Laserfiche WebLink
SKILLED NURSING - 10 BED CONVERSION FLTSP15008 <br />d. For doors with heights more than 120 inches, provide 4 hinges, plus 1 hinge <br />for every 30 inches of door height greater than 120 inches. <br />2. Hinge Size: Provide the following, unless otherwise indicated, with hinge widths sized <br />for door thickness and clearances required: <br />a. Widths up to 3'0": 4-1/2" standard or heavy weight as specified. <br />b. Sizes from 3' 1" to 4'0": 5" standard or heavy weight as specified. <br />3. Hinge Weight and Base Material: Unless otherwise indicated, provide the following: <br />a. Exterior Doors: Heavy weight, non-ferrous, ball bearing or oil impregnated <br />bearing hinges unless Hardware Sets indicate standard weight. <br />b. Interior Doors: Standard weight, steel, ball bearing or oil impregnated <br />bearing hinges unless Hardware Sets indicate heavy weight. <br />4. Hinge Options: Comply with the following where indicated in the Hardware Sets or on <br />Drawings: <br />a. Non -removable Pins: Provide set screw in hinge barrel that, when tightened <br />into a groove in hinge pin, prevents removal of pin while door is closed; for <br />the all out -swinging lockable doors. <br />5. Acceptable Manufacturers: Basis of Design. <br />a. McKinney Products (MK). <br />B. Continuous Geared Hinges: ANSIBHMA A156.26 Grade 1-600 certified continuous geared <br />hinge. with minimum 0.120-inch thick extruded 6060 T6 aluminum alloy hinge leaves and a <br />minimum overall width of 4 inches. Hinges are non -handed, reversible and fabricated to <br />template screw locations. Factory trim hinges to suit door height and prepare for electrical cut- <br />outs. <br />1. Acceptable Manufacturers: Basis of Design. <br />a. Pemko Manufacturing (PE). <br />C. Continuous Geared Double-acting Hinges. ANSIBHMA A156.26 Grade 1-600 Certified <br />continuous geared hinges. Hinges are non -handed and allow the door to swing up to 100 <br />degrees in either direction. <br />1. Acceptable Manufacturers: Basis of Design. <br />a. Pemko Manufacturing (PE) — DHS Series. <br />2.3 POWER TRANSFER DEVICES <br />A. Electrified Quick Connect Continuous Geared Transfer Hinges: Provide electrified transfer <br />continuous geared hinges with a 12" removable service panel cutout accessible without de - <br />DOOR HARDWARE 087100 - 7 <br />