2-PRODUCTS
<br />PART 3
<br />- EXECUTION
<br />2.01 MATERIALS
<br />3.01 INSTALLATION
<br />A.
<br />All distribution gear shall have a ground bus.
<br />B.
<br />For 4-wire systems, the neutral bus shall be the equivalent ampacity as the phase bus bars.
<br />A.
<br />Provide minimum 1" conduits from outlet boxes to accessible space above ceiling. Where
<br />C.
<br />Provide permanent plastic nametag indicating name of each switchboard, panelboard, and
<br />hard ceilings are installed, route conduit to nearest accessible location.
<br />transformer as well as a permanent plastic nametag indicating each load fed for each
<br />B.
<br />Paint both sides of telephone backboards with 2 coats of fire retardant paint prior to
<br />switchboard.
<br />installation.
<br />D.
<br />All panelboards and switchboards shall use bolt -on circuit breaker overcurrent devices.
<br />C.
<br />Provide (1) 2" conduit from main telephone terminal board to telephone terminal board in
<br />E.
<br />Provide circuit breakers UL listed as Type HACR for air conditioning equipment branch
<br />tenant space.
<br />circuits.
<br />D.
<br />Provide ground bar at each telephone backboard location. Provide a #4 Green copper
<br />F.
<br />Do not use tandem circuit breakers.
<br />ground from each ground bar to main telephone systems ground or to building grounding
<br />electrode system.
<br />G.
<br />Safety switches used for service disconnecting means shall be Heavy Duty, 100,000 AIC
<br />E.
<br />Provide a pull string in all conduits.
<br />minimum. All others may be General Duty.
<br />H.
<br />Provide Class L fuses for individual motors, 50 hp and larger; Class J for service mains
<br />including tenant meter disconnects downstream of mains; Class RK5 fuses for all other
<br />***END OF SECTION***
<br />applications.
<br />I.
<br />Refer to panel schedules for ampacities, voltage, phase, NEMA rating, mounting
<br />configuration, AIC rating, and accessories.
<br />J.
<br />Lighting contactors shall have 30 amp rated contacts, minimum.
<br />K.
<br />Provide a typewritten panel directory for each panelboard or loadcenter with sufficient
<br />detail to distinguish each circuit from all others within the panelboard or loadcenter.
<br />L.
<br />Where a shared neutral conductor is used for multiple branch circuits, contractor shall
<br />group circuits together in panel and provide a manufacturer furnished handle -tie to
<br />simultaneously trip all of the circuits sharing the neutral.
<br />PART 3 - EXECUTION
<br />3.01 INSTALLATION
<br />A. Install panelboards plumb with wall finishes with height 6'-6" AFF to top.
<br />B. Provide filler plates for unused spaces in panelboards.
<br />C. Inspect for physical damage, proper alignment, anchorage, and grounding. Check proper
<br />installation and tightness of connections.
<br />D. Rigidly mount disconnects and starters adjacent to load served, maintaining working
<br />clearance required by NEC.
<br />E. Electrical equipment, such as switchboards, panelboards, industrial control panels, meter
<br />socket enclosures, and motor control centers, that are in other than dwelling occupancies,
<br />and are likely to require examination, adjustment, servicing, or maintenance while
<br />energized shall be field marked to warn qualified persons of potential electric arc flash
<br />hazards. Provide factory labels to comply.
<br />***END OF SECTION***
<br />SECTION 16500
<br />INTERIOR LIGHTING
<br />PART 1-GENERAL
<br />1.01 QUALITY ASSURANCE
<br />A. Comply with NEC requirements as applicable to wiring types and lengths for fixture
<br />whips. Provide lighting components and fittings that are UL-listed and labeled.
<br />PART 2 - PRODUCTS
<br />2.01 MATERIALS
<br />A. Lighting fixtures shall be the type indicated on Drawings and as specified. Fixtures of same
<br />type shall be of identical make, design, and appearance. Size of lighting fixtures shall be as
<br />specified for the lamp or fixture wattage indicated on Drawings. Specific manufacturer and
<br />model number references are indicated as a standard of quality and other manufacturers
<br />may be supplied provided the product meets or exceeds the specifications.
<br />B. Ballasts shall comply with applicable state, federal and industry performance safety
<br />standards including FCC requirements governing electromagnetic and radio frequency
<br />interference, IEEE standards for line voltage transient protection and harmonic distortion.
<br />C. Ballasts shall comply with 2008 NEC 410.130 (G) requirement for integral disconnecting
<br />means.
<br />D. Provide lamps with lighting fixtures. Lamps shall be as manufactured by General Electric,
<br />Philips, Venture, or Sylvania.
<br />E. Fluorescent lamps shall be 835.
<br />PART 3 - EXECUTION
<br />3.01 INSTALLATION
<br />A. Clean surfaces of dirt, cement, plaster and debris. Furnish cleansers compatible with
<br />material surfaces being cleaned.
<br />B. Replace defective lamps and ballasts.
<br />C. Support recessed fixtures in ceilings as follows: Fixtures shall be independently supported
<br />from structure above using (2) ceiling tie -wires per fixture at diagonal corners.
<br />D. Recessed fixtures shall fit snugly against ceilings to prevent light leakage.
<br />E. Light fixtures and associated wiring shall be installed in accordance with NEC Article 410.
<br />***END OF SECTION**
<br />SECTION 16741
<br />TELEPHONE AND DATA SYSTEM
<br />PART1-GENERAL
<br />1.01 QUALITY ASSURANCE
<br />A. Comply with applicable requirements of NEMA and UL standards. Provide products and
<br />components that have been UL listed and labeled.
<br />PART 2 - PRODUCTS
<br />PROJECT DEMOLITION NOTES
<br />1. CONTRACTOR SHALL VISIT THE SITE PRIOR TO BID AND BECOME AWARE OF ALL
<br />EXISTING CONDITIONS AFFECTING THEIR WORK PRIOR TO BID.
<br />2. CONTRACTOR SHALL VERIFY THAT EXISTING ELECTRICAL WORK TO REMAIN IS
<br />PROPERLY INSTALLED IN ACCORDANCE WITH APPLICABLE CODES.
<br />CONTRACTOR WILL NOT SUBMIT CHANGE ORDER REQUESTS PERTAINING TO
<br />CORRECTIVE ACTION FOR THESE ITEMS, RATHER INCLUDE IN ORIGINAL BID ANY
<br />COSTS ASSOCIATED WITH CORRECTIVE ACTION.
<br />3. CONTRACTOR IS ADVISED THAT EXISTING LOADS AND CONTROLS TO REMAIN
<br />INCLUDE HVAC AND EXISTING RECEPTACLES (WHERE COMPATIBLE WITH THE
<br />RENOVATION). CARE SHOULD BE TAKEN TO ENSURE THESE LOADS ARE
<br />PROPERLY CONNECTED UPON COMPLETION.
<br />4. EXISTING CONDUITS, WHERE APPLICABLE, MAY BE REUSED.
<br />5. CONTRACTOR SHALL REMOVE THOSE ITEMS WHICH ARE NOT REUSED DUE TO
<br />RENOVATIONS AND PROPERLY DISPOSE OF OFF SITE. THIS INCLUDES BUT IS NOT
<br />LIMITED TO LINE AND LOW VOLTAGE CONDUCTORS, RACEWAYS, SAFETY
<br />SWITCHES, LIGHT FIXTURES, RECEPTACLES, ETC.
<br />6. WHERE PANEL SCHEDULES INDICATE NEW CIRCUIT BREAKERS ARE TO BE
<br />INSTALLED, CONTRACTOR SHALL MAINTAIN PANELBOARD/LOAD CENTER UL
<br />AND AIC RATING.
<br />7. CONTRACTOR SHALL REPLACE DEFECTIVE LAMPS AND BALLASTS AND CLEAN
<br />LENS/LOUVER/FIXTURE FOR FIXTURES WHICH ARE TO REMAIN.
<br />8. CONTRACTOR SHALL SCHEDULE ANY DISRUPTION WHICH MAY OCCUR TO
<br />OTHER TENANTS IN THE BUILDING WITH THOSE TENANTS AND THE LANDLORD
<br />ONE WEEK PRIOR TO THE REQUIRED EVENT.
<br />ELECTRICAL LEGEND
<br />SYMBOL
<br />DESCRIPTION
<br />MOUNTING
<br />SYMBOL
<br />DESCRIPTION
<br />MOUNTING
<br />O
<br />CEILING LIGHT FIXTURE.
<br />SEE FIXTURE SCHEDULE.
<br />DUPLEX RECEPTACLE. SEE SPECIFICATIONS.
<br />16" AFF TO CENTERLINE UON.
<br />0
<br />CEILING LIGHT FIXTURE WITH EMERGENCY POWER BACKUP.
<br />SEE FIXTURE SCHEDULE.
<br />DUPLEX RECEPTACLE, ABOVE COUNTER. SEE SPECIFICATIONS.
<br />44" AFF TO CENTERLINE UON.
<br />O --
<br />WALL WASH LIGHT FIXTURE. ARROW INDICATES WASH DIRECTION.
<br />SEE FIXTURE SCHEDULE.
<br />rn
<br />11"
<br />DUPLEX RECEPTACLE, ONE-HALF SWITCHED. SEE SPECIFICATIONS.
<br />16" AFF TO CENTERLINE UON.
<br />4
<br />WALL BRACKET LIGHT FIXTURE.
<br />SEE FIXTURE SCHEDULE.
<br />®
<br />DUPLEX RECEPTACLE, FLOOR OR POKE-THRU. SEE SPECIFICATIONS.
<br />FLUSH IN FLOOR UON.
<br />WALL BRACKET LIGHT FIXTURE WITH EMERGENCY POWER BACKUP.
<br />SEE FIXTURE SCHEDULE.
<br />_
<br />DOUBLE DUPLEX RECEPTACLE. SEE SPECIFICATIONS.
<br />16" AFF TO CENTERLINE UON.
<br />Q
<br />WALL BRACKET LIGHT FIXTURE.
<br />SEE FIXTURE SCHEDULE.
<br />DOUBLE DUPLEX RECEPTACLE, ABOVE COUNTER. SEE SPECIFICATIONS.
<br />44" AFF TO CENTERLINE UON.
<br />WALL BRACKET LIGHT FIXTURE WITH EMERGENCY POWER BACKUP.
<br />SEE FIXTURE SCHEDULE.
<br />T
<br />SIMPLEX RECEPTACLE. SEE SPECIFICATIONS.
<br />16" AFF TO CENTERLINE UON.
<br />WALL MOUNTED SCONCE LIGHT FIXTURE
<br />SEE FIXTURE SCHEDULE.
<br />SPECIAL RECEPTACLE. NEMA CONFIGURATION AS NOTED.
<br />68" AFF TO CENTERLINE UON.
<br />Ah
<br />WALL MOUNTED SCONCE LIGHT FIXTURE WITH EMERGENCY POWER
<br />BACKUP.
<br />SEE FIXTURE SCHEDULE.
<br />MULTI -OUTLET SURFACE RACEWAY WITH NEMA 5-15R SIMPLEX
<br />RECEPTACLES AT 12" CENTERS UON.
<br />44" AFF TO CENTERLINE UON.
<br />®
<br />®
<br />V X V LIGHT FIXTURE.
<br />SEE FIXTURE SCHEDULE.
<br />no
<br />208Y/ 120V OR 240/ 120V PANELBOARD.
<br />78" AFF TO TOP.
<br />®
<br />V X 1' LIGHT FIXTURE WITH. EMERGENCY POWER BACKUP.
<br />SEE FIXTURE SCHEDULE.
<br />105—
<br />277Y/480V PANELBOARD.
<br />78" AFF TO TOP.
<br />®
<br />2' X 2' LIGHT FIXTURE.
<br />SEE FIXTURE SCHEDULE.
<br />'�
<br />DISCONNECT SWITCH.
<br />NEMA/AMPS/POLE/FUSE/VOLTAGE. PROVIDE NEMA 1, 600V UON.
<br />AS NOTED.
<br />2' X T LIGHT FIXTURE WITH EMERGENCY POWER BACKUP.
<br />SEE FIXTURE SCHEDULE.
<br />m
<br />MOTOR STARTER.
<br />AS NOTED.
<br />2' X 4' LIGHT FIXTURE.
<br />SEE FIXTURE SCHEDULE.
<br />MJ
<br />COMBINATION MOTOR STARTER/DISCONNECT SWITCH.
<br />NEMA/AMPS/POLE/FUSE/VOLTAGE. PROVIDE NEMA 1, 600V UON.
<br />AS NOTED.
<br />2' X T LIGHT FIXTURE WITH EMERGENCY POWER BACKUP.
<br />SEE FIXTURE SCHEDULE.
<br />EM4::p
<br />ELECTRIC DUCT HEATER.
<br />BY OTHERS.
<br />SURFACE MOUNTED LIGHT FIXTURE.
<br />SEE FIXTURE SCHEDULE.
<br />N
<br />MOTOR CONNECTION OR EXHAUST FAN.
<br />BY OTHERS.
<br />®
<br />SURFACE MOUNTED LIGHT FIXTURE WITH EMERGENCY POWER
<br />BACKUP.
<br />SEE FIXTURE SCHEDULE.
<br />Q
<br />POWER POLE WITH POWER AND COMMUNICATIONS RACEWAY
<br />PROVISIONS AS NOTED.
<br />AS NOTED.
<br />WALL MOUNTED LIGHT FIXTURE.
<br />SEE FIXTURE SCHEDULE.
<br />v
<br />COMMUNICATIONS/DATA OUTLET.
<br />16" AFF TO CENTERLINE UON.
<br />WALL MOUNTED LIGHT FIXTURE WITH EMERGENCY POWER BACKUP.
<br />SEE FIXTURE SCHEDULE.
<br />®
<br />COMMUNICATIONS/DATA OUTLET, FLOOR OR POKE-THRU.
<br />FLUSH IN FLOOR UON.
<br />I--O-i
<br />FLUORESCENT STRIP LIGHT FIXTURE.
<br />SEE FIXTURE SCHEDULE.
<br />®
<br />COMBINATION COMMUNICATIONS/DATA AND DUPLEX RECEPTACLE
<br />OUTLET, FLOOR BOX.
<br />FLUSH IN FLOOR UON.
<br />FLUORESCENT STRIP LIGHT FIXTURE WITH EMERGENCY POWER
<br />BACKUP.
<br />SEE FIXTURE SCHEDULE.
<br />®
<br />COMBINATION COMMUNICATIONS/DATA AND QUAD RECEPTACLE
<br />OUTLET, FIRE RATED POKE-THRU.
<br />FLUSH IN FLOOR UON.
<br />00--
<br />FLOOD LIGHT FIXTURE.
<br />SEE FIXTURE SCHEDULE.
<br />P D
<br />FURNITURE SYSTEM BASE FEED (POWER AND DATA), REFER TO NOTES
<br />AND SPECIFICATIONS.
<br />AS NOTED.
<br />yy
<br />TRACK LIGHT FIXTURE (STRAIGHT).
<br />SEE FIXTURE SCHEDULE.
<br />4
<br />CABLE TV OUTLET.
<br />18" AFF TO CENTERLINE UON.
<br />TRACK LIGHT FIXTURE (CURVED).
<br />SEE FIXTURE SCHEDULE.
<br />4
<br />SECURITY SYSTEM CARD READER OUTLET.
<br />48" AFF TO CENTERLINE UON.
<br />PENDANT MOUNTED LIGHT FIXTURE.
<br />SEE FIXTURE SCHEDULE.
<br />4
<br />SECURITY SYSTEM PUSH -PAD OUTLET.
<br />48" AFF TO CENTERLINE UON.
<br />ACCENT LIGHT FIXTURE.
<br />SEE FIXTURE SCHEDULE.
<br />SECURITY SYSTEM CLOSED CIRCUIT TV CAMERA.
<br />AS NOTED.
<br />CEILING FAN.
<br />SEE FIXTURE SCHEDULE.
<br />®
<br />FIRE ALARM SYSTEM CONTROL PANEL.
<br />78" AFF TO TOP.
<br />®
<br />SINGLE -FACE CEILING MOUNTED EXIT SIGN WITH AIMING ARROWS AS
<br />INDICATED. FILL REPRESENTS READABLE FACE DIRECTION.
<br />SEE FIXTURE SCHEDULE.
<br />®
<br />FIRE ALARM SYSTEM REMOTE ANNUNCIATOR PANEL.
<br />66" AFF TO TOP.
<br />TWO -FACE CEILING MOUNTED EXIT SIGN WITH AIMING ARROWS AS
<br />INDICATED. FILL REPRESENTS READABLE FACE DIRECTION.
<br />SEE FIXTURE SCHEDULE.
<br />Q
<br />FIRE ALARM SYSTEM SMOKE DETECTOR.
<br />CEILING UON.
<br />WALL MOUNTED EXIT SIGN WITH AIMING ARROWS AS INDICATED.
<br />FILL REPRESENTS READABLE FACE DIRECTION.
<br />SEE FIXTURE SCHEDULE.
<br />s
<br />FIRE ALARM SYSTEM DUCT TYPE SMOKE DETECTOR.
<br />IN SUPPLY DUCT > 2,000 CFM
<br />IN RETURN DUCT > 15,000 CFM
<br />WALL MOUNTED EMERGENCY BATTERY PACK LIGHT FIXTURE.
<br />SEE FIXTURE SCHEDULE.
<br />FIRE ALARM SYSTEM HEAT DETECTOR.
<br />CEILING UON.
<br />'
<br />COMBINATION EMERGENCY BATTERY LIGHT AND EXIT SIGN WITH
<br />.AIMING ARROWS AS INDICATED. FILL REPRESENTS READABLE FACE.
<br />SEE FIXTURE SCHEDULE.
<br />FIRE ALARM SYSTEM PULL STATION.
<br />48" AFF TO CENTERLINE UON.
<br />OC]
<br />POLE MOUNTED LIGHT FIXTURE.
<br />SEE FIXTURE SCHEDULE.
<br />T�
<br />FIRE ALARM SYSTEM TAMPER SWITCH.
<br />FIELD COORDINATE.
<br />SINGLE -POLE TOGGLE SWITCH.
<br />48" AFF TO CENTERLINE UON.
<br />❑F
<br />FIRE ALARM SYSTEM FLOW SWITCH.
<br />FIELD COORDINATE.
<br />$2
<br />TWO -POLE TOGGLE SWITCH.
<br />48" AFF TO CENTERLINE UON.
<br />®
<br />FIRE ALARM SYSTEM RELAY CONTROL MODULE.
<br />FIELD COORDINATE.
<br />$3
<br />THREE-WAY TOGGLE SWITCH.
<br />48" AFF TO CENTERLINE UON.
<br />M❑
<br />FIRE ALARM SYSTEM MONITORING MODULE.
<br />FIELD COORDINATE.
<br />$4
<br />FOUR-WAY TOGGLE SWITCH.
<br />48" AFF TO CENTERLINE UON.
<br />❑D
<br />FIRE ALARM SYSTEM MAGNETIC DOOR HOLDER.
<br />ON WALL 6" BELOW TOP OF
<br />DOOR.
<br />$°
<br />OCCUPANCY SENSOR SWITCH.
<br />48" AFF TO CENTERLINE UON.
<br />FIRE ALARM SYSTEM HORN.
<br />80" AFF TO BOTTOM.
<br />$M
<br />MOMENTARY CONTACT TOGGLE SWITCH.
<br />48" AFF TO CENTERLINE UON.
<br />®
<br />FIRE ALARM SYSTEM STROBE, 75 CANDELA UON.
<br />80" AFF TO BOTTOM.
<br />$T
<br />TIMER SWITCH.
<br />48" AFF TO CENTERLINE UON.
<br />FIRE ALARM SYSTEM HORN/STROBE, 75 CANDELA UON.
<br />80" AFF TO BOTTOM.
<br />0100
<br />DIMMER SWITCH. PROVIDE WATTAGE RATING INDICATED.
<br />48" AFF TO CENTERLINE UON.
<br />FIRE ALARM SYSTEM CEILING MOUNTED HORN/STROBE, 75 CANDELA
<br />UON.
<br />SURFACE ON CEILING.
<br />CEILING MOUNTED OCCUPANCY SENSOR SWITCH.
<br />CEILING UON.
<br />u
<br />FIRE ALARM SYSTEM MINI -HORN.
<br />80" AFF TO BOTTOM.
<br />0
<br />JUNCTION BOX OR OUTLET BOX.
<br />AS NOTED.
<br />R
<br />FIRE ALARM SYSTEM BELL.
<br />96" AFF TO TOP UON.
<br />-----II-
<br />GROUND ROD.
<br />AS NOTED.
<br />o •
<br />UP DN
<br />CONDUIT RUN UP OR DOWN AS NOTED.
<br />\
<br />CONDUIT CONCEALED IN WALL OR ABOVE CEILING.
<br />SEE SPECIFICATIONS.
<br />PHASE, NEUTRAL, EQUIPMENT GROUND, AND ISOLATED GROUND.
<br />ALL HOMERUNS SHALL BE 1/2" CONDUIT WITH 3 #12 UON.
<br />1'
<br />CONDUIT CONCEALED IN SLAB OR UNDERGROUND.
<br />SEE SPECIFICATIONS.
<br />00
<br />REFER TO KEYED NOTES.
<br />-------
<br />CONDUIT EXPOSED ON WALL OR CEILING.
<br />SEE SPECIFICATIONS.
<br />ABBREVIATIONS
<br />ABBREVIATIONS
<br />AFF
<br />ABOVE FINISHED FLOOR.
<br />HID
<br />HIGH INTENSITY DISCHARGE.
<br />AFG
<br />ABOVE FINISHED GRADE.
<br />HP
<br />HORSEPOWER.
<br />ATS
<br />AUTOMATIC TRANSFER SWITCH.
<br />IG
<br />ISOLATED GROUND.'
<br />BFG
<br />BELOW FINISH GRADE.
<br />LCP
<br />LIGHTING CONTROL PANEL
<br />C
<br />CONDUIT.
<br />LSIG
<br />LONG, SHORT, INSTANTANEOUS, GROUND FAULT TRIP SETTINGS.
<br />CLG
<br />CEILING MOUNTED.
<br />N
<br />NEW.
<br />DN
<br />CONDUIT DOWN.
<br />NEUT
<br />NEUTRAL.
<br />E
<br />EXISTING.
<br />NF
<br />NON -FUSED.
<br />EC
<br />ELECTRICAL CONTRACTOR.
<br />NL
<br />NIGHT LIGHT.
<br />EG
<br />EQUIPMENT GROUND.
<br />NP
<br />NAMEPLATE.
<br />EXP
<br />EXPLOSION PROOF.
<br />PNL
<br />PANEL.
<br />EWC
<br />ELECTRIC WATER COOLER.
<br />RE
<br />RELOCATED.
<br />EWH
<br />ELECTRIC WATER HEATER.
<br />UON
<br />UNLESS OTHERWISE NOTED.
<br />FTL
<br />FEED THRU LUGS (FEED DOWNSTREAM SECTION WITH IDENTICAL FEEDER AS PREVIOUS SECTION)
<br />UPS
<br />UNINTERRUPTIBLE POWER SUPPLY.
<br />GEC
<br />GROUNDING ELECTRODE CONDUCTOR.
<br />WP
<br />WEATHERPROOF.
<br />GFI
<br />GROUND FAULT INTERRUPTER (BREAKER) / GROUND FAULT CIRCUIT INTERRRUPTER (RECEPTACLE).
<br />XFMR
<br />TRANSFORMER
<br />3
<br />11eiEwlaf
<br />ee +s
<br />\G E SF
<br />No. 22
<br />-.0 STATE OF
<br />s
<br />X
<br />w
<br />I—
<br />Z
<br />L.LI
<br />U
<br />Q
<br />0
<br />z
<br />_J
<br />o
<br />J�
<br />0
<br />_J
<br />Iz
<br />O
<br />J
<br />O
<br />ILL
<br /><=
<br />W
<br />>:
<br />�--
<br />w
<br />>-
<br />Z
<br />LIJ
<br />�
<br />Q
<br />=
<br />O
<br />U
<br />0
<br />Qcn
<br />�+
<br />W
<br />a
<br />N
<br />w
<br />Z
<br />O
<br />i—
<br />SAVE-A-LOT
<br />TENANT BUILD -OUT
<br />RENOVATION
<br />PROJECT ADDRESS:
<br />TOWNVIEW SQUARE SHOPPING CENTER
<br />7320 GALL BLVD.
<br />ZEPHYRHILLS, FLORIDA 33541
<br />PASCO COUNTY
<br />SUPERVALU
<br />COMPANY
<br />CLIENT ADDRESS:
<br />100 CORPORATE OFFICE DR.
<br />EARTH CITY, MISSOURI
<br />DATE DESCRIPTION
<br />09-02-10 OWNER REVIEW
<br />09-08-10 PERMIT DRAWINGS
<br />LEGEND AND SPECIFICATIONS
<br />ASH
<br />PROJECT #: 710-009
<br />E002
<br />09-02-10
<br />
|